PB911 Front Panel Connectors Pinout. Does anyone have the diagram? Many Thanks!

No I do not
First off the on/off header is V
http://www.uktsupport.co.uk/pb/mb/911.htm
The odd pins on headerDD Front Panel Header (J13)

are the ones wher the leds and softpower go

They are always adjacent as such as 3-5 7-9 etc
Plugging a led onto the wrong odd ones will not cause any problem
do to the internal resistance and the voltages that are present and since
most leds only operate in reverse voltage as it refers to the pn junction
I would try a led at 3-5 first and go from there
The only problem I see is the reset switch



"joso" wrote in message
news:_mBVe.189890$Hk.129828@pd7tw1no...

Hello,did you ever get the pinout figured out.I ran some continuity tests
from the orig silk screen on the MB to the actual pin connectors.Still
trying to figure things out,just got the MB at local hamfest and would
like to get it up and running.Tnx