If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
old computer acting odd
My computer has been booting fine and there's no picture sometimes. I
restart it, sometimes several times. I will get words on the screen as it's booting that are "fuzzy". IMO I think the video chip is going. It's never really acted that way til lately. It's 14 yo. I can expect something Bill |
#2
|
|||
|
|||
old computer acting odd
Bill Cunningham wrote:
My computer has been booting fine and there's no picture sometimes. I restart it, sometimes several times. I will get words on the screen as it's booting that are "fuzzy". IMO I think the video chip is going. It's never really acted that way til lately. It's 14 yo. I can expect something Bill CRT or LCD ? Has the monitor been tested on another computer ? What shape is the monitor data cable in ? Is it a captive cable that is permanently fixed on the monitor end ? Sometimes the male pins on the connector, get pushed back through the mounting plate. I had that happen once on a VGA. Modern cables don't tend to do that. DVI aren't likely to be a problem either. But an older cheesy captive VGA cable might. If the video card has a fan, you can check that the fan still runs. (I have an inspection mirror and LED flashlight I use to check.) Some coolers (like the one on my NVIdia card) have "channels" leading from the fan blade area, and those can become blocked. That's about all the visual check I can suggest. You can do a visual inspection of the surface of the video card. A lot of video cards I've looked at, use polymer caps (sealed top, no "K" stamped in the metal). And those usually hold up pretty well. The only way the letters could get "fuzzy", is possibly a sync problem (sync signal sliced at slightly different place each time). Maybe the fuzz is only in one direction or vector when that happens. You would not expect a "spherical" fuzz pattern around each pixel or something. when GPUs fail, or when the RAM around the GPU fails, you can get squares or large "spots" of discoloration. This might be the misinterpretation of the contents of video RAM as simple geometric objects. Making a fuzzy "halo" around a letter, is too complicated. But a sync slicing failure, might make the letters fuzzy from side to side. It's just as likely to be a monitor problem, or a cabling problem, as an actual GPU failure. And for GPUs, fan failure and meltdown is one of the nifty ways those can blow out. That's why you have to inspect the fan when you hear a strange sound, or smell plastic burning. I took the video card apart on my current machine, and re-did the thermal paste - based on the info I was getting from Speedfan. That also gave me a chance to inspect the fan fully. You have to be careful when re-assembling, not to crack the silicon die, if one is exposed. After I cleaned the paste off, my GPU die was shiny as can be. And ready for fresh paste. The result was not much of an improvement in temperature, but at least I knew my fan was clean. Paul |
#3
|
|||
|
|||
old computer acting odd
On 09/27/2017 11:46 AM, Bill Cunningham wrote:
My computer has been booting fine and there's no picture sometimes. I restart it, sometimes several times. I will get words on the screen as it's booting that are "fuzzy". IMO I think the video chip is going. It's never really acted that way til lately. It's 14 yo. I can expect something Bill Remove and re-seat the video cable as a starter. Should that not do the trick... if your machine has a video card, remove it and clean the contacts . I usually clean contacts with a clean sheet of white paper. If that does not work, replace or add a video card. |
#4
|
|||
|
|||
old computer acting odd
"Paul" wrote in message news Bill Cunningham wrote: My computer has been booting fine and there's no picture sometimes. I restart it, sometimes several times. I will get words on the screen as it's booting that are "fuzzy". IMO I think the video chip is going. It's never really acted that way til lately. It's 14 yo. I can expect something Bill CRT or LCD ? Flat screen LCD. A dell monitor. Not very old. Has the monitor been tested on another computer ? No not yet. What shape is the monitor data cable in ? Is it a captive cable that is permanently fixed on the monitor end ? Sometimes the male pins on the connector, get pushed back through the mounting plate. I had that happen once on a VGA. Modern cables don't tend to do that. DVI aren't likely to be a problem either. But an older cheesy captive VGA cable might. If the video card has a fan, you can check that the fan still runs. (I have an inspection mirror and LED flashlight I use to check.) Some coolers (like the one on my NVIdia card) have "channels" leading from the fan blade area, and those can become blocked. That's about all the visual check I can suggest. You can do a visual inspection of the surface of the video card. A lot of video cards I've looked at, use