If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
New Project_i7 920 Nehalem build
Got everything except the motherboard yesterday. I will be reusing my 2 EVGA
Superclocked 8800 GTX cards in SLI. I don't think that will be a bottleneck yet. OS will be Vista Ultimate 64bit. Components: Antec Nine Hundred Black Steel ATX Mid Tower Computer Case CORSAIR XMS3 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Triple Channel Kit Desktop Memory Model TR3X6G1333C9 ASUS P6T Deluxe/OC Palm LGA 1366 Intel X58 ATX Intel Motherboard Intel Core i7 920 Nehalem 2.66GHz LGA 1366 130W Quad-Core Processor Model BX80601920 PC Power & Cooling S75QB 750W ATX12V / EPS12V SLI NVIDIA SLI Certified Active PFC Power Supply Thermaltake V1 Max-Performance CPU Cooler with Massive 110mm Blue LED Full-Range Variable Speed Fan Intel Core i7 Extreme Edition & Core i7 Ready LGA 1366 CL-P0401 2X SAMSUNG 22X DVD Burner Black SATA Model SH-S223F Western Digital RE3 WD1002FBYS 1TB 7200 RPM SATA 3.0Gb/s Hard Drive Any comments or other recomendations are appreciated.... This is my first build without a floppy...:-). I have several around if I decide to slap one in. The Thermaltake V1 would probably not be my main choice of HS/Fan, but there isn't a lot of choices out there for this processor yet. My goal is to try and get to 3.5+Ghz if at all possible. I can go liquid cooling if need be, but would rather try for a quiet air cooled system. Ed |
#2
|
|||
|
|||
New Project_i7 920 Nehalem build
Somewhere on teh intarwebs "Ed Medlin" typed:
Got everything except the motherboard yesterday. I will be reusing my 2 EVGA Superclocked 8800 GTX cards in SLI. I don't think that will be a bottleneck yet. OS will be Vista Ultimate 64bit. Components: Antec Nine Hundred Black Steel ATX Mid Tower Computer Case CORSAIR XMS3 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Triple Channel Kit Desktop Memory Model TR3X6G1333C9 ASUS P6T Deluxe/OC Palm LGA 1366 Intel X58 ATX Intel Motherboard Intel Core i7 920 Nehalem 2.66GHz LGA 1366 130W Quad-Core Processor Model BX80601920 PC Power & Cooling S75QB 750W ATX12V / EPS12V SLI NVIDIA SLI Certified Active PFC Power Supply Thermaltake V1 Max-Performance CPU Cooler with Massive 110mm Blue LED Full-Range Variable Speed Fan Intel Core i7 Extreme Edition & Core i7 Ready LGA 1366 CL-P0401 2X SAMSUNG 22X DVD Burner Black SATA Model SH-S223F Western Digital RE3 WD1002FBYS 1TB 7200 RPM SATA 3.0Gb/s Hard Drive Any comments or other recomendations are appreciated.... This is my first build without a floppy...:-). I have several around if I decide to slap one in. The Thermaltake V1 would probably not be my main choice of HS/Fan, but there isn't a lot of choices out there for this processor yet. My goal is to try and get to 3.5+Ghz if at all possible. I can go liquid cooling if need be, but would rather try for a quiet air cooled system. Good luck, I'm really looking forward to hearing how you go with your new system. Goes off to Google the Tt V1 Cheers, -- Shaun. |
#3
|
|||
|
|||
New Project_i7 920 Nehalem build
"Ed Medlin" wrote in message ... Got everything except the motherboard yesterday. I will be reusing my 2 EVGA Superclocked 8800 GTX cards in SLI. I don't think that will be a bottleneck yet. OS will be Vista Ultimate 64bit. Components: Antec Nine Hundred Black Steel ATX Mid Tower Computer Case CORSAIR XMS3 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Triple Channel Kit Desktop Memory Model TR3X6G1333C9 ASUS P6T Deluxe/OC Palm LGA 1366 Intel X58 ATX Intel Motherboard Intel Core i7 920 Nehalem 2.66GHz LGA 1366 130W Quad-Core Processor Model BX80601920 PC Power & Cooling S75QB 750W ATX12V / EPS12V SLI NVIDIA SLI Certified Active PFC Power Supply Thermaltake V1 Max-Performance CPU Cooler with Massive 110mm Blue LED Full-Range Variable Speed Fan Intel Core i7 Extreme Edition & Core i7 Ready LGA 1366 CL-P0401 2X SAMSUNG 22X DVD Burner Black SATA Model SH-S223F Western Digital RE3 WD1002FBYS 1TB 7200 RPM SATA 3.0Gb/s Hard Drive Any comments or other recomendations are appreciated.... This is my first build without a floppy...:-). I have several around if I decide to slap one in. The Thermaltake V1 would probably not be my main choice of HS/Fan, but there isn't a lot of choices out there for this processor