If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Mainborad Soltek Sl-75FRN2-L and AMD Athlon Xp2200+ processor
Hello,
I am having a problem with my Soltek Sl-75FRN2-L mainboard and my AMD Athlon Xp2200+ processor. The processor will only run at 1350Mhz though it supposed to be running at 1800Mhz. Do you know if the mainboard and the processor is compatible with each other?? Best Regards Magnus Skovde Sweden |
#2
|
|||
|
|||
Hi Magnus,
Clock speed is a function of Front Side Bus (FSB) speed x CPU Multiplier. The default . The Soltek BIOS defaults the FSB to 100mHz and the CPU multiplier for the XP2200+ to 13.5x. So 100 x 13.5 = 1350mHz. To change this, go into BIOS Setup (press Delete on the POST boot screen), then go to Advanced Chipset Features. Change the FSB frequency from 100mHz to 133 mHz and save settings. On reboot, you chould find your clock speed is now 133mHz x 13.5 = 1795.5Mhz (which is close enough to 1800). Of course you can overclock higher than this and there are several great articles ont he newsgroups. Also a good idea to make sure you've got the latest BIOS (www.soltek.com.tw) nVidia drivers etc. Cheers. (Lager) wrote in message . com... Hello, I am having a problem with my Soltek Sl-75FRN2-L mainboard and my AMD Athlon Xp2200+ processor. The processor will only run at 1350Mhz though it supposed to be running at 1800Mhz. Do you know if the mainboard and the processor is compatible with each other?? Best Regards Magnus Skovde Sweden |
Thread Tools | |
Display Modes | |
|
|