If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Cutting PS wires anyone?
Have any of you people ever thought about or actually cut away any of these useless wires that protrude from your power supplies that go unused because there are just so many? Are there any units that have just plug in cables like Thermaltake extra wire options? http://www.thermaltakeusa.com/Produc...C=1264&ID=1830 It's just to crowded in my latest project with a compact case. Even with a large gaming tower there just isn't enough room for all these extra wires. How about shorter SATA cables and fans that have plugs right at their cases instead of having to tie up so many wires all the time. Isn't about time someone made a case that has a built in harness or true modular components? |
#2
|
|||
|
|||
Cutting PS wires anyone?
Allen Drake ALDrake Spamex.com wrote:
Have any of you people ever thought about or actually cut away any of these useless wires that protrude from your power supplies that go unused because there are just so many? Cut and then solder to make shorter? No. Cut some of the unnecessary cables? Yes. But that should be done conservatively, if you must. Are there any units that have just plug in cables Yes, various brands include modular power supply cables. It's just to crowded in my latest project with a compact case. Even with a large gaming tower there just isn't enough room for all these extra wires. Hmm. To me, it's just the extra work of meticulously routing them so that they are not in the way. Good luck and have fun. -- How about shorter SATA cables and fans that have plugs right at their cases instead of having to tie up so many wires all the time. Isn't about time someone made a case that has a built in harness or true modular components? |
#3
|
|||
|
|||
Cutting PS wires anyone?
John Doe wrote:
Allen Drake ALDrake Spamex.com wrote: Have any of you people ever thought about or actually cut away any of these useless wires that protrude from your power supplies that go unused because there are just so many? Cut and then solder to make shorter? No. Cut some of the unnecessary cables? Yes. But that should be done conservatively, if you must. Are there any units that have just plug in cables Yes, various brands include modular power supply cables. It's just to crowded in my latest project with a compact case. Even with a large gaming tower there just isn't enough room for all these extra wires. Hmm. To me, it's just the extra work of meticulously routing them so that they are not in the way. Good luck and have fun. Picture of a modular power supply here. http://images.highspeedbackbone.net/...2-40500_01.jpg Paul |
#4
|
|||
|
|||
Cutting PS wires anyone?
On Nov 20, 6:40 am, Allen Drake wrote:
Have any of you people ever thought about or actually cut away any of these useless wires that protrude from your power supplies that go unused because there are just so many? Are there any units that have just plug in cables like Thermaltake extra wire options? http://www.thermaltakeusa.com/Produc...C=1264&ID=1830 It's just to crowded in my latest project with a compact case. Even with a large gaming tower there just isn't enough room for all these extra wires. How about shorter SATA cables and fans that have plugs right at their cases instead of having to tie up so many wires all the time. Isn't about time someone made a case that has a built in harness or true modular components? Nope. Conversely, though. . . Once wired two power supplies together. No harm done, but didn't power up when plugged in. |
#5
|
|||
|
|||
Cutting PS wires anyone?
Allen Drake wrote:
Are there any units that have just plug in cables like Thermaltake extra wire options? http://www.thermaltakeusa.com/Produc...C=1264&ID=1830 There are many PSUs, at higher cost, that come with pluggable cables rather than giving you a fixed harness. When searching on PSUs at an etailer, look for "modular". Example search at one etailer: http://www.newegg.com/Product/Produc...vancedSearch=1 It's just to crowded in my latest project with a compact case. Even with a large gaming tower there just isn't enough room for all these extra wires. I've purchased many PSUs with fixed wiring harness and always managed to find room but it depends if you are neat while using cable ties and route the wiring to get it out of the way, like behind the drive cage or alongside the mobo's front edge (using self-stick cable tie bases although some just have holes so you could pop rivet them in place) while also keeping it out of the airflow. http://www.conrad.de/medias/global/c...B.EPS_1000.jpg http://www.xtremevan.co.uk/images/sb2.jpg Many times you can shove some of the extra connector ends between the drives (so space them out in the cages instead of placing right next to each other) but don't shove much in between so the drives can cool off (another reason not to place them apart unless you want to add more fans and more noise). Loop the extra wiring and connector back on itself and use cable ties to keep a minimal footprint to let the drive get air flow and typically you don't need anything to keep the looped wiring there. How about shorter SATA cables and fans that have plugs right at their cases instead of having to tie up so many wires all the time. Isn't about time someone made a case that has a built in harness or true modular components? Modular PSUs have been around for a long time. But then routing the wire harness against the 2nd side panel (to which the mobo attaches) and behind the drive cage is a long-time solution, too, along with cable ties and cable ties mounting bases. |
#6
|
|||
|
|||
Cutting PS wires anyone?
