If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
New build, USB port problem
Hello,
I've recently got a new build, here are the specs: Motherboard: Asus strix Z270e Gaming CPU: i7-7700K CPU cooler: be quiet! Dark ROCK 3 RAM: Ballistix sport lt 16GB kit (2x 8GB) Graphic Card: MSI GTX 1080 gaming Z 8G SSD: 2x Samsung 950 EVO 500G M2 + Crucial MX100 256G SATA HDD: WD Green WD20EARS 2TB Optical drive: ASUS DRW-24D5MT PSU: Corsair RM650X (is this PSU too weak? ) Case: be quiet! silent base 600 Installed windows 10 and everything runs fine, except some USB port problems. When a USB drive is inserted, no mater a stick or external HDD and no matter which USB port is used, it won't eject properly. When I click the 'safely remove hardware...' icon and eject the USB drive, there's neither notification such as 'the USB mass.....can be safely removed...', nor 'the drive is busy..blabla..' but the disk will disappear from the list (also disappear in disk management) and leave only the safely remove icon there. After this happens (and it happens quite often), when I want to shutdown the PC and it won't. I have to turn it off by pressing the power button on the case. All these usb drives are working fine on another PC running windows 7. Could this be a hardware problem or is it just a Windows 10 problem? I am seriously thinking to install windows 7 on this new build, but it seems there are a lot of work to do with a M2 SSD. If anyone had the same issue, any advice is appreciated! |
#3
|
|||
|
|||
New build, USB port problem
On Tuesday, July 25, 2017 at 1:10:42 PM UTC+2, Paul wrote:
wrote: Hello, I've recently got a new build, here are the specs: Motherboard: Asus strix Z270e Gaming CPU: i7-7700K CPU cooler: be quiet! Dark ROCK 3 RAM: Ballistix sport lt 16GB kit (2x 8GB) Graphic Card: MSI GTX 1080 gaming Z 8G SSD: 2x Samsung 950 EVO 500G M2 + Crucial MX100 256G SATA HDD: WD Green WD20EARS 2TB Optical drive: ASUS DRW-24D5MT PSU: Corsair RM650X (is this PSU too weak? ) Case: be quiet! silent base 600 Installed windows 10 and everything runs fine, except some USB port problems. When a USB drive is inserted, no mater a stick or external HDD and no matter which USB port is used, it won't eject properly. When I click the 'safely remove hardware...' icon and eject the USB drive, there's neither notification such as 'the USB mass.....can be safely removed...', nor 'the drive is busy..blabla..' but the disk will disappear from the list (also disappear in disk management) and leave only the safely remove icon there. After this happens (and it happens quite often), when I want to shutdown the PC and it won't. I have to turn it off by pressing the power button on the case. All these usb drives are working fine on another PC running windows 7. Could this be a hardware problem or is it just a Windows 10 problem? I am seriously thinking to install windows 7 on this new build, but it seems there are a lot of work to do with a M2 SSD. If anyone had the same issue, any advice is appreciated! I'm guessing you are not alone (Win10 issue). https://www.windows10forums.com/thre...ect-icon.2397/ Paul Thanks for the reply, Paul. It seems to be merely a problem of corrupt USB driver. Solved by removing the USB root hub in device manager and restart the computer. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Older Packard Bell (Build date 1998) USB port question. | kraut | Packard Bell Computers | 3 | February 17th 07 03:46 AM |
SWsoft Acronis Disk Director Suite 9.0 Build 508, Acronis OS Selector 8.0 Build 917, Acronis Partition Expert 2003 Build 292, Acronis Power Utilities 2004 Build 502, F-SECURE.ANTI vIRUS.PROXY v1.10.17.WINALL, F-SECURE.ANTI vIRUS v5.50.10260 for CITRI | vvcd | Storage (alternative) | 3 | December 4th 05 11:46 AM |
first build.. problem | Christo | Abit Motherboards | 21 | September 10th 04 02:45 PM |
D865PERL mouse problem? PS2 port problem? | Mike | Intel | 0 | April 21st 04 04:38 AM |
Problem with build | Paul Watt | General | 2 | February 3rd 04 10:03 PM |