If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
v300 armada help
I have a armada notebook model V300 that has a xircom realport cardbus
ethernet 10/100 card. I can not get the card to use dhcp provided my my router on my home network. The card has an autoconfigured IP address that I can not seem to get rid of. I would really appreciate any and all comments or suggestions as to how to get this machine to connect to my LAN Thanks in advance |
#2
|
|||
|
|||
Two quick items, have you checked the TCP/IP settings and does it have a
software firewall set-up by default? KC "paul s" wrote in message news:qneIc.52490$JR4.24802@attbi_s54... I have a armada notebook model V300 that has a xircom realport cardbus ethernet 10/100 card. I can not get the card to use dhcp provided my my router on my home network. The card has an autoconfigured IP address that I can not seem to get rid of. I would really appreciate any and all comments or suggestions as to how to get this machine to connect to my LAN Thanks in advance |
#3
|
|||
|
|||
The TCP/IP is set to DHCP in the tcp/ip properties whether the Xircom
realport cardbus ethernet 10/100 card is connected to the laptop or not. However, the autoconfigured address in the Xircom realport cardbus ethernet 10/100 card will be autoconfigured to and address that is not in the address range of my router. One more thing ... when the machine is booted with the network cable connected to the netword card, two beeps occur prior to the windows start. The two beeps are not present when the network cable is not plugged in. I do not have the manual that came with the laptop and haven't been able to find one online as of this writing. I also have gotten in to the bios/setup to determine if there was something prior to the operating system boot that was happening that was the source of this problem and discovered nothing. Thanks again and any and all help is very much appreciated. Kevin Childers" wrote in message ... Two quick items, have you checked the TCP/IP settings and does it have a software firewall set-up by default? KC "paul s" wrote in message news:qneIc.52490$JR4.24802@attbi_s54... I have a armada notebook model V300 that has a xircom realport cardbus ethernet 10/100 card. I can not get the card to use dhcp provided my my router on my home network. The card has an autoconfigured IP address that I can not seem to get rid of. I would really appreciate any and all comments or suggestions as to how to get this machine to connect to my LAN Thanks in advance |
#4
|
|||
|
|||
Perhaps HH can offer some guidance here. Pending his comments, have you
checked the resources listed in the Compaq FAQ posted here weekly? KC "paul s" wrote in message news:rtxIc.75048$XM6.41419@attbi_s53... The TCP/IP is set to DHCP in the tcp/ip properties whether the Xircom realport cardbus ethernet 10/100 card is connected to the laptop or not. However, the autoconfigured address in the Xircom realport cardbus ethernet 10/100 card will be autoconfigured to and address that is not in the address range of my router. One more thing ... when the machine is booted with the network cable connected to the netword card, two beeps occur prior to the windows start. The two beeps are not present when the network cable is not plugged in. I do not have the manual that came with the laptop and haven't been able to find one online as of this writing. I also have gotten in to the bios/setup to determine if there was something prior to the operating system boot that was happening that was the source of this problem and discovered nothing. Thanks again and any and all help is very much appreciated. Kevin Childers" wrote in message ... Two quick items, have you checked the TCP/IP settings and does it have a software firewall set-up by default? KC "paul s" wrote in message news:qneIc.52490$JR4.24802@attbi_s54... I have a armada notebook model V300 that has a xircom realport cardbus ethernet 10/100 card. I can not get the card to use dhcp provided my my router on my home network. The card has an autoconfigured IP address that I can not seem to get rid of. I would really appreciate any and all comments or suggestions as to how to get this machine to connect to my LAN Thanks in advance |
#5
|
|||
|
|||
Sorry,
This one stumps me. My only experience dealing with notebook PC card Ethernet was with my Presario 12XL300. I used a Xircom card, but it worked without a hitch with my LinkSys cable/DSL router. I didn't have to configure anything with the PC card or router. HH "Kevin Childers" wrote in message ... Perhaps HH can offer some guidance here. Pending his comments, have you checked the resources listed in the Compaq FAQ posted here weekly? KC "paul s" wrote in message news:rtxIc.75048$XM6.41419@attbi_s53... The TCP/IP is set to DHCP in the tcp/ip properties whether the Xircom realport cardbus ethernet 10/100 card is connected to the laptop or not. However, the autoconfigured address in the Xircom realport cardbus ethernet 10/100 card will be autoconfigured to and address that is not in the address range of my router. One more thing ... when the machine is booted with the network cable connected to the netword card, two beeps occur prior to the windows start. The two beeps are not present when the network cable is not plugged in. I do not have the manual that came with the laptop and haven't been able to find one online as of this writing. I also have gotten in to the bios/setup to determine if there was something prior to the operating system boot that was happening that was the source of this problem and discovered nothing. Thanks again and any and all help is very much appreciated. Kevin Childers" wrote in message ... Two quick items, have you checked the TCP/IP settings and does it have a software firewall set-up by default? KC "paul s" wrote in message news:qneIc.52490$JR4.24802@attbi_s54... I have a armada notebook model V300 that has a xircom realport cardbus ethernet 10/100 card. I can not get the card to use dhcp provided my my router on my home network. The card has an autoconfigured IP address that I can not seem to get rid of. I would really appreciate any and all comments or suggestions as to how to get this machine to connect to my LAN Thanks in advance |