yet. My goal is to try and get to 3.5+Ghz if at all possible. I can go liquid cooling if need be, but would rather try for a quiet air cooled system. I look forward to hearing your thoughts on the new build. I am planning a very similar build myself in the near future. Many are reporting successfully overclocking to 3.8-4 ghz on air with a decent cooler. I currently run the True Extreme Limited Edition with 2 ea 120mm fans in a push/pull config on my Q9450 and plan on probably using it on the I7 when I get it. Just will have to get a new backplate for it. I also have been reading reports a lot of folks are very pleased with the performance of that cpu on an X58 board. Hope to get the parts for my upgrade sometime early in the year. -- Don |
#4
|
|||
|
|||
New Project_i7 920 Nehalem build
"Don" wrote in message ... "Ed Medlin" wrote in message ... Got everything except the motherboard yesterday. I will be reusing my 2 EVGA Superclocked 8800 GTX cards in SLI. I don't think that will be a bottleneck yet. OS will be Vista Ultimate 64bit. Components: Antec Nine Hundred Black Steel ATX Mid Tower Computer Case CORSAIR XMS3 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Triple Channel Kit Desktop Memory Model TR3X6G1333C9 ASUS P6T Deluxe/OC Palm LGA 1366 Intel X58 ATX Intel Motherboard Intel Core i7 920 Nehalem 2.66GHz LGA 1366 130W Quad-Core Processor Model BX80601920 PC Power & Cooling S75QB 750W ATX12V / EPS12V SLI NVIDIA SLI Certified Active PFC Power Supply Thermaltake V1 Max-Performance CPU Cooler with Massive 110mm Blue LED Full-Range Variable Speed Fan Intel Core i7 Extreme Edition & Core i7 Ready LGA 1366 CL-P0401 2X SAMSUNG 22X DVD Burner Black SATA Model SH-S223F Western Digital RE3 WD1002FBYS 1TB 7200 RPM SATA 3.0Gb/s Hard Drive Any comments or other recomendations are appreciated.... This is my first build without a floppy...:-). I have several around if I decide to slap one in. The Thermaltake V1 would probably not be my main choice of HS/Fan, but there isn't a lot of choices out there for this processor yet. My goal is to try and get to 3.5+Ghz if at all possible. I can go liquid cooling if need be, but would rather try for a quiet air cooled system. I look forward to hearing your thoughts on the new build. I am planning a very similar build myself in the near future. Many are reporting successfully overclocking to 3.8-4 ghz on air with a decent cooler. I currently run the True Extreme Limited Edition with 2 ea 120mm fans in a push/pull config on my Q9450 and plan on probably using it on the I7 when I get it. Just will have to get a new backplate for it. The holes on the MB for mounting a HS through the board are much farther apart for the i7 so you would need some sort of adapter for the HS as well. The i7 processor is quite a bit larger than the C2Ds and quads probably due to the onboard memory controller. The Thermaltake V1 is a huge, flower shaped copper HS with a 120mm fan in the center of the fins that cool the hot end of the heatpipe system. The reason I don't really like it a lot is that it uses the plastic Intel push-pin design for mounting. It isn't quite as heavy as it you would think, but I am still not sure that the mounting system is hefty enough. I also have been reading reports a lot of folks are very pleased with the performance of that cpu on an X58 board. I hope it works out. I would have rather held out a few months rather than be the "goat", but we'll see how it all comes together today. I got the MB and last night got the memory and processor put into it and will get to guts of the build this afternoon. The Antec 900 case looks fantastic. I am not usually all that impressed by a case, but this one really looks nice and has a great looking cooling system. Ed |
#5
|
|||
|
|||
New Project_i7 920 Nehalem build
