A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » System Manufacturers & Vendors » Compaq Computers
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

5108US - Need setup disks/bios how to/cpu upgrades for



 
 
Thread Tools Display Modes
  #1  
Old June 25th 04, 09:05 PM
toddb
external usenet poster
 
Posts: n/a
Default 5108US - Need setup disks/bios how to/cpu upgrades for

A few questions

any one know how to get into the bios setup for this pc?

where can I down load any setup disks/drivers etc?

anyone replaced the 1.2g processor with a faster one?

This came with pc 100 memory, 100 mhz fsb, any one able to run it faster
say 133 mhz fsb using pc133 memory?


thanks

Toddb (at) toddbailey (dot) Net
yes thats my email address and web site,
with a little editing needed



  #2  
Old June 25th 04, 10:11 PM
toddb
external usenet poster
 
Posts: n/a
Default

Update

f10 is the bios setup key,
I also found the jumper to go from 100 to 133 mhz, unfortunantly, the
system doesn't even run post on the 133 setting, regardless of memory
type. Oh well, not exactly a over-clockers dream system here.

  #3  
Old June 25th 04, 11:09 PM
HH
external usenet poster
 
Posts: n/a
Default

The FAQ answers most of your questions.
HH

"toddb" toddb@toddbailey(dot)net wrote in message
lkaboutcomputing.com...
A few questions

any one know how to get into the bios setup for this pc?

where can I down load any setup disks/drivers etc?

anyone replaced the 1.2g processor with a faster one?

This came with pc 100 memory, 100 mhz fsb, any one able to run it faster
say 133 mhz fsb using pc133 memory?


thanks

Toddb (at) toddbailey (dot) Net
yes thats my email address and web site,
with a little editing needed






  #4  
Old June 26th 04, 08:19 AM
OrgasmicTweeter
external usenet poster
 
Posts: n/a
Default

From what I gather the 5108US is a Slot 1, 200mhz FSB, VIA chipset. It is
made by F.I.C.. Its Non-OEM counterpart is the FIC-AZ31.
You shouldn't have any problems overclocking this board if you use the
proper RAM. Sorry, but PC100 or 133 ram won't cut it on this board..
Hope this Helps.


Best to All.....
TheGarbageGuy


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
MMC 9.0 "upgrade" Alan Olson Ati Videocards 18 April 27th 04 10:17 PM
Newbie purchasing A7N8X setup Chris R Asus Motherboards 7 November 6th 03 02:21 PM


All times are GMT +1. The time now is 12:56 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.