A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » System Manufacturers & Vendors » Dell Computers
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Inspiron 6000 PCI Device Unknown In Device Manager...Help!



 
 
Thread Tools Display Modes
  #1  
Old July 16th 05, 11:14 PM
Tragik Magik
external usenet poster
 
Posts: n/a
Default Inspiron 6000 PCI Device Unknown In Device Manager...Help!

Got a Ispiron 6000 with XP Media version XP. However I wanted XP pro.
No rpoblem just installed my old copy of XP pro from the old laptop
which now runs Knoppix. Here is the problem though, saved the drivers
from the hard drive before fdisking the drive, but there is a driver
missing for some PCI device. Anybody have an idea what it is? I have
every other device working fine except for this "mystery device" which
I don't know where to get a driver for.

Any help appreciated.

PS yes I did go to the driver download section at dell and got every
driver for this model....no luck. Dell support useless too.

  #2  
Old July 16th 05, 11:38 PM
Tom Scales
external usenet poster
 
Posts: n/a
Default


"Tragik Magik" wrote in message
...
Got a Ispiron 6000 with XP Media version XP. However I wanted XP pro.
No rpoblem just installed my old copy of XP pro from the old laptop
which now runs Knoppix. Here is the problem though, saved the drivers
from the hard drive before fdisking the drive, but there is a driver
missing for some PCI device. Anybody have an idea what it is? I have
every other device working fine except for this "mystery device" which
I don't know where to get a driver for.

Any help appreciated.

PS yes I did go to the driver download section at dell and got every
driver for this model....no luck. Dell support useless too.


Did you install the Chipset drivers first? Dell won't support XP Pro, of
course, since you installed an illegal copy on your machine. Your XP Pro
license is tied to the laptop on which it was purchased, regardless of what
is installed on it now. Actually, while true, that's not why they don't
support you. They just support the OS you bought from them.

By the way, why do you want Pro? MCE is based on Pro.

Tom


  #3  
Old July 16th 05, 11:41 PM
Fixer
external usenet poster
 
Posts: n/a
Default

also makesure you install the chipset drivers
"Tragik Magik" wrote in message
...
Got a Ispiron 6000 with XP Media version XP. However I wanted XP pro.
No rpoblem just installed my old copy of XP pro from the old laptop
which now runs Knoppix. Here is the problem though, saved the drivers
from the hard drive before fdisking the drive, but there is a driver
missing for some PCI device. Anybody have an idea what it is? I have
every other device working fine except for this "mystery device" which
I don't know where to get a driver for.

Any help appreciated.

PS yes I did go to the driver download section at dell and got every
driver for this model....no luck. Dell support useless too.



  #4  
Old July 17th 05, 12:10 AM
Tragik Magik
external usenet poster
 
Posts: n/a
Default

Thanks for the info on the chipset drivers "FIRST" will give that a
try. Also it is not an illgale copy of Windows XP Pro, as I bought a
new hard drive for the old laptop and was thereby allowed to buy an
OEM version of XP Pro. I do realize the bit about Dell not supporting
it, but obviously they should have drivers for ALL devices for this
model on ther web site. Hell, I didn't even get an OS disk with this
unit, have to create your own....cheap *******s. How I long for the
day when you bought a PC and it came with all the drivers on disks.

Thanks again.

Cheers

BTW don't need all the fluff with MCE, hence the XP Pro


On Sat, 16 Jul 2005 22:38:01 GMT, "Tom Scales"
wrote:


"Tragik Magik" wrote in message
.. .
Got a Ispiron 6000 with XP Media version XP. However I wanted XP pro.
No rpoblem just installed my old copy of XP pro from the old laptop
which now runs Knoppix. Here is the problem though, saved the drivers
from the hard drive before fdisking the drive, but there is a driver
missing for some PCI device. Anybody have an idea what it is? I have
every other device working fine except for this "mystery device" which
I don't know where to get a driver for.

Any help appreciated.

PS yes I did go to the driver download section at dell and got every
driver for this model....no luck. Dell support useless too.


