If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Marvel G450 Vid-tools caps NTSC at 30, not 29.97 fps?
Hi, I'm trying to cap some old NTSC tapes with my Marvel G450 eTV card to
the 704x576 MPEG-2 format using Vid-Tools 2.10.10 but am having the following problem: The software only captures at 30 fps, with no option to switch this to 29.97 (the edit box is greyed out) This means that, played back at 29.97, the captured video suffers from an A/V desync of about 4 seconds / per hour Does anyone know of a workaround to force capture at the correct rate? TIA Mike |
#2
|
|||
|
|||
Workaround: Use Ulead MediaStudio Pro 7. You can choose the parameters you
want for capturing / editing with this card. -- regards, |\ /| | \/ |@rk \../ \/os "mmartins" schreef in bericht ... Hi, I'm trying to cap some old NTSC tapes with my Marvel G450 eTV card to the 704x576 MPEG-2 format using Vid-Tools 2.10.10 but am having the following problem: The software only captures at 30 fps, with no option to switch this to 29.97 (the edit box is greyed out) This means that, played back at 29.97, the captured video suffers from an A/V desync of about 4 seconds / per hour Does anyone know of a workaround to force capture at the correct rate? TIA Mike |
#3
|
|||
|
|||
Thanks, I'm trying it now and it looks good
"Linea Recta" wrote in message ... Workaround: Use Ulead MediaStudio Pro 7. You can choose the parameters you want for capturing / editing with this card. -- regards, |\ /| | \/ |@rk \../ \/os "mmartins" schreef in bericht ... Hi, I'm trying to cap some old NTSC tapes with my Marvel G450 eTV card to the 704x576 MPEG-2 format using Vid-Tools 2.10.10 but am having the following problem: The software only captures at 30 fps, with no option to switch this to 29.97 (the edit box is greyed out) This means that, played back at 29.97, the captured video suffers from an A/V desync of about 4 seconds / per hour Does anyone know of a workaround to force capture at the correct rate? TIA Mike |
#4
|
|||
|
|||
All right, another tip: if you want to capture in real good quality get the
prog. AVI_IO. http://www.nct.ch/multimedia/avi_io/ This is compatible with your card and captures to AVI. Use lossless compression for AVI (latest version of hyffyuv). After this you can edit (if desired) in Ulead MSP7 and for final step render to DVD-compliant MPG2. This procedure may take a little more time and effort but it gives the highest quality. Never re-edit MPG2, but consider MPG2 a an end format. -- regards, |\ /| | \/ |@rk \../ \/os "mmartins" schreef in bericht ... Thanks, I'm trying it now and it looks good "Linea Recta" wrote in message ... Workaround: Use Ulead MediaStudio Pro 7. You can choose the parameters you want for capturing / editing with this card. -- regards, |\ /| | \/ |@rk \../ \/os "mmartins" schreef in bericht ... Hi, I'm trying to cap some old NTSC tapes with my Marvel G450 eTV card to the 704x576 MPEG-2 format using Vid-Tools 2.10.10 but am having the following problem: The software only captures at 30 fps, with no option to switch this to 29.97 (the edit box is greyed out) This means that, played back at 29.97, the captured video suffers from an A/V desync of about 4 seconds / per hour Does anyone know of a workaround to force capture at the correct rate? TIA Mike |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
marvel g450 | Ralph Hampton | Matrox Videocards | 1 | January 23rd 04 11:30 PM |
Dutch and Belgian users of Marvel G450 eTV TT users | Linea Recta | Matrox Videocards | 0 | July 28th 03 10:55 PM |
Matrox Marvel G450 TV I/O vs NVIDIA or ATI | Don Lindbergh | Matrox Videocards | 0 | July 2nd 03 01:36 AM |