If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Worried about BFG6800OC
Hi.
I'm about to order all the parts to attempt to build myself a new PC Would really appreciate some help!! Please.. I'm really worried about a few things, mainly, will everything be compatible, especially the Motherboard, CPU, RAM, and HDD. I'm also worried about what cables i may need, and if I have everything for the BFG graphics card that I'm planning to get. The system requirements for it are confusing me as to whether i will need to order extra cables etc, and even get a bigger PSU. BFG System Requirements: A minimum 480W system power supply, An AGP 2.0 (or higher) compliant, motherboard. Some motherboards violate the AGP specification and therefore this card may not physically fit in some systems. A vacant PCI slot adjacent to the AGP slot. This board occupies two slots: one AGP and one PCI. Two available hard disk drive power dongles (smaller floppy disk drive connector is not sufficient). For instance, it says 2 available hard disk drive power dongles?? Where do I order these from? or will they be included with my PSU? Also, will my Mother board be AGP 2.0 compliant? ---------------------------------------------------------------------------- - The parts i have ready to order: Motherboard: Abit AV8 SKT939 K8T800PRO 800FSB 8xAGP SATA Sound GIG LAN Retail Box from he http://www.ebuyer.com/customer/produ...duct_uid=64800 More info he http://www.abit-usa.com/products/mb/...es=1&model=175 PSU Antec PSU True Blue 480w Blue Led Fan from he http://www.ebuyer.com/customer/produ...duct_uid=43567 Will it be powerful enough and have enough cables for the BFG and everything else??? MEMORY I'll be getting this: Kingston 1GB 400MHz DDR Non-ECC CL3 (3-3-3) DIMM (Kit 2) From: http://www.ebuyer.com/customer/produ...duct_uid=49296 As far as i can see, it will be compatible with the motherboard. CASE The case I will be getting is this: Antec Plusview 1000 4x5.25 5x3.5 ATX Tower Case with Side Window From he http://www.ebuyer.com/customer/produ...duct_uid=44356 It says compliant for AMD so i'm hoping it will be ok. CPU Athlon 64 3500+ S939 512Kb Box From he http://www.dabs.com/uk/Search2/Produ...n%2064%203500# HDD Western Digital WD2000JD 200GB Serial ATA150 7200rpm 8mb Cache- OEM from he http://www.ebuyer.com/customer/produ...duct_uid=55240 Cables so far: 1x Belkin Serial ATA 2.0 7-pin Cable - Red 18" for the hard drive. Will i need any more? 1x Ebuyer AC Power Lead (Kettle Type) Suitable for ATX PSU 1x Ebuyer 6" Internal Power Y Splitter Cable I'm worried i'm going to receive all the parts, and then have to order more.. By the way, how good will the sound be on the motherboard, would it support dolby 5.1? I'm going to order some 5.1 speakers. Also, i'm wondering about will i need any ports? usb like at the back of my existing system? Or do they come with the case or motherboard? Ive also got on my list to order, a monitor, anti static wrist band, windows xp software, disk drives, sound card etc etc, but its the above that the most important. Many many thanks for any help. If everything looks fine i'm going to order it as soon as. Chris |
#2
|
|||
|
|||
"Chris" picturesofengland(on wrote in message
... Hi. I'm about to order all the parts to attempt to build myself a new PC Would really appreciate some help!! Please.. I'm really worried about a few things, mainly, will everything be compatible, especially the Motherboard, CPU, RAM, and HDD. I'm also worried about what cables i may need, and if I have everything for the BFG graphics card that I'm planning to get. The system requirements for it are confusing me as to whether i will need to order extra cables etc, and even get a bigger PSU. BFG System Requirements: A minimum 480W system power supply, An AGP 2.0 (or higher) compliant, motherboard. Some motherboards violate the AGP specification and therefore this card may not physically fit in some systems. A vacant PCI slot adjacent to the AGP slot. This board occupies two slots: one AGP and one PCI. Two available hard disk drive power dongles (smaller floppy disk drive connector is not sufficient). For instance, it says 2 available hard disk drive power dongles?? Where do I order these from? or will they be included with my PSU? Also, will my Mother board be AGP 2.0 compliant? -------------------------------------------------------------------------- -- - The parts i have ready to order: Motherboard: Abit AV8 SKT939 K8T800PRO 800FSB 8xAGP SATA Sound GIG LAN Retail Box from he http://www.ebuyer.com/customer/produ...duct_uid=64800 More info he http://www.abit-usa.com/products/mb/...es=1&model=175 PSU Antec PSU True Blue 480w Blue Led Fan from he http://www.ebuyer.com/customer/produ...duct_uid=43567 Will it be powerful enough and have enough cables for the BFG and everything else??? MEMORY I'll be getting this: Kingston 1GB 400MHz DDR Non-ECC CL3 (3-3-3) DIMM (Kit 2) From: http://www.ebuyer.com/customer/produ...duct_uid=49296 As far as i can see, it will be compatible with the motherboard. CASE The case I will be getting is this: Antec Plusview 1000 4x5.25 5x3.5 ATX Tower Case with Side Window From he http://www.ebuyer.com/customer/produ...duct_uid=44356 It says compliant for AMD so i'm hoping it will be ok. CPU Athlon 64 3500+ S939 512Kb Box From he http://www.dabs.com/uk/Search2/Produ...n%2064%203500# HDD Western Digital WD2000JD 200GB Serial ATA150 7200rpm 8mb Cache- OEM from he http://www.ebuyer.com/customer/produ...duct_uid=55240 Cables so far: 1x Belkin Serial ATA 2.0 7-pin Cable - Red 18" for the hard drive. Will i need any more? 1x Ebuyer AC Power Lead (Kettle Type) Suitable for ATX PSU 1x Ebuyer 6" Internal Power Y Splitter Cable I'm worried i'm going to receive all the parts, and then have to order more.. By the way, how good will the sound be on the motherboard, would it support dolby 5.1? I'm going to order some 5.1 speakers. Also, i'm wondering about will i need any ports? usb like at the back of my existing system? Or do they come with the case or motherboard? Ive also got on my list to order, a monitor, anti static wrist band, windows xp software, disk drives, sound card etc etc, but its the above that the most important. Many many thanks for any help. If everything looks fine i'm going to order it as soon as. Chris Well Chris, it sounds like a great system. The BFG Card comes with 2 Power dongle splitters but you won't need them. Your PSU will have plenty of dongles for you to plug it in (barring you don't add a ton of hard drives, etc... like I did!) You left out HL2! MJ |
#3
|
|||
|
|||
WOOHOO!
