A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » Homebuilt PC's
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Power Supply Questions



 
 
Thread Tools Display Modes
  #1  
Old December 31st 06, 10:16 PM posted to alt.comp.hardware.pc-homebuilt
Mike Azzopardi
external usenet poster
 
Posts: 2
Default Power Supply Questions

Hi

Thanks for any info in advance to help me get a power supply.

1) Will a psu bought in the US work in the UK? (they seem a lot
cheaper)
2) I've looked on newegg.com and there seems a ton of branded power
supplies around the $60-70 mark. Assuming I can use one in the UK can
someone please suggest a good QUIET one. My PC is a P4 3.2Ghz Chip with
a 7600GT 256MB graphics card, 1Gig RAM, 2IDE drives etc. I think I need
one with a minimum 350W so anything above for that price would be
great. The quieter the better please.

Thanks again
Mike

  #2  
Old December 31st 06, 10:40 PM posted to alt.comp.hardware.pc-homebuilt
Rod Speed
external usenet poster
 
Posts: 8,559
Default Power Supply Questions

Mike Azzopardi wrote

Thanks for any info in advance to help me get a power supply.


1) Will a psu bought in the US work in the UK? (they seem a lot cheaper)


Yep. Just avoid the cheapest crap which may not always.

2) I've looked on newegg.com and there seems a ton of branded power
supplies around the $60-70 mark. Assuming I can use one in the UK can
someone please suggest a good QUIET one. My PC is a P4 3.2Ghz Chip
with a 7600GT 256MB graphics card, 1Gig RAM, 2IDE drives etc. I think
I need one with a minimum 350W so anything above for that price would
be great. The quieter the better please.



  #3  
Old December 31st 06, 11:00 PM posted to alt.comp.hardware.pc-homebuilt
Dave
external usenet poster
 
Posts: 190
Default Power Supply Questions


"Mike Azzopardi" wrote in message
oups.com...
Hi

Thanks for any info in advance to help me get a power supply.

1) Will a psu bought in the US work in the UK? (they seem a lot
cheaper)


I think so. Most power supplies have a voltage selector, so . . . the only
thing that might prevent you from using it would be if the wall outlet
doesn't match the power cord. Check the pictures of the power cords
supplied to see if they match power cords you use over there. BUT: If you
buy the power supply in the U.S., it will be set at 110/115/120 (depending
on how it's labelled) by default. So DO NOT plug it in until you set the
voltage to 220/230, or whatever.

2) I've looked on newegg.com and there seems a ton of branded power
supplies around the $60-70 mark. Assuming I can use one in the UK can
someone please suggest a good QUIET one. My PC is a P4 3.2Ghz Chip with
a 7600GT 256MB graphics card, 1Gig RAM, 2IDE drives etc. I think I need
one with a minimum 350W so anything above for that price would be
great. The quieter the better please.

Thanks again
Mike


If you want quiet, you might have to up your price a bit. You could run OK
with a Seasonic S12-380, but I'd feel more comfortable suggesting something
in the ~450W range. The seasonic 380 would handle your rig fine though, as
it is very efficient.
http://www.axiontech.com/prdt.php?item=75462

The following is pretty quiet, and extremely high quality:
http://www.directron.com/enp5246g.html

A couple other good quiet ones:
http://www.provantage.com/antec-neo-he430~7ANTS02C.htm
http://www.atacom.com/program/print_...&USER _ID=www

( FSP400-60GLN )



  #4  
Old December 31st 06, 11:04 PM posted to alt.comp.hardware.pc-homebuilt
Bob Fry
external usenet poster
 
Posts: 206
Default Power Supply Questions

It should with the appropriate wall adapter; but before you buy check
the specifications and make sure the PSU accepts your voltage and Hz.

I just got a Corsair HX Series CMPSU-520HX 520W from ZipZoomFly
(https://www.zipzoomfly.com/jsp/Produ...ctCode=373100).
$115, more than your range, but very good quality.

Manufacturer: http://www.corsairmicro.com/corsair/...er_supply.html
Reviews:
http://www.silentpcreview.com/article692-page1.html
http://www.legitreviews.com/article/371/1/
http://www.pcper.com/article.php?aid=279

BTW, http://www.silentpcreview.com or http://www.endpcnoise.com will
have recommendations for a range of PSUs in all price ranges.
--
The husband who wants a happy marriage should learn to keep his mouth
shut and his checkbook open.
Groucho Marx
  #5  
Old January 1st 07, 12:40 AM posted to alt.comp.hardware.pc-homebuilt
Rod Speed
external usenet poster
 
Posts: 8,559
Default Power Supply Questions

Bob Fry wrote

It should with the appropriate wall adapter;


The usual thing is to use a UK power cord.

but before you buy check the specifications and
make sure the PSU accepts your voltage and Hz.