"~misfit~" wrote in message ... Somewhere on teh intarwebs "Ed Medlin" typed: Got everything except the motherboard yesterday. I will be reusing my 2 EVGA Superclocked 8800 GTX cards in SLI. I don't think that will be a bottleneck yet. OS will be Vista Ultimate 64bit. Components: Antec Nine Hundred Black Steel ATX Mid Tower Computer Case CORSAIR XMS3 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Triple Channel Kit Desktop Memory Model TR3X6G1333C9 ASUS P6T Deluxe/OC Palm LGA 1366 Intel X58 ATX Intel Motherboard Intel Core i7 920 Nehalem 2.66GHz LGA 1366 130W Quad-Core Processor Model BX80601920 PC Power & Cooling S75QB 750W ATX12V / EPS12V SLI NVIDIA SLI Certified Active PFC Power Supply Thermaltake V1 Max-Performance CPU Cooler with Massive 110mm Blue LED Full-Range Variable Speed Fan Intel Core i7 Extreme Edition & Core i7 Ready LGA 1366 CL-P0401 2X SAMSUNG 22X DVD Burner Black SATA Model SH-S223F Western Digital RE3 WD1002FBYS 1TB 7200 RPM SATA 3.0Gb/s Hard Drive Any comments or other recomendations are appreciated.... This is my first build without a floppy...:-). I have several around if I decide to slap one in. The Thermaltake V1 would probably not be my main choice of HS/Fan, but there isn't a lot of choices out there for this processor yet. My goal is to try and get to 3.5+Ghz if at all possible. I can go liquid cooling if need be, but would rather try for a quiet air cooled system. Good luck, I'm really looking forward to hearing how you go with your new system. Goes off to Google the Tt V1 Cheers, -- Shaun. It is a big brass monster with heat pipes and a huge flower shaped, finned cooling system with a 120mm fan in the middle...:-). My main issue is the Intel push-pin mounts and whether they will hold the thing. I have a backup plan using some insulating material and 4 short nuts and bolts if I don't like the way it secures.....:-). Ed |
#6
|
|||
|
|||
New Project_i7 920 Nehalem build
"Ed Medlin" wrote in message ... "Don" wrote in message ... "Ed Medlin" wrote in message ... Got everything except the motherboard yesterday. I will be reusing my 2 EVGA Superclocked 8800 GTX cards in SLI. I don't think that will be a bottleneck yet. OS will be Vista Ultimate 64bit. Components: Antec Nine Hundred Black Steel ATX Mid Tower Computer Case CORSAIR XMS3 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Triple Channel Kit Desktop Memory Model TR3X6G1333C9 ASUS P6T Deluxe/OC Palm LGA 1366 Intel X58 ATX Intel Motherboard Intel Core i7 920 Nehalem 2.66GHz LGA 1366 130W Quad-Core Processor Model BX80601920 PC Power & Cooling S75QB 750W ATX12V / EPS12V SLI NVIDIA SLI Certified Active PFC Power Supply Thermaltake V1 Max-Performance CPU Cooler with Massive 110mm Blue LED Full-Range Variable Speed Fan Intel Core i7 Extreme Edition & Core i7 Ready LGA 1366 CL-P0401 2X SAMSUNG 22X DVD Burner Black SATA Model SH-S223F Western Digital RE3 WD1002FBYS 1TB 7200 RPM SATA 3.0Gb/s Hard Drive Any comments or other recomendations are appreciated.... This is my first build without a floppy...:-). I have several around if I decide to slap one in. The Thermaltake V1 would probably not be my main choice of HS/Fan, but there isn't a lot of choices out there for this processor yet. My goal is to try and get to 3.5+Ghz if at all possible. I can go liquid cooling if need be, but would rather try for a quiet air cooled system. I look forward to hearing your thoughts on the new build. I am planning a very similar build myself in the near future. Many are reporting successfully overclocking to 3.8-4 ghz on air with a decent cooler. I currently run the True Extreme Limited Edition with 2 ea 120mm fans in a push/pull config on my Q9450 and plan on probably using it on the I7 when I get it. Just will have to get a new backplate for it. The holes on the MB for mounting a HS through the board are much farther apart for the i7 so you would need some sort of adapter for the HS as well. The i7 processor is quite a bit larger than the C2Ds and quads probably due to the onboard memory controller. The Thermaltake V1 is a huge, flower shaped copper HS with a 120mm fan in the center of the fins that cool the hot end of the heatpipe system. The reason I don't really like it a lot is that it uses the plastic Intel push-pin design for mounting. It isn't quite as heavy as it you would think, but I am still not sure that the mounting system is hefty enough. I also have been reading reports a lot of folks are very pleased with the performance of that cpu on an X58 board. I hope it works out. I would have rather held out a few months rather than be the "goat", but we'll see how it all comes together today. I got the MB and last night got the memory and processor put into it and will get to guts of the build this afternoon. The Antec 900 case looks fantastic. I am not usually all that impressed by a case, but this one really looks nice and has a great looking cooling system. Ed Yeah that is a pretty popular case. I have the CoolerMaster CM Evolution - Black - and I really like it . Plenty of room for lots of 120mm fans, and let me yell ya I use them! I know they sell an adapter for my heatsink, so hopefully it will come with whatever I need to get it mounted. I really like this heatsink and would like to stick with it. Have fun! -- Don |
