If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
GA-8KNXP vs P4P800 Deluxe.....
Hi all...
These are the 2 motherboards I'm considering for a new system. The Gigabyte is A$90 more than the Asus. What are your thoughts on these boards? Specifically, is the Gigabyte worth the extra $$$?? Stupot |
#2
|
|||
|
|||
The difference?
8KNXP is Canterwood - Intel 875 chipset, the P4P800 is Intel 865. The former has gigabit ethernet + ECC RAM capabilities. The 8KNXP has also the ITE (Gigaraid) controller. In terms of performance your would never notice the difference. The only issues there may be for you are your needs to for extras on the Gigabyte board. I know resellers / assemblers who only build using the 875 chipset on request since there is so little benefit to most people in the extras. IE they use the P4P800 in preference. That is the unbiased report. The biased report would be: get the asus. The choice then becomes if you get the P4C800 or the P4P800 for exactly the same reasons. The biased report is based from experience: the asus boards are better. The big let down for the GB boards is the quality of the bios and the length of time it takes them to resolve issues. - Tim "Stuart Chapman" wrote in message ... Hi all... These are the 2 motherboards I'm considering for a new system. The Gigabyte is A$90 more than the Asus. What are your thoughts on these boards? Specifically, is the Gigabyte worth the extra $$$?? Stupot |
#3
|
|||
|
|||
These are the 2 motherboards I'm considering for a new system.
The Gigabyte is A$90 more than the Asus. What are your thoughts on these boards? Specifically, is the Gigabyte worth the extra $$$?? I'm the owner of an 8KNXP. I really like the board's features (especially the IDE RAID), and that was my primary motivation for buying it. Unfortunately, my first 8KNXP randomly died after ~8 months of otherwise perfect use. I received a replacement (RMA) board (another 8KNXP v1) in about ~2 weeks. The replacement, like the original, feels fast, and generally runs well. (There doesn't appear to be any major sign of impending doom.) I would, however, point out a few of the issues that I've noticed: 1) The PC speaker beeps randomly, despite the fact that the fan and temperature fail warnings are turned off, and temperatures are easily within spec. Solution: I had to unplug the PC speaker. (Gigabyte tech support claimed to have never heard of this problem before. No pun intended. 2) The Northbridge fan tends to be quite loud. It often "grinds" with a horrific "death wail" on start-up. The noise does go away after a while, but I wouldn't be surprised if the fan one day stops spinning. Why the 8KNXP comes with a NB fan when most of the other major vendors use passive cooling is beyond me. 3) There have been a number of discussions about various memory incompatibilities with the 8KNXP (and especially older BIOS releases). I must admit that I've never had any problems -- I run a dual-channel, 1GB OCZ PC3200 EL RAM setup with 2-6-3-2 timing, and everything's great. Supposedly, the 8KNXP version 2 board (which is probably what you would receive if you bought one new) has cleared up a number of these problems. But, like I said, I've never had any problems in this regard. 4) The "spontaneous" failure of my first board doesn't seem to be a one-time thing: there have been a number of posts in this newsgroup from people experiencing similar difficulties. (There was no evidence of failure -- no leaky capacitors, no stopped fans ... The system simply would not boot or post.) That makes me very suspicious of the quality of the product, as a whole. (I mean, failure after the first few days or weeks -- sure, I can accept that. Failure during a bout of heavy CPU-intensive usage -- sure, I can accept that, too. But in my case, it was a random failure when the system was essentially idle for a few hours -- sheesh.) All told, my 8KNXP is my first -- and definitely last -- Gigabyte product for some time. My next board will be from Asus -- I've never had these kinds of problems (nor heard of any of my friends/colleagues having problems) with that brand. |
#4
|
|||
|
|||
Kris Vorwerk wrote:
