|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
June 2nd 07, 09:11 AM
posted to alt.comp.periphs.mainboard.asus
|
|||
|
|||
no beep codes...
Built a system with a Asus K8N4-E its worked for about 4 to 5 months ok but
now it has stopped working... When I starteded it up there was no signal going to the monitor so I thought this was a problem with the graphics card.... there are no beep codes or anything from the system.... I have even taken out the card and memory to see if I can get any beep codes from it but there are none... There is power going to the motherboard as the green light is on..... If anyone has any advice 
|
|
#2
June 2nd 07, 09:57 AM
posted to alt.comp.periphs.mainboard.asus
|
|||
|
|||
|
no beep codes...
"clinne" wrote in message ... Built a system with a Asus K8N4-E its worked for about 4 to 5 months ok but now it has stopped working... When I starteded it up there was no signal going to the monitor so I thought this was a problem with the graphics card.... there are no beep codes or anything from the system.... I have even taken out the card and memory to see if I can get any beep codes from it but there are none... There is power going to the motherboard as the green light is on..... If anyone has any advice Next thing is to try a different power supply.
|
|
#3
June 2nd 07, 10:57 AM
posted to alt.comp.periphs.mainboard.asus
|
|||
|
|||
|
no beep codes...
Will do.... I'll see if I can borrow one from a friend
"Venom" wrote in message ... "clinne" wrote in message ... Built a system with a Asus K8N4-E its worked for about 4 to 5 months ok but now it has stopped working... When I starteded it up there was no signal going to the monitor so I thought this was a problem with the graphics card.... there are no beep codes or anything from the system.... I have even taken out the card and memory to see if I can get any beep codes from it but there are none... There is power going to the motherboard as the green light is on..... If anyone has any advice Next thing is to try a different power supply.
|
|
#4
June 3rd 07, 09:23 AM
posted to alt.comp.periphs.mainboard.asus
|
|||
|
|||
|
no beep codes...
I've found I'm using a 20 pin psu and the motherboard has a 24 pin connector
I think this is the problem... the maual say you can use a 20 pin psu on the motherboard... the board is a K8N4-E.... with a 500 watt psu... Do you think that changing the psu to 24 pin one will sort out the problem.. "Venom" wrote in message ... "clinne" wrote in message ... Built a system with a Asus K8N4-E its worked for about 4 to 5 months ok but now it has stopped working... When I starteded it up there was no signal going to the monitor so I thought this was a problem with the graphics card.... there are no beep codes or anything from the system.... I have even taken out the card and memory to see if I can get any beep codes from it but there are none... There is power going to the motherboard as the green light is on..... If anyone has any advice Next thing is to try a different power supply.
|
|
#5
June 3rd 07, 11:11 AM
posted to alt.comp.periphs.mainboard.asus
|
|||
|
|||
|
no beep codes...
Sounds like you fitted the motherboard into an old case. The new
motherboards like plenty of juice so get yourself a new power supply. "clinne" wrote in message ... I've found I'm using a 20 pin psu and the motherboard has a 24 pin connector I think this is the problem... the maual say you can use a 20 pin psu on the motherboard... the board is a K8N4-E.... with a 500 watt psu... Do you think that changing the psu to 24 pin one will sort out the problem.. "Venom" wrote in message ... "clinne" wrote in message ... Built a system with a Asus K8N4-E its worked for about 4 to 5 months ok but now it has stopped working... When I starteded it up there was no signal going to the monitor so I thought this was a problem with the graphics card.... there are no beep codes or anything from the system.... I have even taken out the card and memory to see if I can get any beep codes from it but there are none... There is power going to the motherboard as the green light is on..... If anyone has any advice Next thing is to try a different power supply.
|
|
#6
June 3rd 07, 01:53 PM
posted to alt.comp.periphs.mainboard.asus
|
|||
|
|||
|
no beep codes...
