|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
July 23rd 04, 11:19 AM
|
|||
|
|||
SNMP on Perc Array Manager on a 2550
Problem Description: I am trying to monitor raid array status on a
number of dell boxes. This is effectively done by snmpwalking (or snmpgetting) the box on the relevant OID. This works fine for most hardware, however I am having difficulty with some 2550s running PERC 3/Di raid array controllers. I am not getting any response from the SNMP agent. I can get a response on the OpenManage OIDs, eg snmpwalk x.x.x.x public enterprises.674 I get all sorts of information about chassis etc from Openmanage. However the Perc raid controller SNMP agent is not giving anything. According to the MIB, I should be able to snmpwalk on OID (for example) ..1.3.6.1.4.1.3582.1.1.2.1.3. Anyone got any ideas as to why this this isn't working? 
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| RAID Array "Off Line" on P4C800-E Deluxe | macleme | Asus Motherboards | 4 | September 1st 04 07:22 PM |
| what is the LOCALAGENT password for Array manager (Dell Precision 650) | Heikki Lehto | Dell Computers | 4 | April 28th 04 12:05 AM |
| RAID0 Array in Disk Manager | HMSDOC | Homebuilt PC's | 0 | November 2nd 03 06:43 PM |
| help with motherboard choice | S.Boardman | General | 30 | October 20th 03 10:23 PM |
| help with motherboard choice | S.Boardman | Overclocking AMD Processors | 30 | October 20th 03 10:23 PM |
Linear Mode