HL2 coming mid November!!! WOOHOO Nice system! "MJ" wrote in message nk.net... "Chris" picturesofengland(on wrote in message ... Hi. I'm about to order all the parts to attempt to build myself a new PC Would really appreciate some help!! Please.. I'm really worried about a few things, mainly, will everything be compatible, especially the Motherboard, CPU, RAM, and HDD. I'm also worried about what cables i may need, and if I have everything for the BFG graphics card that I'm planning to get. The system requirements for it are confusing me as to whether i will need to order extra cables etc, and even get a bigger PSU. BFG System Requirements: A minimum 480W system power supply, An AGP 2.0 (or higher) compliant, motherboard. Some motherboards violate the AGP specification and therefore this card may not physically fit in some systems. A vacant PCI slot adjacent to the AGP slot. This board occupies two slots: one AGP and one PCI. Two available hard disk drive power dongles (smaller floppy disk drive connector is not sufficient). For instance, it says 2 available hard disk drive power dongles?? Where do I order these from? or will they be included with my PSU? Also, will my Mother board be AGP 2.0 compliant? -------------------------------------------------------------------------- -- - The parts i have ready to order: Motherboard: Abit AV8 SKT939 K8T800PRO 800FSB 8xAGP SATA Sound GIG LAN Retail Box from he http://www.ebuyer.com/customer/produ...duct_uid=64800 More info he http://www.abit-usa.com/products/mb/...es=1&model=175 PSU Antec PSU True Blue 480w Blue Led Fan from he http://www.ebuyer.com/customer/produ...duct_uid=43567 Will it be powerful enough and have enough cables for the BFG and everything else??? MEMORY I'll be getting this: Kingston 1GB 400MHz DDR Non-ECC CL3 (3-3-3) DIMM (Kit 2) From: http://www.ebuyer.com/customer/produ...duct_uid=49296 As far as i can see, it will be compatible with the motherboard. CASE The case I will be getting is this: Antec Plusview 1000 4x5.25 5x3.5 ATX Tower Case with Side Window From he http://www.ebuyer.com/customer/produ...duct_uid=44356 It says compliant for AMD so i'm hoping it will be ok. CPU Athlon 64 3500+ S939 512Kb Box From he http://www.dabs.com/uk/Search2/Produ...n%2064%203500# HDD Western Digital WD2000JD 200GB Serial ATA150 7200rpm 8mb Cache- OEM from he http://www.ebuyer.com/customer/produ...duct_uid=55240 Cables so far: 1x Belkin Serial ATA 2.0 7-pin Cable - Red 18" for the hard drive. Will i need any more? 1x Ebuyer AC Power Lead (Kettle Type) Suitable for ATX PSU 1x Ebuyer 6" Internal Power Y Splitter Cable I'm worried i'm going to receive all the parts, and then have to order more.. By the way, how good will the sound be on the motherboard, would it support dolby 5.1? I'm going to order some 5.1 speakers. Also, i'm wondering about will i need any ports? usb like at the back of my existing system? Or do they come with the case or motherboard? Ive also got on my list to order, a monitor, anti static wrist band, windows xp software, disk drives, sound card etc etc, but its the above that the most important. Many many thanks for any help. If everything looks fine i'm going to order it as soon as. Chris Well Chris, it sounds like a great system. The BFG Card comes with 2 Power dongle splitters but you won't need them. Your PSU will have plenty of dongles for you to plug it in (barring you don't add a ton of hard drives, etc... like I did!) You left out HL2! MJ |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CPU Temp - when to get worried ? | mikea | Overclocking AMD Processors | 7 | December 13th 04 01:36 PM |
Should I be worried about my HDD temps? | Derek | General | 12 | November 6th 04 09:04 AM |
Should I be worried about my HDD temps? | Derek | Homebuilt PC's | 10 | November 6th 04 09:04 AM |
Worried about temperature | Twitchin | Gigabyte Motherboards | 8 | August 23rd 04 08:43 PM |
Worried (Cat3.6) | Gareth Edwards | Ati Videocards | 2 | July 26th 03 12:14 AM |