If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
OC Celeron 1.2
Has anyone ever OC'd one of these? I have an in the box, never opened 370
pin MB that I'd like to use. It needs a Celeron 1.2 that I'd like to OC. TIA |
#2
|
|||
|
|||
Mark O. Polo wrote:
Has anyone ever OC'd one of these? I have an in the box, never opened 370 pin MB that I'd like to use. It needs a Celeron 1.2 that I'd like to OC. Which board?! 133 x 12 = 1596. I'd expect you to have a higher probability of running it at 133 MHz if you had a Celeron 1.1A or 1.0A. Assuming the board is capable of running the Tualatin without an adapter, if you can manually adjust the voltage and FSB, it will be a lot easier, and you won't have to shoot for the whole 133 MHz. I have modified two MSI boards by drilling out the contact on the socket which made the board detect a 133 MHz CPU, and by soldering pins together on the back of the socket to boost the voltage. It's a bit of a hassle that way. If such extreme measures are necessary, and it won't run at 133MHz, it's not so easily reversible... |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CPU info.- Celeron 2.4 vs Intel P4 | Taishi | General | 20 | April 14th 04 06:12 AM |
Intel® Celeron or Pentium 4 | Per Munster | General | 7 | April 4th 04 08:07 AM |
Choosing between PIII, P4, Celeron 478 on a $100 Budget- Please Help | Dave Arbok | Overclocking | 14 | December 23rd 03 11:06 AM |
Celeron vs. P4HT | techshare | General | 1 | December 4th 03 01:32 AM |
P3-800 vs Celeron 1.4 --> video encoding time | PS | General | 15 | September 21st 03 06:14 PM |