A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » General
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Motherboard config. question.



 
 
Thread Tools Display Modes
  #1  
Old August 28th 03, 02:22 PM
Just Nice
external usenet poster
 
Posts: n/a
Default Motherboard config. question.

Could someone out there enlighten me more about my socket 478 motherboard,
please!

Brand: Unknown (a US$79.00 tag).
Chipset: VIA P4M266A.
Bios Model: Phoenix-Award Bios V6 00PG.
Supports Intel P4, 533MHz CPU; Front Side Bus.
Two 184-pin DDR SDRAM sockets.
Claims to support up to 2GB DRAMs; (512 x8/16 DRAM technology)
2.5 DRAM interface for DDR SDRAM.

My OS is WinMe (with the latest updates); 384 Mb of 266Mb DDR266 SDRAM;
Intel P4 2.4Gb processor; 40Gb HD (with 4 partitions)

With regard to that, how could I best optimize my machine, please?


--
"The disadvantage of a wise man is his
reliance upon the less-wise to say that he is one!"

From the 'unquotables' of:-
Just Nice.


  #2  
Old August 29th 03, 11:23 AM
Ben
external usenet poster
 
Posts: n/a
Default

I did a Google search for P4M266A and came up with this
http://www.via.com.tw/en/apollo/p4m266.jsp and a
number of links to cheapo motherboard makers like
Biostar, ECS and Chaintech. Your board has a VIA chipset with intergrated S3
Savage graphics which is not very fast and doesnt support Transform &
Lighting which is commonly used in current 3D games. If youre not a gamer or
just run older games be happy with what youve got - but if you want to play
Half-Life 2 etc ... then look at spending £70 approx on a Nvidia or ATI
graphics card.


"Just Nice" wrote in message
...
Could someone out there enlighten me more about my socket 478 motherboard,
please!

Brand: Unknown (a US$79.00 tag).
Chipset: VIA P4M266A.
Bios Model: Phoenix-Award Bios V6 00PG.
Supports Intel P4, 533MHz CPU; Front Side Bus.
Two 184-pin DDR SDRAM sockets.
Claims to support up to 2GB DRAMs; (512 x8/16 DRAM technology)
2.5 DRAM interface for DDR SDRAM.

My OS is WinMe (with the latest updates); 384 Mb of 266Mb DDR266 SDRAM;
Intel P4 2.4Gb processor; 40Gb HD (with 4 partitions)

With regard to that, how could I best optimize my machine, please?


--
"The disadvantage of a wise man is his
reliance upon the less-wise to say that he is one!"

From the 'unquotables' of:-
Just Nice.




  #3  
Old August 29th 03, 01:26 PM
Just Nice
external usenet poster
 
Posts: n/a
Default

Ben wrote:
|| I did a Google search for P4M266A and came up with this
|| http://www.via.com.tw/en/apollo/p4m266.jsp and a
|| number of links to cheapo motherboard makers like
|| Biostar, ECS and Chaintech. Your board has a VIA chipset with
|| intergrated S3 Savage graphics which is not very fast and doesnt
|| support Transform & Lighting which is commonly used in current 3D
|| games. If youre not a gamer or just run older games be happy with
|| what youve got - but if you want to play Half-Life 2 etc ... then
|| look at spending £70 approx on a Nvidia or ATI graphics card.

Thanks, Ben. I am not a gamer though, but quite heavy on graphic editing.


--
"The disadvantage of a wise man is his
reliance upon the less-wise to say that he is one!"

From the 'unquotables' of:-
Just Nice.



---
Virus free says AVG, but thou may choose not to agree!
Scan again, just in case the virus runs free!
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.514 / Virus Database: 312 - Release Date: 28/08/2003


  #4  
Old August 30th 03, 03:32 AM
Just Nice
external usenet poster
 
Posts: n/a
Default


||| Thanks, Ben. I am not a gamer though, but quite heavy on graphic
||| editing.
||
|| That video is plenty fast enough for 2D work, the only issue would be
|| if you're editing VERY large images, in which case the 32(?)MB shared
|| memory might cause some lag when scrolling/zooming/etc in magnified
|| modes.
||
||
|| Dave

Dear Dave,

Indeed! I assigned 32Mbytes of shared memory (the maximum) on graphics.
Could there be some other ways to reduce/overcome the lag/stress in future
works? Have you any tips to share?

--
From the 'unquotables' of:-
Just Nice.

"The disadvantage of a wise man is his
reliance upon the less-wise to say that he is one!"



---
Virus free says AVG, but thou may choose not to agree!
Scan again, just in case the virus runs free!
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.514 / Virus Database: 312 - Release Date: 28/08/2003


  #5  
Old August 30th 03, 04:16 AM
kony
external usenet poster
 
Posts: n/a
Default

On Sat, 30 Aug 2003 10:32:26 +0800, "Just Nice"
wrote:


||| Thanks, Ben. I am not a gamer though, but quite heavy on graphic
||| editing.
||
|| That video is plenty fast enough for 2D work, the only issue would be
|| if you're editing VERY large images, in which case the 32(?)MB shared
|| memory might cause some lag when scrolling/zooming/etc in magnified
|| modes.
||
||
|| Dave

Dear Dave,

Indeed! I assigned 32Mbytes of shared memory (the maximum) on graphics.
Could there be some other ways to reduce/overcome the lag/stress in future
works? Have you any tips to share?


There is no way to overcome it, the zoomed image is essentially
treated as a much larger image, needing enough memory to hold it.
There'd be this same problem with only 32MB of memory on a dedicated
video card.

Of course the best way to increase this onboard video performance is
to run the memory bus at the very highest speed possible, overclocking
it. That can take a lot of testing since you certainly don't want
seemingly random memory errors. Play around with the memory timings
too, checking with Memtest86 can both give you memory throughput
scores and an idea of the ceiling capabilities of the memory, though
if you were to add additional memory you'd then have to retest again
since inevitably more modules will decrease the stable ceiling speed.
http://www.memtest86.com


Dave
  #6  
Old August 30th 03, 09:52 AM
Just Nice
external usenet poster
 
Posts: n/a
Default



There is no way to overcome it, the zoomed image is essentially
treated as a much larger image, needing enough memory to hold it.
There'd be this same problem with only 32MB of memory on a dedicated
video card.

Of course the best way to increase this onboard video performance is
to run the memory bus at the very highest speed possible, overclocking
it. That can take a lot of testing since you certainly don't want
seemingly random memory errors. Play around with the memory timings
too, checking with Memtest86 can both give you memory throughput
scores and an idea of the ceiling capabilities of the memory, though
if you were to add additional memory you'd then have to retest again
since inevitably more modules will decrease the stable ceiling speed.
http://www.memtest86.com


Dave


Thanks Dave. I will give it my best shot.:-)

--
"The disadvantage of a wise man is his
reliance upon the less-wise to say that he is one!"

From the 'unquotables' of:-
Just Nice.


---
Virus free says AVG, but thou may choose not to agree!
Scan again, just in case the virus runs free!
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.514 / Virus Database: 312 - Release Date: 28/08/2003


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Since powersupply burnt out motherboard, what to do with components? S.Heenan General 4 August 11th 03 03:15 PM
motherboard battery failure? AD C General 4 August 3rd 03 04:50 PM
Motherboard FSB - Newbie Question mac General 1 August 2nd 03 03:16 AM
Chaintech 7NIF2 motherboard - memory problems Wuahn General 1 July 26th 03 01:29 PM
Motherboard Monitor Settings MiniDisc_2k2 General 1 June 25th 03 01:44 AM


All times are GMT +1. The time now is 04:31 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.