These are the 2 motherboards I'm considering for a new system. The Gigabyte is A$90 more than the Asus. What are your thoughts on these boards? Specifically, is the Gigabyte worth the extra $$$?? I'm the owner of an 8KNXP. I really like the board's features (especially the IDE RAID), and that was my primary motivation for buying it. Unfortunately, my first 8KNXP randomly died after ~8 months of otherwise perfect use. I received a replacement (RMA) board (another 8KNXP v1) in about ~2 weeks. The replacement, like the original, feels fast, and generally runs well. (There doesn't appear to be any major sign of impending doom.) I would, however, point out a few of the issues that I've noticed: 1) The PC speaker beeps randomly, despite the fact that the fan and temperature fail warnings are turned off, and temperatures are easily within spec. Solution: I had to unplug the PC speaker. (Gigabyte tech support claimed to have never heard of this problem before. No pun intended. 2) The Northbridge fan tends to be quite loud. It often "grinds" with a horrific "death wail" on start-up. The noise does go away after a while, but I wouldn't be surprised if the fan one day stops spinning. Why the 8KNXP comes with a NB fan when most of the other major vendors use passive cooling is beyond me. 3) There have been a number of discussions about various memory incompatibilities with the 8KNXP (and especially older BIOS releases). I must admit that I've never had any problems -- I run a dual-channel, 1GB OCZ PC3200 EL RAM setup with 2-6-3-2 timing, and everything's great. Supposedly, the 8KNXP version 2 board (which is probably what you would receive if you bought one new) has cleared up a number of these problems. But, like I said, I've never had any problems in this regard. 4) The "spontaneous" failure of my first board doesn't seem to be a one-time thing: there have been a number of posts in this newsgroup from people experiencing similar difficulties. (There was no evidence of failure -- no leaky capacitors, no stopped fans ... The system simply would not boot or post.) That makes me very suspicious of the quality of the product, as a whole. (I mean, failure after the first few days or weeks -- sure, I can accept that. Failure during a bout of heavy CPU-intensive usage -- sure, I can accept that, too. But in my case, it was a random failure when the system was essentially idle for a few hours -- sheesh.) All told, my 8KNXP is my first -- and definitely last -- Gigabyte product for some time. My next board will be from Asus -- I've never had these kinds of problems (nor heard of any of my friends/colleagues having problems) with that brand. Everybody has his/her own story. I bought an Asus P4P800 Deluxe Rev.1.02 which died suddenly, silently, and unexpectedly after about two months. I sent it back to the dealer. As a 'bridge', I bought an Asus P4P800 Rev.2.0 which works fine till today (for about nine months now). From my dealer I got a replacement for the Deluxe board: a P4P800 Deluxe - unfortunately the same Rev.1.02 - after about six months of brave work, it died yesterday, silently, and unexpectedly. Today, I bought a GA-8IPE1000G... Roy |
#5
|
|||
|
|||
"Tim" wrote in message ... The difference? 8KNXP is Canterwood - Intel 875 chipset, the P4P800 is Intel 865. The former has gigabit ethernet + ECC RAM capabilities. The 8KNXP has also the ITE (Gigaraid) controller. In terms of performance your would never notice the difference. The only issues there may be for you are your needs to for extras on the Gigabyte board. I know resellers / assemblers who only build using the 875 chipset on request since there is so little benefit to most people in the extras. IE they use the P4P800 in preference. That is the unbiased report. The biased report would be: get the asus. The choice then becomes if you get the P4C800 or the P4P800 for exactly the same reasons. The biased report is based from experience: the asus boards are better. The big let down for the GB boards is the quality of the bios and the length of time it takes them to resolve issues. - Tim Thanks for the tips... I was leaning towards the ASUS, as I suspected the 875 chipset would have little noticeable effect on prformance. Interesting hearing about the reliability issues.... Stupot |
#6
|
|||
|
|||
"Tim" wrote in message ...
