If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Gigabyte GA-P35 DS3P - RAM?
Gigabyte GA-P35 DS3P - What RAM would you recommend?
Someone told me this motherboard is "really fast", so it should have fast ram. What do you think? |
#2
|
|||
|
|||
Gigabyte GA-P35 DS3P - RAM?
"bornfree" wrote in message ... Gigabyte GA-P35 DS3P - What RAM would you recommend? Someone told me this motherboard is "really fast", so it should have fast ram. What do you think? I think you should read the manual and purchase RAM according to your planned use which may or may not include overclocking. Gigabytes website has a detailed PDF on memory support brands and types. It's not a DDR3 board or a 1333Mhz board. It's a DDR2 1066Mhz board. So I wouldn't recomend you go out and buy "really fast" RAM without doing some checking. http://www.gigabyte.com.tw/Products/...ProductID=2533 |
#3
|
|||
|
|||
Gigabyte GA-P35 DS3P - RAM?
'bornfree' wrote:
Gigabyte GA-P35 DS3P - What RAM would you recommend? Someone told me this motherboard is "really fast", so it should have fast ram. What do you think? _____ You should select RAM based on the FSB speed for the CPU. And on whether or not you intend to overclock by raising the FSB speed. And whether or not you wish to run the Memory clock synched to the CPU clock. And whether or not you are willing to spend the money for the diminishing performance returns as you increase the RAM speed. And THAT is affected by the size of the L2 cache, the applications you use, and the number of cores in the CPU. FINALLY, after all those decisions, THEN you want to make sure the motherboard can handle the Memory clock speed of the RAM you select. Oh, yes, also you must select the right TYPE of RAM for the motherboard DDR2 or DDR3. And every thing 'Augustus' posted. Plus consider that a 32-bit Windows operating system can't use much more than 2 GBytes of memory, especially if you one or two display adapters with large memories (each byte of display adapter memory makes one byte of motherboard memory between 2 GBytes and 4 GBytes unusable. Phil Weldon "bornfree" wrote in message ... Gigabyte GA-P35 DS3P - What RAM would you recommend? Someone told me this motherboard is "really fast", so it should have fast ram. What do you think? |
#4
|
|||
|
|||
Gigabyte GA-P35 DS3P - RAM?
On Wed, 27 Feb 2008 16:48:42 -0800 (PST), bornfree
wrote: ,;Gigabyte GA-P35 DS3P - What RAM would you recommend? ,; ,;Someone told me this motherboard is "really fast", so it should have ,;fast ram. What do you think? I can't speak to this board but I can speak to its sister, the GA-P35-DS3L. I ordered this board as a bundle assembled and tested. I usually do this as I feel the extra $10 is worthwhile while to avoid DOA components. No problem with sticking it in the case and firing it up with a live CD (Reatogo) so I went ahead with the installation (Vista). It got about 3/4 of the way through installation and hung. Tried again and same result. Tried a different Vista CD with the same result. Three different XP CDs and one Win2000 Pro also hung part way through the installation. I suspected bad memory so I removed one stick (1GB). Now it booted to the splash screen and hung. Problem solved? Not quite. Switched to the other memory stick and it hung on the first splash screen again. I called the vendor tech support and discussed the situation. He looked up the order and they had installed DDR2 533 memory. The board supports DDR2 667, 800, & 1066. We did a memory exchange and the OS installation went flawlessly. The moral to the story... Stay with the memory recommended by the board manufacturer. |
#5
|
|||
|
|||
Gigabyte GA-P35 DS3P - RAM?
Unknown wrote:
The moral to the story... Stay with the memory recommended by the board manufacturer. No, the moral of the story is that not all stories have morals. Always run Memtest before you even *think* about installing the operating system. |
#6
|
|||
|
|||
Gigabyte GA-P35 DS3P - RAM?
'Fishface' wrote:
No, the moral of the story is that not all stories have morals. Always run Memtest before you even *think* about installing the operating system. _____ "No, the moral of the story is that not all stories have morals." Soon to be a classic B^) Phil Weldon "Fishface" ? wrote in message news:Urzxj.5200$O64.402@trndny03... Unknown wrote: The moral to the story... Stay with the memory recommended by the board manufacturer. |
#7
|
|||
|
|||
Gigabyte GA-P35 DS3P - RAM?