#6
|
|||
|
|||
Same experience her on a couple of similar systems. Only time there
have been issues like this is with default settings on the firewall or TCP/IP issues. Last one I set up was my sons and it connect through a wireless LAN card to a D-Link router. Firewall was on by default in XP. KC "HH" wrote in message ... Sorry, This one stumps me. My only experience dealing with notebook PC card Ethernet was with my Presario 12XL300. I used a Xircom card, but it worked without a hitch with my LinkSys cable/DSL router. I didn't have to configure anything with the PC card or router. HH "Kevin Childers" wrote in message ... Perhaps HH can offer some guidance here. Pending his comments, have you checked the resources listed in the Compaq FAQ posted here weekly? KC "paul s" wrote in message news:rtxIc.75048$XM6.41419@attbi_s53... The TCP/IP is set to DHCP in the tcp/ip properties whether the Xircom realport cardbus ethernet 10/100 card is connected to the laptop or not. However, the autoconfigured address in the Xircom realport cardbus ethernet 10/100 card will be autoconfigured to and address that is not in the address range of my router. One more thing ... when the machine is booted with the network cable connected to the netword card, two beeps occur prior to the windows start. The two beeps are not present when the network cable is not plugged in. I do not have the manual that came with the laptop and haven't been able to find one online as of this writing. I also have gotten in to the bios/setup to determine if there was something prior to the operating system boot that was happening that was the source of this problem and discovered nothing. Thanks again and any and all help is very much appreciated. Kevin Childers" wrote in message ... Two quick items, have you checked the TCP/IP settings and does it have a software firewall set-up by default? KC "paul s" wrote in message news:qneIc.52490$JR4.24802@attbi_s54... I have a armada notebook model V300 that has a xircom realport cardbus ethernet 10/100 card. I can not get the card to use dhcp provided my my router on my home network. The card has an autoconfigured IP address that I can not seem to get rid of. I would really appreciate any and all comments or suggestions as to how to get this machine to connect to my LAN Thanks in advance |
#7
|
|||
|
|||
I use a realport on my old Armada 1592dmt/win98se. You should be able to
manually assign the card's IP address (cuts down on the boot time too). What OS are you using? I'm also thinking you may have a problem w/ your cardbus drivers. I think you should get the two beeps whenever a card starts or stops. "paul s" wrote in message news:rtxIc.75048$XM6.41419@attbi_s53... The TCP/IP is set to DHCP in the tcp/ip properties whether the Xircom realport cardbus ethernet 10/100 card is connected to the laptop or not. However, the autoconfigured address in the Xircom realport cardbus ethernet 10/100 card will be autoconfigured to and address that is not in the address range of my router. One more thing ... when the machine is booted with the network cable connected to the netword card, two beeps occur prior to the windows start. The two beeps are not present when the network cable is not plugged in. I do not have the manual that came with the laptop and haven't been able to find one online as of this writing. I also have gotten in to the bios/setup to determine if there was something prior to the operating system boot that was happening that was the source of this problem and discovered nothing. Thanks again and any and all help is very much appreciated. Kevin Childers" wrote in message ... Two quick items, have you checked the TCP/IP settings and does it have a software firewall set-up by default? KC "paul s" wrote in message news:qneIc.52490$JR4.24802@attbi_s54... I have a armada notebook model V300 that has a xircom realport cardbus ethernet 10/100 card. I can not get the card to use dhcp provided my my router on my home network. The card has an autoconfigured IP address that I can not seem to get rid of. I would really appreciate any and all comments or suggestions as to how to get this machine to connect to my LAN Thanks in advance |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FA: 3 Compaq Armada M700 laptops - GREAT PRICE! FREE SHIPPING IN THE USA!!! | TrueAmerican | General | 1 | December 5th 04 05:20 AM |
Compaq EVO & Armada 65W AC Adapter 239704-001 $10+ship | Dave & Daphne Schertzer | Compaq Computers | 0 | February 12th 04 02:37 AM |
Compaq Armada E500 motherboard info | Paul Brown | Compaq Computers | 1 | November 21st 03 06:55 PM |
Compaq Armada 1700 Sound Card problems | Boonerj | Compaq Computers | 2 | September 5th 03 02:31 AM |
Display problem on Armada E500 | Willie Hertza | Compaq Computers | 0 | August 1st 03 03:59 AM |