The difference? 8KNXP is Canterwood - Intel 875 chipset, the P4P800 is Intel 865. The former has gigabit ethernet + ECC RAM capabilities. The 8KNXP has also the ITE (Gigaraid) controller. In terms of performance your would never notice the difference. The only issues there may be for you are your needs to for extras on the Gigabyte board. I know resellers / assemblers who only build using the 875 chipset on request since there is so little benefit to most people in the extras. IE they use the P4P800 in preference. That is the unbiased report. The biased report would be: get the asus. The choice then becomes if you get the P4C800 or the P4P800 for exactly the same reasons. The biased report is based from experience: the asus boards are better. The big let down for the GB boards is the quality of the bios and the length of time it takes them to resolve issues. - Tim Over the past 2 years i have built 7 different Gigabyte systems all of which are still runing now with no issues, 2 were the KNXP version 1 and 2. Gigabyte boards are known for their high quality and features. Tech support from all the manufactures is just about non existant so your are on your own when building a system. DOUG |
#7
|
|||
|
|||
"Roy Coorne" wrote in message ... Kris Vorwerk wrote: These are the 2 motherboards I'm considering for a new system. The Gigabyte is A$90 more than the Asus. What are your thoughts on these boards? Specifically, is the Gigabyte worth the extra $$$?? I'm the owner of an 8KNXP. I really like the board's features (especially the IDE RAID), and that was my primary motivation for buying it. Unfortunately, my first 8KNXP randomly died after ~8 months of otherwise perfect use. I received a replacement (RMA) board (another 8KNXP v1) in about ~2 weeks. The replacement, like the original, feels fast, and generally runs well. (There doesn't appear to be any major sign of impending doom.) I would, however, point out a few of the issues that I've noticed: 1) The PC speaker beeps randomly, despite the fact that the fan and temperature fail warnings are turned off, and temperatures are easily within spec. Solution: I had to unplug the PC speaker. (Gigabyte tech support claimed to have never heard of this problem before. No pun intended. 2) The Northbridge fan tends to be quite loud. It often "grinds" with a horrific "death wail" on start-up. The noise does go away after a while, but I wouldn't be surprised if the fan one day stops spinning. Why the 8KNXP comes with a NB fan when most of the other major vendors use passive cooling is beyond me. 3) There have been a number of discussions about various memory incompatibilities with the 8KNXP (and especially older BIOS releases). I must admit that I've never had any problems -- I run a dual-channel, 1GB OCZ PC3200 EL RAM setup with 2-6-3-2 timing, and everything's great. Supposedly, the 8KNXP version 2 board (which is probably what you would receive if you bought one new) has cleared up a number of these problems. But, like I said, I've never had any problems in this regard. 4) The "spontaneous" failure of my first board doesn't seem to be a one-time thing: there have been a number of posts in this newsgroup from people experiencing similar difficulties. (There was no evidence of failure -- no leaky capacitors, no stopped fans ... The system simply would not boot or post.) That makes me very suspicious of the quality of the product, as a whole. (I mean, failure after the first few days or weeks -- sure, I can accept that. Failure during a bout of heavy CPU-intensive usage -- sure, I can accept that, too. But in my case, it was a random failure when the system was essentially idle for a few hours -- sheesh.) All told, my 8KNXP is my first -- and definitely last -- Gigabyte product for some time. My next board will be from Asus -- I've never had these kinds of problems (nor heard of any of my friends/colleagues having problems) with that brand. Everybody has his/her own story. I bought an Asus P4P800 Deluxe Rev.1.02 which died suddenly, silently, and unexpectedly after about two months. I sent it back to the dealer. As a 'bridge', I bought an Asus P4P800 Rev.2.0 which works fine till today (for about nine months now). From my dealer I got a replacement for the Deluxe board: a P4P800 Deluxe - unfortunately the same Rev.1.02 - after about six months of brave work, it died yesterday, silently, and unexpectedly. Today, I bought a GA-8IPE1000G... Roy I've had my 8KNXP since July 03 and haven't had a single hiccup. It has 2 hdd (SATA) and 3 optical drives hanging off it (DVD-R, DVD-ROM, CD-R/RW) and 1 gig of ram to make life interesting and hasn't put a foot wrong ever. I couldn't imagine myself without this system, ever reliable. I thought you need to hear this as Kris didn't have a good experience and went to great lengths to tell you so. I have the system running all weekend and many hours every weeknight and the fans don't sound any louder now than 11 months ago. I have a Rev. 1. board, still running original drivers, haven't updated anything other than XP and sounding like a broken record, it runs as well as I could hope for. Well worth the money I paid for it back then. Phil. |