Did you install the Chipset drivers first? Dell won't support XP Pro, of
course, since you installed an illegal copy on your machine. Your XP Pro
license is tied to the laptop on which it was purchased, regardless of what
is installed on it now. Actually, while true, that's not why they don't
support you. They just support the OS you bought from them.

By the way, why do you want Pro? MCE is based on Pro.

Tom


  #5  
Old July 17th 05, 12:51 AM
NuTCrAcKeR
external usenet poster
 
Posts: n/a
Default

Its probably your modem. Is is a Simple PCI Communication Controller ?


"Tragik Magik" wrote in message
...
Thanks for the info on the chipset drivers "FIRST" will give that a
try. Also it is not an illgale copy of Windows XP Pro, as I bought a
new hard drive for the old laptop and was thereby allowed to buy an
OEM version of XP Pro. I do realize the bit about Dell not supporting
it, but obviously they should have drivers for ALL devices for this
model on ther web site. Hell, I didn't even get an OS disk with this
unit, have to create your own....cheap *******s. How I long for the
day when you bought a PC and it came with all the drivers on disks.

Thanks again.

Cheers

BTW don't need all the fluff with MCE, hence the XP Pro


On Sat, 16 Jul 2005 22:38:01 GMT, "Tom Scales"
wrote:


"Tragik Magik" wrote in message
. ..
Got a Ispiron 6000 with XP Media version XP. However I wanted XP pro.
No rpoblem just installed my old copy of XP pro from the old laptop
which now runs Knoppix. Here is the problem though, saved the drivers
from the hard drive before fdisking the drive, but there is a driver
missing for some PCI device. Anybody have an idea what it is? I have
every other device working fine except for this "mystery device" which
I don't know where to get a driver for.

Any help appreciated.

PS yes I did go to the driver download section at dell and got every
driver for this model....no luck. Dell support useless too.


Did you install the Chipset drivers first? Dell won't support XP Pro, of
course, since you installed an illegal copy on your machine. Your XP Pro
license is tied to the laptop on which it was purchased, regardless of
what
is installed on it now. Actually, while true, that's not why they don't
support you. They just support the OS you bought from them.

By the way, why do you want Pro? MCE is based on Pro.

Tom




  #6  
Old July 17th 05, 03:27 AM
Tom Scales
external usenet poster
 
Posts: n/a
Default

There is an uninstall for the MCE "fluff". Sorry if I jumped to a
conclusion on XP Pro. So many people come here looking for support on
'borrowed' copies.

I've found that MCE is so closed to Pro and the MCE stuff is so unobstrusive
that it isn't worth the switch.

Also, the website should have everything. I've never found it not to.

Tom
"Tragik Magik" wrote in message
...
Thanks for the info on the chipset drivers "FIRST" will give that a
try. Also it is not an illgale copy of Windows XP Pro, as I bought a
new hard drive for the old laptop and was thereby allowed to buy an
OEM version of XP Pro. I do realize the bit about Dell not supporting
it, but obviously they should have drivers for ALL devices for this
model on ther web site. Hell, I didn't even get an OS disk with this
unit, have to create your own....cheap *******s. How I long for the
day when you bought a PC and it came with all the drivers on disks.

Thanks again.

Cheers

BTW don't need all the fluff with MCE, hence the XP Pro


On Sat, 16 Jul 2005 22:38:01 GMT, "Tom Scales"
wrote:


"Tragik Magik" wrote in message
. ..
Got a Ispiron 6000 with XP Media version XP. However I wanted XP pro.
No rpoblem just installed my old copy of XP pro from the old laptop
which now runs Knoppix. Here is the problem though, saved the drivers
from the hard drive before fdisking the drive, but there is a driver
missing for some PCI device. Anybody have an idea what it is? I have
every other device working fine except for this "mystery device" which
I don't know where to get a driver for.

Any help appreciated.

PS yes I did go to the driver download section at dell and got every
driver for this model....no luck. Dell support useless too.