On 28 Feb, 12:27, Unknown wrote:
I called the vendor tech support and discussed the situation. He looked up the order and they had installed DDR2 533 memory. The board supports DDR2 667, 800, & 1066. I currently have DDR2 800 installed. Will going up to 1066 make a noticeable difference to performance? My CPU is an Intel E6300 OC'd to 2.8Ghz. My HDD is a 500GB Samsung 7,200RPM SATA. |
#8
|
|||
|
|||
Gigabyte GA-P35 DS3P - RAM?
Hi Guys
I have this same MB and 4GB of this ram: http://www.newegg.com/product/produc...82E16820231098 Vista is giving me a 4.8 rating (lowest one) and I wondered if my bios settings are set wrong? I'm running a C2D 4500 2.4@ 2.9 mhz on "auto voltage" (OC setting) or similiar. all my friends w/the same ram on Asus MB's are getting a rating of 5.7/5.8. thx bob "bornfree" wrote in message ... On 28 Feb, 12:27, Unknown wrote: I called the vendor tech support and discussed the situation. He looked up the order and they had installed DDR2 533 memory. The board supports DDR2 667, 800, & 1066. I currently have DDR2 800 installed. Will going up to 1066 make a noticeable difference to performance? My CPU is an Intel E6300 OC'd to 2.8Ghz. My HDD is a 500GB Samsung 7,200RPM SATA. |
#9
|
|||
|
|||
Gigabyte GA-P35 DS3P - RAM?
bob johnson wrote:
Hi Guys I have this same MB and 4GB of this ram: http://www.newegg.com/product/produc...82E16820231098 Vista is giving me a 4.8 rating (lowest one) and I wondered if my bios settings are set wrong? I'm running a C2D 4500 2.4@ 2.9 mhz on "auto voltage" (OC setting) or similiar. all my friends w/the same ram on Asus MB's are getting a rating of 5.7/5.8. thx bob http://www.cpuid.com/cpuz.php Use that, as it will tell you how the BIOS set up the processor and RAM. Once you see what's up, manual settings can be used to put things right. Paul "bornfree" wrote in message ... On 28 Feb, 12:27, Unknown wrote: I called the vendor tech support and discussed the situation. He looked up the order and they had installed DDR2 533 memory. The board supports DDR2 667, 800, & 1066. I currently have DDR2 800 installed. Will going up to 1066 make a noticeable difference to performance? My CPU is an Intel E6300 OC'd to 2.8Ghz. My HDD is a 500GB Samsung 7,200RPM SATA. |
#10
|
|||
|
|||
Gigabyte GA-P35 DS3P - RAM?
Thanks, Paul
I'm confused here. I'm running a c2d 4500 running a 272x11 (2.99) but cpu-z and windows is reporting stock speed (200x11= 2.2) Here are the cpu-z memory settings: 200 mhz 1:1 4.0 clocks 3 clocks 3 clocks 8 clocks 2t Thanks for the help, bob "Paul" wrote in message ... bob johnson wrote: Hi Guys I have this same MB and 4GB of this ram: http://www.newegg.com/product/produc...82E16820231098 Vista is giving me a 4.8 rating (lowest one) and I wondered if my bios settings are set wrong? I'm running a C2D 4500 2.4@ 2.9 mhz on "auto voltage" (OC setting) or similiar. all my friends w/the same ram on Asus MB's are getting a rating of 5.7/5.8. thx bob http://www.cpuid.com/cpuz.php Use that, as it will tell you how the BIOS set up the processor and RAM. Once you see what's up, manual settings can be used to put things right. Paul "bornfree" wrote in message ... On 28 Feb, 12:27, Unknown wrote: I called the vendor tech support and discussed the situation. He looked up the order and they had installed DDR2 533 memory. The board supports DDR2 667, 800, & 1066. I currently have DDR2 800 installed. Will going up to 1066 make a noticeable difference to performance? My CPU is an Intel E6300 OC'd to 2.8Ghz. My HDD is a 500GB Samsung 7,200RPM SATA. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gigabyte P35-DS3P | bornfree | Overclocking | 26 | February 4th 08 02:46 PM |
Gigabyte GA-P35-DS3P BIOS beep codes not documented, CPU problems | RoundSparrow | Gigabyte Motherboards | 3 | August 10th 07 07:58 PM |
Gigabyte DS3P S3 standby issue | alfhenrik | Gigabyte Motherboards | 6 | August 8th 07 07:14 AM |
Gigabyte ga-p35-ds3p hyperthreading | verukins | Gigabyte Motherboards | 1 | July 15th 07 08:35 AM |