#8
|
|||
|
|||
Same here, I have a rev 2 board. And to boot, I just completed setting up
my first raid and had absolutely NO idea WTF I was doing and not only did it work, it was easy:-) She's clocked to 3.5(it's a 2.8 chip)with some cheap kingston ram(DDR)and some rather aggressive memory timing settings and the only time the screen goes blank is when I shut it off:-) I've had Asus, Abit, Asus, Soyo, Intel and now Gig....and imho, there's good and bad in all of them. After my little (time) experience, I stay away from Soyo. Don "Phillip" wrote in message ... "Roy Coorne" wrote in message ... Kris Vorwerk wrote: These are the 2 motherboards I'm considering for a new system. The Gigabyte is A$90 more than the Asus. What are your thoughts on these boards? Specifically, is the Gigabyte worth the extra $$$?? I'm the owner of an 8KNXP. I really like the board's features (especially the IDE RAID), and that was my primary motivation for buying it. Unfortunately, my first 8KNXP randomly died after ~8 months of otherwise perfect use. I received a replacement (RMA) board (another 8KNXP v1) in about ~2 weeks. The replacement, like the original, feels fast, and generally runs well. (There doesn't appear to be any major sign of impending doom.) I would, however, point out a few of the issues that I've noticed: 1) The PC speaker beeps randomly, despite the fact that the fan and temperature fail warnings are turned off, and temperatures are easily within spec. Solution: I had to unplug the PC speaker. (Gigabyte tech support claimed to have never heard of this problem before. No pun intended. 2) The Northbridge fan tends to be quite loud. It often "grinds" with a horrific "death wail" on start-up. The noise does go away after a while, but I wouldn't be surprised if the fan one day stops spinning. Why the 8KNXP comes with a NB fan when most of the other major vendors use passive cooling is beyond me. 3) There have been a number of discussions about various memory incompatibilities with the 8KNXP (and especially older BIOS releases). I must admit that I've never had any problems -- I run a dual-channel, 1GB OCZ PC3200 EL RAM setup with 2-6-3-2 timing, and everything's great. Supposedly, the 8KNXP version 2 board (which is probably what you would receive if you bought one new) has cleared up a number of these problems. But, like I said, I've never had any problems in this regard. 4) The "spontaneous" failure of my first board doesn't seem to be a one-time thing: there have been a number of posts in this newsgroup from people experiencing similar difficulties. (There was no evidence of failure -- no leaky capacitors, no stopped fans ... The system simply would not boot or post.) That makes me very suspicious of the quality of the product, as a whole. (I mean, failure after the first few days or weeks -- sure, I can accept that. Failure during a bout of heavy CPU-intensive usage -- sure, I can accept that, too. But in my case, it was a random failure when the system was essentially idle for a few hours -- sheesh.) All told, my 8KNXP is my first -- and definitely last -- Gigabyte product for some time. My next board will be from Asus -- I've never had these kinds of problems (nor heard of any of my friends/colleagues having problems) with that brand. Everybody has his/her own story. I bought an Asus P4P800 Deluxe Rev.1.02 which died suddenly, silently, and unexpectedly after about two months. I sent it back to the dealer. As a 'bridge', I bought an Asus P4P800 Rev.2.0 which works fine till today (for about nine months now). From my dealer I got a replacement for the Deluxe board: a P4P800 Deluxe - unfortunately the same Rev.1.02 - after about six months of brave work, it died yesterday, silently, and unexpectedly. Today, I bought a GA-8IPE1000G... Roy I've had my 8KNXP since July 03 and haven't had a single hiccup. It has 2 hdd (SATA) and 3 optical drives hanging off it (DVD-R, DVD-ROM, CD-R/RW) and 1 gig of ram to make life interesting and hasn't put a foot wrong ever. I couldn't imagine myself without this system, ever reliable. I thought you need to hear this as Kris didn't have a good experience and went to great lengths to tell you so. I have the system running all weekend and many hours every weeknight and the fans don't sound any louder now than 11 months ago. I have a Rev. 1. board, still running original drivers, haven't updated anything other than XP and sounding like a broken record, it runs as well as I could hope for. Well worth the money I paid for it back then. Phil. |
#9
|
|||
|
|||