On Sun, 20 Nov 2011 15:26:49 -0600, VanguardLH wrote:
Allen Drake wrote: Are there any units that have just plug in cables like Thermaltake extra wire options? http://www.thermaltakeusa.com/Produc...C=1264&ID=1830 There are many PSUs, at higher cost, that come with pluggable cables rather than giving you a fixed harness. When searching on PSUs at an etailer, look for "modular". Example search at one etailer: http://www.newegg.com/Product/Produc...vancedSearch=1 It's just to crowded in my latest project with a compact case. Even with a large gaming tower there just isn't enough room for all these extra wires. I've purchased many PSUs with fixed wiring harness and always managed to find room but it depends if you are neat while using cable ties and route the wiring to get it out of the way, like behind the drive cage or alongside the mobo's front edge (using self-stick cable tie bases although some just have holes so you could pop rivet them in place) while also keeping it out of the airflow. http://www.conrad.de/medias/global/c...B.EPS_1000.jpg http://www.xtremevan.co.uk/images/sb2.jpg Many times you can shove some of the extra connector ends between the drives (so space them out in the cages instead of placing right next to each other) but don't shove much in between so the drives can cool off (another reason not to place them apart unless you want to add more fans and more noise). Loop the extra wiring and connector back on itself and use cable ties to keep a minimal footprint to let the drive get air flow and typically you don't need anything to keep the looped wiring there. How about shorter SATA cables and fans that have plugs right at their cases instead of having to tie up so many wires all the time. Isn't about time someone made a case that has a built in harness or true modular components? Modular PSUs have been around for a long time. But then routing the wire harness against the 2nd side panel (to which the mobo attaches) and behind the drive cage is a long-time solution, too, along with cable ties and cable ties mounting bases. Excellent post. Thanks. I like the modular supplies and think I will order a few soon. I do think I will be making my own cables to get them exactly the right size. I've seen many go to lengths like cutting holes in cases. I have a new case that has little room to hide any PSU cables anywhere. Al. |
#7
|
|||
|
|||
Cutting PS wires anyone?
"Allen Drake" wrote in message news On Sun, 20 Nov 2011 15:26:49 -0600, VanguardLH wrote: Allen Drake wrote: Are there any units that have just plug in cables like Thermaltake extra wire options? http://www.thermaltakeusa.com/Produc...C=1264&ID=1830 There are many PSUs, at higher cost, that come with pluggable cables rather than giving you a fixed harness. When searching on PSUs at an etailer, look for "modular". Example search at one etailer: http://www.newegg.com/Product/Produc...vancedSearch=1 It's just to crowded in my latest project with a compact case. Even with a large gaming tower there just isn't enough room for all these extra wires. I've purchased many PSUs with fixed wiring harness and always managed to find room but it depends if you are neat while using cable ties and route the wiring to get it out of the way, like behind the drive cage or alongside the mobo's front edge (using self-stick cable tie bases although some just have holes so you could pop rivet them in place) while also keeping it out of the airflow. http://www.conrad.de/medias/global/c...B.EPS_1000.jpg http://www.xtremevan.co.uk/images/sb2.jpg Many times you can shove some of the extra connector ends between the drives (so space them out in the cages instead of placing right next to each other) but don't shove much in between so the drives can cool off (another reason not to place them apart unless you want to add more fans and more noise). Loop the extra wiring and connector back on itself and use cable ties to keep a minimal footprint to let the drive get air flow and typically you don't need anything to keep the looped wiring there. How about shorter SATA cables and fans that have plugs right at their cases instead of having to tie up so many wires all the time. Isn't about time someone made a case that has a built in harness or true modular components? Modular PSUs have been around for a long time. But then routing the wire harness against the 2nd side panel (to which the mobo attaches) and behind the drive cage is a long-time solution, too, along with cable ties and cable ties mounting bases. Excellent post. Thanks. I like the modular supplies and think I will order a few soon. I do think I will be making my own cables to get them exactly the right size. I've seen many go to lengths like cutting holes in cases. I have a new case that has little room to hide any PSU cables anywhere. Al. If you have the pin removal tools and a decent soldering iron (or new pins and a crimping tool), you can make the cables any length you need/want. Using a modular PSU would make it quite easy to do (albeit time consuming) since you could mount your PSU in place, then measure your cables individually without the others getting in the way. -- SC Tom |
#8
|
|||
|
|||
Cutting PS wires anyone?
