If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
How fast would those old 16-bit chips go if they were made with modernproduction?
The old original 8086 & 8088 topped out at 10Mhz (originally produced at
4.77Mhz). The 80186 & 80188 were the embedded versions of the 808x, but otherwise pretty close to identical. Well, it looks like the question has been answered: between 55 & 66Mhz. EEProductCenter.com :: Intel-compatible processors upgraded to operate up to 66 MHz "The IA186EB and IA188EB are form, fit, and function compatible with the original Intel 80C186EB, 80C188EB, 80L186EB, and 80L188EB 16-bit high-integration embedded processors. Additionally, they have been upgraded to operate at 5.0V or 3.3V. The Innovasic version operates up to 66 MHz at 5.0V and up to 55 MHz at 3.3V." http://www.eeproductcenter.com/micro...leID=210201596 |
#2
|
|||
|
|||
How fast would those old 16-bit chips go if they were made withmodern production?
Yousuf Khan wrote:
The old original 8086 & 8088 topped out at 10Mhz (originally produced at 4.77Mhz). The 80186 & 80188 were the embedded versions of the 808x, but otherwise pretty close to identical. Well, it looks like the question has been answered: between 55 & 66Mhz. EEProductCenter.com :: Intel-compatible processors upgraded to operate up to 66 MHz "The IA186EB and IA188EB are form, fit, and function compatible with the original Intel 80C186EB, 80C188EB, 80L186EB, and 80L188EB 16-bit high-integration embedded processors. Additionally, they have been upgraded to operate at 5.0V or 3.3V. The Innovasic version operates up to 66 MHz at 5.0V and up to 55 MHz at 3.3V." http://www.eeproductcenter.com/micro...leID=210201596 I'd be curious to know any further information on the technology used, since they don't really mention much in the article. Our 4Mb generation was 5.0/3.3, and our 16Mb generation started that way, but once we went SDRAM, 5.0 was a thing of the past. Our current technologies have I/Os that can live in a 3.3 world, but it's quite painful to deal with such high voltages. What a laugh! I remember the rough days of getting down to 5.0-only, and the circuit challenges of getting decent performance with such low voltages. DP |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How fast would those old 16-bit chips go if they were made with modernproduction? | Yousuf Khan | General | 2 | October 20th 08 11:23 AM |
Other advancements were also being made to improve the durability ofthe wristwatch. The faces were replace with ones made of synthetic plastic.This made them much more durable and resistant to breaking and cracking.Another advancement was in the dial | [email protected] | Printers | 0 | April 26th 08 12:32 AM |
Other advancements were also being made to improve the durability ofthe wristwatch. The faces were replace with ones made of synthetic plastic.This made them much more durable and resistant to breaking and cracking.Another advancement was in the dial | [email protected] | Homebuilt PC's | 0 | April 21st 08 11:16 AM |
Home-made SSI chips | JJ | Homebuilt PC's | 3 | September 22nd 03 01:42 AM |