A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Motherboards » Asus Motherboards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Keep Getting Network 2



 
 
Thread Tools Display Modes
  #1  
Old June 16th 19, 06:00 PM posted to alt.comp.periphs.mainboard.asus
Bill Anderson
external usenet poster
 
Posts: 248
Default Keep Getting Network 2

I'm running an Asus X299-A system with its Intel Network Adapter. I'm
running Win10 64-bit and I've updated the LAN driver to the latest I can
find, v22.9.16.0. My device shown in Device Manager is called Intel(R)
Ethernet Connection (2) I219-V. I've checked the Intel forums and
discovered lots of people are seeing that (2) in the name and can't
figure out why it's there. Even the Intel techs on the forum don't have
a good answer.

I can live with the unexplained (2) in the name, but I'm pulling my hair
out over a possibly unrelated intermittent problem with connection on
boot: sometimes -- rarely I admit, maybe once in 20 boots -- I am
momentarily puzzled at logon to find I can connect to only a few
websites and others are unavailable. Something's wrong!

I've learned from experience that at this point I need to look at my
network connection which will now be named "Network 2" instead of the
normal "Network." With that confirmed, I've learned to go into Device
Manager, look under Network Adapters, uninstall the Intel Ethernet
Connection (2), open Action/Scan for Hardware Changes, and with the scan
complete I will have my Intel Ethernet Connection (2) device back in the
Device Manager list, and I'll also have my "Network" connection back and
functioning normally without the "2." This happens once every 20 boots
or so, and I have no idea what to do about it. As I'm grasping at
straws, I'm wondering if the "(2)" in the network adapter's name can be
confusing the LAN driver as it tries to make a connection at boot? It
sees the (2) in the adapter name and creates a special (but barely
functional) Network 2 connection for it? Maybe? Any other ideas? Thanks.


--
Bill Anderson

I am the Mighty Favog
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to Share (network) a Hewlett Packard HP Photosmart 8250 acrossa network Barry Watzman Printers 0 April 7th 09 01:29 AM
Network card for wired & wireless network? maspiers General 3 August 2nd 07 03:24 PM
Looking for network print server that also provides network connected storage and other features. G.L. Cross Printers 0 January 16th 06 05:03 PM
Select your network printer by its location instead of its network name Quantanics Printers 0 December 6th 05 07:13 PM
Select your network printer by its location instead of its (confusing) network name Quantanics Printers 0 July 23rd 05 06:23 PM


All times are GMT +1. The time now is 07:58 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2004-2019 HardwareBanter.
The comments are property of their posters.