The Hz is never an issue with PC power supplys.

I just got a Corsair HX Series CMPSU-520HX 520W from ZipZoomFly
(https://www.zipzoomfly.com/jsp/Produ...ctCode=373100).
$115, more than your range, but very good quality.


Manufacturer: http://www.corsairmicro.com/corsair/...er_supply.html
Reviews:
http://www.silentpcreview.com/article692-page1.html
http://www.legitreviews.com/article/371/1/
http://www.pcper.com/article.php?aid=279


BTW, http://www.silentpcreview.com or http://www.endpcnoise.com will
have recommendations for a range of PSUs in all price ranges.



  #6  
Old January 1st 07, 07:11 PM posted to alt.comp.hardware.pc-homebuilt
Mike Azzopardi
external usenet poster
 
Posts: 2
Default Power Supply Questions

Thanks for all the replies guys. I checked out the links and noticed
that most of the newer psus have a 24 pin connector
(http://images10.newegg.com/NeweggIma...151-022-12.jpg)
while my motherboard
(http://www.intel.com/design/motherbd/lc/d865GLC_lg.jpg), has only 20
pins. How can I get around this?

Happy new year!

  #7  
Old January 1st 07, 09:25 PM posted to alt.comp.hardware.pc-homebuilt
Rod Speed
external usenet poster
 
Posts: 8,559
Default Power Supply Questions

Mike Azzopardi wrote:
Thanks for all the replies guys. I checked out the links and noticed
that most of the newer psus have a 24 pin connector
(http://images10.newegg.com/NeweggIma...151-022-12.jpg)
while my motherboard
(http://www.intel.com/design/motherbd/lc/d865GLC_lg.jpg), has only 20
pins. How can I get around this?


Quite a few power supplys with 24 pin connectors allow you to snap off the extra 4 pins.

And quite a few motherboard with 20 pin connectors can have
the 24 pin plug plugged in with the extra 4 pins not in use. Thats
not as desirable, it may cause confusion later etc.


  #8  
Old January 1st 07, 09:32 PM posted to alt.comp.hardware.pc-homebuilt
Dave
external usenet poster
 
Posts: 190
Default Power Supply Questions


"Mike Azzopardi" wrote in message
ups.com...
Thanks for all the replies guys. I checked out the links and noticed
that most of the newer psus have a 24 pin connector
(http://images10.newegg.com/NeweggIma...151-022-12.jpg)
while my motherboard
(http://www.intel.com/design/motherbd/lc/d865GLC_lg.jpg), has only 20
pins. How can I get around this?

Happy new year!


Look closer at the image you just posted. Most newer power supplies have a
modular connector for the mainboard. The extra 4 pins just slide off of the
20-pin cable, if your mainboard only has a 20-pin connector on it. -Dave


  #9  
Old January 2nd 07, 05:41 AM posted to alt.comp.hardware.pc-homebuilt
spodosaurus
external usenet poster
 
Posts: 410
Default Power Supply Questions

Dave wrote:
"Mike Azzopardi" wrote in message
ups.com...
Thanks for all the replies guys. I checked out the links and noticed
that most of the newer psus have a 24 pin connector
(http://images10.newegg.com/NeweggIma...151-022-12.jpg)
while my motherboard
(http://www.intel.com/design/motherbd/lc/d865GLC_lg.jpg), has only 20
pins. How can I get around this?

Happy new year!


Look closer at the image you just posted. Most newer power supplies have a
modular connector for the mainboard. The extra 4 pins just slide off of the
20-pin cable, if your mainboard only has a 20-pin connector on it. -Dave



I've done this with two older (relatively) mainboards now using two
newer Antec PSUs. No issues.

Ari

--
spammage trappage: remove the underscores to reply
Many people around the world are waiting for a marrow transplant. Please
volunteer to be a marrow donor and literally save someone's life:
http://www.abmdr.org.au/
http://www.marrow.org/
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Power supply can zap motherboard? Eric Popelka Homebuilt PC's 8 June 18th 05 08:54 PM
UPS unit needed for the P4C800E-Deluxe jimbo Asus Motherboards 46 April 12th 05 05:17 PM
Motherboard Power Requirements arifi Asus Motherboards 27 February 24th 05 11:31 AM
GW Power Supply Feedback RDBrimmer Gateway Computers 9 October 22nd 04 07:15 PM
PSU Fans Muttly General 16 February 13th 04 10:42 PM


All times are GMT +1. The time now is 07:48 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.