Just added a 20 pin to 24 pin converter made no differance will try a
different power suply unit... "Venom" wrote in message ... Sounds like you fitted the motherboard into an old case. The new motherboards like plenty of juice so get yourself a new power supply. "clinne" wrote in message ... I've found I'm using a 20 pin psu and the motherboard has a 24 pin connector I think this is the problem... the maual say you can use a 20 pin psu on the motherboard... the board is a K8N4-E.... with a 500 watt psu... Do you think that changing the psu to 24 pin one will sort out the problem.. "Venom" wrote in message ... "clinne" wrote in message ... Built a system with a Asus K8N4-E its worked for about 4 to 5 months ok but now it has stopped working... When I starteded it up there was no signal going to the monitor so I thought this was a problem with the graphics card.... there are no beep codes or anything from the system.... I have even taken out the card and memory to see if I can get any beep codes from it but there are none... There is power going to the motherboard as the green light is on..... If anyone has any advice Next thing is to try a different power supply.
|
|
#7
June 4th 07, 12:07 AM
posted to alt.comp.periphs.mainboard.asus
|
|||
|
|||
|
no beep codes...
Don't forget to plug in the little 4 pin plug from the power supply to the
motherboard either. It will not work without that little sucker left unplugged. "clinne" wrote in message ... Just added a 20 pin to 24 pin converter made no differance will try a different power suply unit... "Venom" wrote in message ... Sounds like you fitted the motherboard into an old case. The new motherboards like plenty of juice so get yourself a new power supply. "clinne" wrote in message ... I've found I'm using a 20 pin psu and the motherboard has a 24 pin connector I think this is the problem... the maual say you can use a 20 pin psu on the motherboard... the board is a K8N4-E.... with a 500 watt psu... Do you think that changing the psu to 24 pin one will sort out the problem.. "Venom" wrote in message ... "clinne" wrote in message ... Built a system with a Asus K8N4-E its worked for about 4 to 5 months ok but now it has stopped working... When I starteded it up there was no signal going to the monitor so I thought this was a problem with the graphics card.... there are no beep codes or anything from the system.... I have even taken out the card and memory to see if I can get any beep codes from it but there are none... There is power going to the motherboard as the green light is on..... If anyone has any advice Next thing is to try a different power supply.
|
|
#8
June 8th 07, 04:45 AM
posted to alt.comp.periphs.mainboard.asus
|
|||
|
|||
|
no beep codes...
Try to re-seat the processor... Sounds strange, but I have seen this cure
such a problem before... "clinne" wrote in message ... Just added a 20 pin to 24 pin converter made no differance will try a different power suply unit... "Venom" wrote in message ... Sounds like you fitted the motherboard into an old case. The new motherboards like plenty of juice so get yourself a new power supply. "clinne" wrote in message ... I've found I'm using a 20 pin psu and the motherboard has a 24 pin connector I think this is the problem... the maual say you can use a 20 pin psu on the motherboard... the board is a K8N4-E.... with a 500 watt psu... Do you think that changing the psu to 24 pin one will sort out the problem.. "Venom" wrote in message ... "clinne" wrote in message ... Built a system with a Asus K8N4-E its worked for about 4 to 5 months ok but now it has stopped working... When I starteded it up there was no signal going to the monitor so I thought this was a problem with the graphics card.... there are no beep codes or anything from the system.... I have even taken out the card and memory to see if I can get any beep codes from it but there are none... There is power going to the motherboard as the green light is on..... If anyone has any advice Next thing is to try a different power supply.
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| beep codes | Jocelyn Hébert | Asus Motherboards | 2 | January 13th 06 11:39 PM |
| Beep codes | RDellinger | Asus Motherboards | 8 | August 8th 04 05:14 AM |
| Need help with beep codes.. | Paul | Asus Motherboards | 0 | April 13th 04 03:15 AM |
| Beep codes | erich hauser | Asus Motherboards | 1 | January 31st 04 09:06 PM |
| beep codes | Bill Earley | Abit Motherboards | 1 | January 2nd 04 01:08 PM |
Linear Mode