On Sun, 20 Nov 2011 18:14:38 -0500, "SC Tom" wrote:
"Allen Drake" wrote in message news On Sun, 20 Nov 2011 15:26:49 -0600, VanguardLH wrote: Allen Drake wrote: Are there any units that have just plug in cables like Thermaltake extra wire options? http://www.thermaltakeusa.com/Produc...C=1264&ID=1830 There are many PSUs, at higher cost, that come with pluggable cables rather than giving you a fixed harness. When searching on PSUs at an etailer, look for "modular". Example search at one etailer: http://www.newegg.com/Product/Produc...vancedSearch=1 It's just to crowded in my latest project with a compact case. Even with a large gaming tower there just isn't enough room for all these extra wires. I've purchased many PSUs with fixed wiring harness and always managed to find room but it depends if you are neat while using cable ties and route the wiring to get it out of the way, like behind the drive cage or alongside the mobo's front edge (using self-stick cable tie bases although some just have holes so you could pop rivet them in place) while also keeping it out of the airflow. http://www.conrad.de/medias/global/c...B.EPS_1000.jpg http://www.xtremevan.co.uk/images/sb2.jpg Many times you can shove some of the extra connector ends between the drives (so space them out in the cages instead of placing right next to each other) but don't shove much in between so the drives can cool off (another reason not to place them apart unless you want to add more fans and more noise). Loop the extra wiring and connector back on itself and use cable ties to keep a minimal footprint to let the drive get air flow and typically you don't need anything to keep the looped wiring there. How about shorter SATA cables and fans that have plugs right at their cases instead of having to tie up so many wires all the time. Isn't about time someone made a case that has a built in harness or true modular components? Modular PSUs have been around for a long time. But then routing the wire harness against the 2nd side panel (to which the mobo attaches) and behind the drive cage is a long-time solution, too, along with cable ties and cable ties mounting bases. Excellent post. Thanks. I like the modular supplies and think I will order a few soon. I do think I will be making my own cables to get them exactly the right size. I've seen many go to lengths like cutting holes in cases. I have a new case that has little room to hide any PSU cables anywhere. Al. If you have the pin removal tools and a decent soldering iron (or new pins and a crimping tool), you can make the cables any length you need/want. Using a modular PSU would make it quite easy to do (albeit time consuming) since you could mount your PSU in place, then measure your cables individually without the others getting in the way. I thought of that. I do know someone that has all the tools for the job. Many times she has offered to bring them home from work. This time I think I will take her up on that. This is the first time I ever worked on such a small case and some of those beefy PSU have very large and long wires. |
#9
|
|||
|
|||
Cutting PS wires anyone?
"Allen Drake" wrote in message ... On Sun, 20 Nov 2011 18:14:38 -0500, "SC Tom" wrote: "Allen Drake" wrote in message news On Sun, 20 Nov 2011 15:26:49 -0600, VanguardLH wrote: Allen Drake wrote: Are there any units that have just plug in cables like Thermaltake extra wire options? http://www.thermaltakeusa.com/Produc...C=1264&ID=1830 There are many PSUs, at higher cost, that come with pluggable cables rather than giving you a fixed harness. When searching on PSUs at an etailer, look for "modular". Example search at one etailer: http://www.newegg.com/Product/Produc...vancedSearch=1 It's just to crowded in my latest project with a compact case. Even with a large gaming tower there just isn't enough room for all these extra wires. I've purchased many PSUs with fixed wiring harness and always managed to find room but it depends if you are neat while using cable ties and route the wiring to get it out of the way, like behind the drive cage or alongside the mobo's front edge (using self-stick cable tie bases although some just have holes so you could pop rivet them in place) while also keeping it out of the airflow. http://www.conrad.de/medias/global/c...B.EPS_1000.jpg http://www.xtremevan.co.uk/images/sb2.jpg Many times you can shove some of the extra connector ends between the drives (so space them out in the cages instead of placing right next to each other) but don't shove much in between so the drives can cool off (another reason not to place them apart unless you want to add more fans and more noise). Loop the extra wiring and connector back on itself and use cable ties to keep a minimal footprint to let the drive get air flow and typically you don't need anything to keep the looped wiring there. How about shorter SATA cables and fans that have plugs right at their cases instead of having to tie up so many wires all the time. Isn't about time someone made a case that has a built in harness or true modular components? Modular PSUs have been around for a long time. But then routing the wire harness against the 2nd side panel (to which the mobo attaches) and behind the drive cage is a long-time solution, too, along with cable ties and cable ties mounting bases. Excellent post. Thanks. I like the modular supplies and think I will order a few soon. I do think I will be making my own cables to get them exactly the right size. I've seen many go to lengths like cutting holes in cases. I have a new case that has little room to hide any PSU cables anywhere. Al. If you have the pin removal tools and a decent soldering iron (or new pins and a crimping tool), you can make the cables any length you need/want. Using a modular PSU would make it quite easy to do (albeit time consuming) since you could mount your PSU in place, then measure your cables individually without the others getting in the way. I thought of that. I do know someone that has all the tools for the job. Many times she has offered to bring them home from work. This time I think I will take her up on that. This is the first time I ever worked on such a small case and some of those beefy PSU have very large and long wires. Long you can take care of, but large, not so much :-) You certainly don't want to try to use smaller wiring. Good luck and take your time. Certainly don't want any crossed wires here. -- SC Tom |
#10
|
|||
|
|||
Cutting PS wires anyone?