#7
|
|||
|
|||
New Project_i7 920 Nehalem build
Got it all together and stable at 3.65Ghz right now. I am having some issues
with SLI'ing the two 8800GTX cards on this board. Got 20000 on 3DMark. Ed |
#8
|
|||
|
|||
New Project_i7 920 Nehalem build
Got a call for some "honey do's" before we get snowed on the rest of the
week so I cut that last post short....:-) There are some things to get used to with these i7s. The first and formost are the temps. Everything is different from what we have been used to with the Core processors as far as max temps go. Many of these are running very stable at better than 80C. I don't like it much, but it seems the new 65C is now about 85C. http://enthusiast.hardocp.com/articl...50aHVzaWFzdA== has some good info on overclocking the i7 920 and the temps to expect. I have mine now at 3.7Ghz at 2.9vcore and am seeing stressed temps in the upper 60sC-low 70sC and idle about 48C with the Thermaltake V1. I have a ton of air blowing across the HS/Fan with this Antec 900 case. It has a huge exhaust fan on top and a 180mm in the rear. Intake is from 2x 120mm front fans and another on the side panel. It is amazing that this stays so stable with the high temps. I haven't messed with the memory yet and have left it on Auto for the time being and will keep this CPU speed for awhile just to make sure it stays ok. If you have any questions or even some answers I will be glad to do what I can. I am still in the learning stages myself right now....:-). BTW....I am using 64bit Vista Ultimate with 6gigs of memory. Ed |
#9
|
|||
|
|||
New Project_i7 920 Nehalem build
Somewhere on teh intarwebs "Ed Medlin" typed:
"~misfit~" wrote in message ... Somewhere on teh intarwebs "Ed Medlin" typed: Got everything except the motherboard yesterday. I will be reusing my 2 EVGA Superclocked 8800 GTX cards in SLI. I don't think that will be a bottleneck yet. OS will be Vista Ultimate 64bit. Components: Antec Nine Hundred Black Steel ATX Mid Tower Computer Case CORSAIR XMS3 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Triple Channel Kit Desktop Memory Model TR3X6G1333C9 ASUS P6T Deluxe/OC Palm LGA 1366 Intel X58 ATX Intel Motherboard Intel Core i7 920 Nehalem 2.66GHz LGA 1366 130W Quad-Core Processor Model BX80601920 PC Power & Cooling S75QB 750W ATX12V / EPS12V SLI NVIDIA SLI Certified Active PFC Power Supply Thermaltake V1 Max-Performance CPU Cooler with Massive 110mm Blue LED Full-Range Variable Speed Fan Intel Core i7 Extreme Edition & Core i7 Ready LGA 1366 CL-P0401 2X SAMSUNG 22X DVD Burner Black SATA Model SH-S223F Western Digital RE3 WD1002FBYS 1TB 7200 RPM SATA 3.0Gb/s Hard Drive Any comments or other recomendations are appreciated.... This is my first build without a floppy...:-). I have several around if I decide to slap one in. The Thermaltake V1 would probably not be my main choice of HS/Fan, but there isn't a lot of choices out there for this processor yet. My goal is to try and get to 3.5+Ghz if at all possible. I can go liquid cooling if need be, but would rather try for a quiet air cooled system. Good luck, I'm really looking forward to hearing how you go with your new system. Goes off to Google the Tt V1 It is a big brass monster with heat pipes and a huge flower shaped, finned cooling system with a 120mm fan in the middle...:-). Yep, tracked down a site thats sells them. :-) My main issue is the Intel push-pin mounts and whether they will hold the thing. I have a backup plan using some insulating material and 4 short nuts and bolts if I don't like the way it secures.....:-). I wasn't happy with the push-pin mounting of the Tt MiniTyphoon on my C2D so bought a Thermalright bolt-thru kit, pulled the mobo out of the case and fitted it. I wouldn't want to have to do that again so, for me at least, I'd "build it once, build it right". g. Cheers, -- Shaun. |