Did you install the Chipset drivers first? Dell won't support XP Pro, of
course, since you installed an illegal copy on your machine. Your XP Pro
license is tied to the laptop on which it was purchased, regardless of
what
is installed on it now. Actually, while true, that's not why they don't
support you. They just support the OS you bought from them.

By the way, why do you want Pro? MCE is based on Pro.

Tom




  #7  
Old July 17th 05, 05:04 AM
Tragik Magik
external usenet poster
 
Posts: n/a
Default

No problems, and I found the solution....boy do I feel REALLY stupid.
As I say this is a new Laptop that I have not really had time to check
out. Low and behold it has a SD Card reader on the side...never saw
it....black blends in well with black under poor lighting conditions.
At any rate the reason there are no drivers for this on the site is
because they come with XP SP2!!! I refuse to install Service Crap 2,
really very useless. I run a router with a firewall, and zone alarm.
Both are far superior to SP2's so called firewall, and after that I
can't think of a reason to install SP2. At any rate, I hope that this
will help somebody as stupid as me in the future LOL

This is the file that you need

Ricoh SD Bus Host Adapter : System32\Drivers\sdbus.sys

Could not find it for free on the web, but my eyes are glazed
over...wasted a lot of time today.

Anybody with XP SP2 can send you the file and have it work

Thanks for the help, Cheers



On Sun, 17 Jul 2005 02:27:39 GMT, "Tom Scales"
wrote:

There is an uninstall for the MCE "fluff". Sorry if I jumped to a
conclusion on XP Pro. So many people come here looking for support on
'borrowed' copies.

I've found that MCE is so closed to Pro and the MCE stuff is so unobstrusive
that it isn't worth the switch.

Also, the website should have everything. I've never found it not to.

Tom
"Tragik Magik" wrote in message
.. .
Thanks for the info on the chipset drivers "FIRST" will give that a
try. Also it is not an illgale copy of Windows XP Pro, as I bought a
new hard drive for the old laptop and was thereby allowed to buy an
OEM version of XP Pro. I do realize the bit about Dell not supporting
it, but obviously they should have drivers for ALL devices for this
model on ther web site. Hell, I didn't even get an OS disk with this
unit, have to create your own....cheap *******s. How I long for the
day when you bought a PC and it came with all the drivers on disks.

Thanks again.

Cheers

BTW don't need all the fluff with MCE, hence the XP Pro


On Sat, 16 Jul 2005 22:38:01 GMT, "Tom Scales"
wrote:


"Tragik Magik" wrote in message
...
Got a Ispiron 6000 with XP Media version XP. However I wanted XP pro.
No rpoblem just installed my old copy of XP pro from the old laptop
which now runs Knoppix. Here is the problem though, saved the drivers
from the hard drive before fdisking the drive, but there is a driver
missing for some PCI device. Anybody have an idea what it is? I have
every other device working fine except for this "mystery device" which
I don't know where to get a driver for.

Any help appreciated.

PS yes I did go to the driver download section at dell and got every
driver for this model....no luck. Dell support useless too.


Did you install the Chipset drivers first? Dell won't support XP Pro, of
course, since you installed an illegal copy on your machine. Your XP Pro
license is tied to the laptop on which it was purchased, regardless of
what
is installed on it now. Actually, while true, that's not why they don't
support you. They just support the OS you bought from them.

By the way, why do you want Pro? MCE is based on Pro.

Tom




 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
usb: Unknown Device Alan Kerr Compaq Computers 2 January 20th 05 07:00 PM
New Radeon 9600 Pro - No Direct3D support? Scott Smith Ati Videocards 7 September 28th 04 04:50 PM
8100 and Device Manager Bill Dell Computers 10 April 20th 04 08:42 AM
Unknown device in Deskpro ENS/P800 Hans Compaq Computers 14 November 24th 03 07:54 PM
Help ID "Other Device" in Device Manager on Dell Dimension 8000 Tom Scales Dell Computers 0 June 24th 03 12:03 PM


All times are GMT +1. The time now is 03:39 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.