"Tim" wrote in message ... That is the unbiased report. The biased report would be: get the asus. The choice then becomes if you get the P4C800 or the P4P800 for exactly the same reasons. The biased report is based from experience: the asus boards are better. The big let down for the GB boards is the quality of the bios and the length of time it takes them to resolve issues. I must disagree with some of your points with respect given to your experiences. First, I selected the 8KNXP Rev. 1 one year ago almost to the day, and it is not only still running but has only crashed in XP Pro once, this considering the fact that it is used in a home-based business that requires it to be powered-up 18 hours per day, seven days per week, and in actual use much of that time. This inauspicious occasion occurred while I was attempting to position the bios settings for XP to accept the ICH5R SATA controller, previously disabled, but that situation was quickly corrected. As for Asus vs. GB and bios issues, if I had to pick one board at this time it would be the GB. I installed a P4C800 in a friend's computer, mostly because of price, and quickly ran into problem with its AMI bios that would arbitrarily rearrange the boot-drive sequence without human input when detaching IDE drives connected intermittently through a Mobil Rack. It caused so much trouble that I had to install a PCI IDE controller to circumvent the main bios, wresting control of the IDE drives away from the bios. This was not an isolated issue, as when I inquired on an Asus newsgroup I received lots of commiseration from others who had gone through the same problems. I'll take the Award bios any day, and I've never had trouble with f5, f6, or f9 on this Rev 1 board--the only versions I've used to date. This person plus another friend who also owns a P4C800 are both happy with their boards, even though one experienced a fatal failure requiring a replacement, but if I had to build another system for myself today it'd be a Rev 2 8KNXP. I have reason to believe it is better than the Rev 1, but if it is only as good, that would be good enough. |
#10
|
|||
|
|||
That is the unbiased report. The biased report would be: get the asus. The choice then becomes if you get the P4C800 or the P4P800 for exactly the same reasons. The biased report is based from experience: the asus boards are better. The big let down for the GB boards is the quality of the bios and the length of time it takes them to resolve issues. I must disagree with some of your points with respect given to your experiences. First, I selected the 8KNXP Rev. 1 one year ago almost to the day, and it is not only still running but has only crashed in XP Pro once, this considering the fact that it is used in a home-based business that requires it to be powered-up 18 hours per day, seven days per week, and in actual use much of that time. This inauspicious occasion occurred while I was attempting to position the bios settings for XP to accept the ICH5R SATA controller, previously disabled, but that situation was quickly corrected. As for Asus vs. GB and bios issues, if I had to pick one board at this time it would be the GB. I installed a P4C800 in a friend's computer, mostly because of price, and quickly ran into problem with its AMI bios that would arbitrarily rearrange the boot-drive sequence without human input when detaching IDE drives connected intermittently through a Mobil Rack. It caused so much trouble that I had to install a PCI IDE controller to circumvent the main bios, wresting control of the IDE drives away from the bios. This was not an isolated issue, as when I inquired on an Asus newsgroup I received lots of commiseration from others who had gone through the same problems. I'll take the Award bios any day, and I've never had trouble with f5, f6, or f9 on this Rev 1 board--the only versions I've used to date. This person plus another friend who also owns a P4C800 are both happy with their boards, even though one experienced a fatal failure requiring a replacement, but if I had to build another system for myself today it'd be a Rev 2 8KNXP. I have reason to believe it is better than the Rev 1, but if it is only as good, that would be good enough. Not only is the Gigabyte bios better than the Asus,it has 2 of them. The Asus bios is what kept me from buying one. I built a revision 1 KNXP for my nephew that he uses for video editing a year ago and it has been solid a a rock,i have the revision 2 that has been running 24 hours a day for over a year. DOUG |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Latest P4P800 Deluxe USB 2.0 W2K driver? | Daniel | Asus Motherboards | 4 | May 8th 04 12:11 AM |
P4P800 DeLuxe, WinXP and Hyper Threading | Fabio De Robertis | Asus Motherboards | 7 | January 27th 04 11:00 PM |
Memory for the P4P800 Deluxe | Linux Lover | Asus Motherboards | 10 | November 18th 03 01:45 AM |
P4P800 Deluxe - LAN problem | Mike | Asus Motherboards | 5 | July 29th 03 03:29 PM |
P4P800 Deluxe and blue screen during startup | mafiaboy | Asus Motherboards | 3 | July 18th 03 02:39 PM |