polymer caps (sealed top, no "K" stamped in the metal). And those usually hold up pretty well. The only way the letters could get "fuzzy", is possibly a sync problem (sync signal sliced at slightly different place each time). Maybe the fuzz is only in one direction or vector when that happens. You would not expect a "spherical" fuzz pattern around each pixel or something. when GPUs fail, or when the RAM around the GPU fails, you can get squares or large "spots" of discoloration. This might be the misinterpretation of the contents of video RAM as simple geometric objects. Making a fuzzy "halo" around a letter, is too complicated. But a sync slicing failure, might make the letters fuzzy from side to side. It's just as likely to be a monitor problem, or a cabling problem, as an actual GPU failure. And for GPUs, fan failure and meltdown is one of the nifty ways those can blow out. That's why you have to inspect the fan when you hear a strange sound, or smell plastic burning. I took the video card apart on my current machine, and re-did the thermal paste - based on the info I was getting from Speedfan. That also gave me a chance to inspect the fan fully. You have to be careful when re-assembling, not to crack the silicon die, if one is exposed. After I cleaned the paste off, my GPU die was shiny as can be. And ready for fresh paste. The result was not much of an improvement in temperature, but at least I knew my fan was clean. I will check the cables. The monitor could have a bad connection. I really didn't think of that. You speak of geometric squares. Well I have seen them at times. Not for a while though. Some of them flash. Bill |
#5
|
|||
|
|||
old computer acting odd
"Paul" wrote in message news Bill Cunningham wrote: .... The monitor cable to the back of the tower both have screws on each end to screw into the pins. Bill |
#6
|
|||
|
|||
old computer acting odd
Bill Cunningham wrote:
I will check the cables. The monitor could have a bad connection. I really didn't think of that. You speak of geometric squares. Well I have seen them at times. Not for a while though. Some of them flash. Bill Check the fan on the video card. Flashing squares could mean bad video RAM on the video card, or a GPU problem. Paul |
#7
|
|||
|
|||
old computer acting odd
"Paul" wrote in message news Bill Cunningham wrote: I will check the cables. The monitor could have a bad connection. I really didn't think of that. You speak of geometric squares. Well I have seen them at times. Not for a while though. Some of them flash. Bill Check the fan on the video card. Flashing squares could mean bad video RAM on the video card, or a GPU problem. I turn the machine on and can hear things loading and booting and the screen is dark. Then the box pops up enter power save mode. So the screen just isn't coming on. Bill |
#8
|
|||
|
|||
old computer acting odd
On Wed, 27 Sep 2017 16:36:49 -0400, "Bill Cunningham"
wrote: "Paul" wrote in message news Bill Cunningham wrote: ... The monitor cable to the back of the tower both have screws on each end to screw into the pins. Bill Maybe the Motherboard battery has run down; get a new one, and clean the terminals too. |
#9
|
|||
|
|||
old computer acting odd
"Peter Jason" wrote in message ... On Wed, 27 Sep 2017 16:36:49 -0400, "Bill Cunningham" wrote: "Paul" wrote in message news Bill Cunningham wrote: ... The monitor cable to the back of the tower both have screws on each end to screw into the pins. Bill Maybe the Motherboard battery has run down; get a new one, and clean the terminals too. What kind of battery is it? I usds to see those things all the time. Now I can't seem to find them. My video chip is embeded on the mobo too. It's not a PCI card or anything. Bill |
#10
|
|||
|
|||
old computer acting odd
"philo" wrote in message news On 09/27/2017 11:46 AM, Bill Cunningham wrote: My computer has been booting fine and there's no picture sometimes. I restart it, sometimes several times. I will get words on the screen as it's booting that are "fuzzy". IMO I think the video chip is going. It's never really acted that way til lately. It's 14 yo. I can expect something Bill Remove and re-seat the video cable as a starter. Should that not do the trick... if your machine has a video card, remove it and clean the contacts . I usually clean contacts with a clean sheet of white paper. If that does not work, replace or add a video card. I do know on my old ATI xpress 200 chip the video memory is part of the main DDRAM. There is no separate video memory on this machine. Bill |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Computer acting funny after crash | brassplyer | Homebuilt PC's | 3 | July 28th 10 03:12 PM |
Photosmart pr. acting up | PE | Printers | 1 | September 15th 05 06:43 AM |
HP 812c Acting up! | John Watson | Printers | 0 | April 19th 04 05:18 PM |
Fullscreen is acting odd | jonba | General | 2 | February 1st 04 09:32 AM |