A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Processors » Overclocking AMD Processors
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Prime 95 FATAL ERROR: Final result was 996ED4BD, expected: AE3D2F94



 
 
Thread Tools Display Modes
  #1  
Old March 12th 04, 04:52 AM
Patrick Tite
external usenet poster
 
Posts: n/a
Default Prime 95 FATAL ERROR: Final result was 996ED4BD, expected: AE3D2F94

Got this error approximatley 1 hour into running Prime95. Does anyone have
any suggestons as to what it is caused by?

system specs are as follows;
CPU(s)
Number of CPUs 1

Code Name Barton
Specification AMD Athlon(TM) XP 3200+
Family / Model / Stepping 6 A 0
Extended Family / Model 7 A
Core Stepping
Technology 0.13 µ
Supported Instructions Sets MMX, Extended MMX, 3DNow!, Extended
3DNow!, SSE
CPU Clock Speed 2200.0 MHz
Clock multiplier x 11.0
Front Side Bus Frequency 200.0 MHz
Bus Speed 400.0 MHz
L1 Data Cache 64 KBytes, 2-way set associative, 64 Bytes line
size
L1 Instruction Cache 64 KBytes, 2-way set associative, 64 Bytes
line size
L2 Cache 512 KBytes, 16-way set associative, 64 Bytes line size
L2 Speed 2200.0 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 64 bits



Mainboard and chipset
Motherboard manufacturer ASUSTeK Computer INC.
Motherboard model A7V600, REV 1.xx
BIOS vendor Award Software, Inc.
BIOS revision ASUS A7V600 ACPI BIOS Revision 1005
BIOS release date 08/01/2003
Chipset VIA KT600 rev. 80
Southbridge VIA VT8237 rev. 0
Sensor chip FFFF

AGP Status enabled, rev. 3.5
AGP Data Transfert Rate 4x
AGP Side Band Addressing supported, not enabled
AGP Aperture Size 128 MBytes



Memory
DRAM Type DDR-SDRAM
DRAM Size 1024 MBytes
DRAM Frequency 200.0 MHz
FSBRAM 1:1
DRAM Interleave 4-way
CAS# Latency 2.5 clocks
RAS# to CAS# 3 clocks
RAS# Precharge 3 clocks
Cycle Time (TRAS) 8 clocks
# of memory modules 2
Module 0 DDR-SDRAM PC3200 - 512 MBytes
Module 1 DDR-SDRAM PC3200 - 512 MBytes



Software
Windows version Microsoft Windows XP Workstation Service Pack 1
(Build 2600)



  #2  
Old March 12th 04, 05:29 AM
Larry Gagnon
external usenet poster
 
Posts: n/a
Default

On Thu, 11 Mar 2004 22:52:39 -0500
"Patrick Tite" wrote:

Got this error approximatley 1 hour into running Prime95. Does anyone have
any suggestons as to what it is caused by?


I had a similar error - upping the Vcore very slightly solved my problem.
Increment your Vcore in steps of about 0.25V, trying to stay below 1.75v.
This may not necessarily be a solution for you, but Prime95 IS telling you
your computer is unstable, so give it a try.
  #3  
Old March 12th 04, 11:59 AM
HSV Guy
external usenet poster
 
Posts: n/a
Default

Also. Try putting the CAS for the memory timmings down to 2.5.
as well as upping the Vcore

"Patrick Tite" wrote in message
.. .
Got this error approximatley 1 hour into running Prime95. Does anyone have
any suggestons as to what it is caused by?

system specs are as follows;
CPU(s)
Number of CPUs 1

Code Name Barton
Specification AMD Athlon(TM) XP 3200+
Family / Model / Stepping 6 A 0
Extended Family / Model 7 A
Core Stepping
Technology 0.13 µ
Supported Instructions Sets MMX, Extended MMX, 3DNow!,

Extended
3DNow!, SSE
CPU Clock Speed 2200.0 MHz
Clock multiplier x 11.0
Front Side Bus Frequency 200.0 MHz
Bus Speed 400.0 MHz
L1 Data Cache 64 KBytes, 2-way set associative, 64 Bytes line
size
L1 Instruction Cache 64 KBytes, 2-way set associative, 64

Bytes
line size
L2 Cache 512 KBytes, 16-way set associative, 64 Bytes line

size
L2 Speed 2200.0 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 64 bits



Mainboard and chipset
Motherboard manufacturer ASUSTeK Computer INC.
Motherboard model A7V600, REV 1.xx
BIOS vendor Award Software, Inc.
BIOS revision ASUS A7V600 ACPI BIOS Revision 1005
BIOS release date 08/01/2003
Chipset VIA KT600 rev. 80
Southbridge VIA VT8237 rev. 0
Sensor chip FFFF

AGP Status enabled, rev. 3.5
AGP Data Transfert Rate 4x
AGP Side Band Addressing supported, not enabled
AGP Aperture Size 128 MBytes



Memory
DRAM Type DDR-SDRAM
DRAM Size 1024 MBytes
DRAM Frequency 200.0 MHz
FSBRAM 1:1
DRAM Interleave 4-way
CAS# Latency 2.5 clocks
RAS# to CAS# 3 clocks
RAS# Precharge 3 clocks
Cycle Time (TRAS) 8 clocks
# of memory modules 2
Module 0 DDR-SDRAM PC3200 - 512 MBytes
Module 1 DDR-SDRAM PC3200 - 512 MBytes



Software
Windows version Microsoft Windows XP Workstation Service Pack

1
(Build 2600)





 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 09:29 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.