On Mon, 21 Nov 2011 06:58:04 -0500, "SC Tom" wrote:
"Allen Drake" wrote in message ... On Sun, 20 Nov 2011 18:14:38 -0500, "SC Tom" wrote: "Allen Drake" wrote in message news On Sun, 20 Nov 2011 15:26:49 -0600, VanguardLH wrote: Allen Drake wrote: Are there any units that have just plug in cables like Thermaltake extra wire options? http://www.thermaltakeusa.com/Produc...C=1264&ID=1830 There are many PSUs, at higher cost, that come with pluggable cables rather than giving you a fixed harness. When searching on PSUs at an etailer, look for "modular". Example search at one etailer: http://www.newegg.com/Product/Produc...vancedSearch=1 It's just to crowded in my latest project with a compact case. Even with a large gaming tower there just isn't enough room for all these extra wires. I've purchased many PSUs with fixed wiring harness and always managed to find room but it depends if you are neat while using cable ties and route the wiring to get it out of the way, like behind the drive cage or alongside the mobo's front edge (using self-stick cable tie bases although some just have holes so you could pop rivet them in place) while also keeping it out of the airflow. http://www.conrad.de/medias/global/c...B.EPS_1000.jpg http://www.xtremevan.co.uk/images/sb2.jpg Many times you can shove some of the extra connector ends between the drives (so space them out in the cages instead of placing right next to each other) but don't shove much in between so the drives can cool off (another reason not to place them apart unless you want to add more fans and more noise). Loop the extra wiring and connector back on itself and use cable ties to keep a minimal footprint to let the drive get air flow and typically you don't need anything to keep the looped wiring there. How about shorter SATA cables and fans that have plugs right at their cases instead of having to tie up so many wires all the time. Isn't about time someone made a case that has a built in harness or true modular components? Modular PSUs have been around for a long time. But then routing the wire harness against the 2nd side panel (to which the mobo attaches) and behind the drive cage is a long-time solution, too, along with cable ties and cable ties mounting bases. Excellent post. Thanks. I like the modular supplies and think I will order a few soon. I do think I will be making my own cables to get them exactly the right size. I've seen many go to lengths like cutting holes in cases. I have a new case that has little room to hide any PSU cables anywhere. Al. If you have the pin removal tools and a decent soldering iron (or new pins and a crimping tool), you can make the cables any length you need/want. Using a modular PSU would make it quite easy to do (albeit time consuming) since you could mount your PSU in place, then measure your cables individually without the others getting in the way. I thought of that. I do know someone that has all the tools for the job. Many times she has offered to bring them home from work. This time I think I will take her up on that. This is the first time I ever worked on such a small case and some of those beefy PSU have very large and long wires. Long you can take care of, but large, not so much :-) You certainly don't want to try to use smaller wiring. Good luck and take your time. Certainly don't want any crossed wires here. Thanks. I have dealt with wires before. I know the importance of the correct gage and type of wire I would be using. Depending on if I decide to purchase a new unit which would be modular or simply hack one up I already have I will be very careful. Al. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
tidying up wires | JEH | Homebuilt PC's | 9 | August 26th 07 11:39 PM |
1907FPT wires ? | dwolf | Dell Computers | 1 | January 8th 07 03:12 PM |
Why is HP cutting on memory? | TonyTheJavaTiger | Printers | 8 | November 10th 06 12:11 AM |
Video/GPU Fan - 2 wires vs 3 wires | TC | Homebuilt PC's | 1 | April 23rd 04 11:51 PM |
cutting psu wires | Pen | General | 4 | July 27th 03 07:49 PM |