#10
|
|||
|
|||
New Project_i7 920 Nehalem build
"~misfit~" wrote in message ... Somewhere on teh intarwebs "Ed Medlin" typed: "~misfit~" wrote in message ... Somewhere on teh intarwebs "Ed Medlin" typed: Got everything except the motherboard yesterday. I will be reusing my 2 EVGA Superclocked 8800 GTX cards in SLI. I don't think that will be a bottleneck yet. OS will be Vista Ultimate 64bit. Components: Antec Nine Hundred Black Steel ATX Mid Tower Computer Case CORSAIR XMS3 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Triple Channel Kit Desktop Memory Model TR3X6G1333C9 ASUS P6T Deluxe/OC Palm LGA 1366 Intel X58 ATX Intel Motherboard Intel Core i7 920 Nehalem 2.66GHz LGA 1366 130W Quad-Core Processor Model BX80601920 PC Power & Cooling S75QB 750W ATX12V / EPS12V SLI NVIDIA SLI Certified Active PFC Power Supply Thermaltake V1 Max-Performance CPU Cooler with Massive 110mm Blue LED Full-Range Variable Speed Fan Intel Core i7 Extreme Edition & Core i7 Ready LGA 1366 CL-P0401 2X SAMSUNG 22X DVD Burner Black SATA Model SH-S223F Western Digital RE3 WD1002FBYS 1TB 7200 RPM SATA 3.0Gb/s Hard Drive Any comments or other recomendations are appreciated.... This is my first build without a floppy...:-). I have several around if I decide to slap one in. The Thermaltake V1 would probably not be my main choice of HS/Fan, but there isn't a lot of choices out there for this processor yet. My goal is to try and get to 3.5+Ghz if at all possible. I can go liquid cooling if need be, but would rather try for a quiet air cooled system. Good luck, I'm really looking forward to hearing how you go with your new system. Goes off to Google the Tt V1 It is a big brass monster with heat pipes and a huge flower shaped, finned cooling system with a 120mm fan in the middle...:-). Yep, tracked down a site thats sells them. :-) My main issue is the Intel push-pin mounts and whether they will hold the thing. I have a backup plan using some insulating material and 4 short nuts and bolts if I don't like the way it secures.....:-). I wasn't happy with the push-pin mounting of the Tt MiniTyphoon on my C2D so bought a Thermalright bolt-thru kit, pulled the mobo out of the case and fitted it. I wouldn't want to have to do that again so, for me at least, I'd "build it once, build it right". g. Cheers, -- Shaun. Yea, I agree Shaun. Right now I have found "0" bolt-thru kits for the 1366 socket. This one seems to be doing ok and right there with any of the S 1366 coolers. It is just 3 degs or so away from H2O as compared to the HardOCP videos on overclocking the 920. Actually, my temps are lower than his H2O temps since I am only running at 2.9V vcore for 3.7Ghz and he was at 3.5V IIRC at 3.8Ghz. I would like to see the stock Intel fan that they put on the Extreme, it is supposed to be a lot better than the 920 one. Just for grins I ran the WEI in Vista and this system is 5.9 across the board. I need to install Sandra or something to do some memory and other tests just to compare with the Q6600 system. SLI is ok now with the latest drivers. I am at 3.7Ghz still and very stable. With all the bad weather outside I will have some time to mess around a bit today and get some software installed. I just have the fully updated Vista and a few testing programs on here now. I am running Vista Ultimate 64 with ALL the bells and whistles turned on, even Aero. http://service.futuremark.com/compare?3dm06=9235721 is my score on 3dmark 06 after updating Vista and turning on Aero and everything. Quite an improvement over the E6600 and Q6600 scores with everything else equal except for XP Pro 32 with the other processors. Ed |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Nehalem also has a TLB bug | Yousuf Khan | General | 9 | December 24th 08 12:02 PM |
Nehalem also has a TLB bug | Yousuf Khan | Intel | 13 | December 24th 08 12:02 PM |
Intel Nehalem vs Penryn, Should I wait? | Teknowbabble | Homebuilt PC's | 3 | June 10th 08 10:20 PM |
Itenium merged with x86 in nehalem? | Bill Davidsen | Intel | 3 | April 6th 07 09:51 PM |
Intel might revive Hyperthreading with Nehalem | lyon_wonder | General | 23 | December 1st 06 06:16 PM |