MGA G-200 AGP Problem

Hi folks,

i have a Matrox G200 AGP video card. (MGA-G200A-D2) that stays black
until windows starts. I´d like to use it in a router, but now I´m not
sure, if it´s working stable.

Does anyone know this problem? I tried several mainboards, but always
the same symptom ...

Thanx,

Denis

If this card has a TV out , turn it off,,
I had a G200-TV and when it was set to out put to TV was on , then my
monitor was black untill window started..

DrSpider


"Denis Wollenhaupt" wrote in message
...

Hi folks,

i have a Matrox G200 AGP video card. (MGA-G200A-D2) that stays black
until windows starts. I´d like to use it in a router, but now I´m not
sure, if it´s working stable.

Does anyone know this problem? I tried several mainboards, but always
the same symptom ...

Thanx,

Denis

Hi DrSpider

ThanX for your reply, but can´t be the problem. This card does not have
TV-OUT. Do you have any other ideas?

Bye,

Denis


__________________________________________________ ___________________

If this card has a TV out , turn it off,,
I had a G200-TV and when it was set to out put to TV was on , then my
monitor was black untill window started..

DrSpider

Some information for you,,,

http://forum.matrox.com/mga/viewtopi...ghlight=bootup
http://forum.matrox.com/mga/viewtopi...ghlight=bootup


If this doesn't help, I don't know what else i can do.

DrSpider

"Denis Wollenhaupt" wrote in message
...
Hi DrSpider

ThanX for your reply, but can´t be the problem. This card does not have
TV-OUT. Do you have any other ideas?

Bye,

Denis


__________________________________________________ ___________________

If this card has a TV out , turn it off,,
I had a G200-TV and when it was set to out put to TV was on , then my
monitor was black untill window started..

DrSpider

"Denis Wollenhaupt" wrote in message
...
ThanX for your reply, but can´t be the problem. This card does
not have TV-OUT. Do you have any other ideas?

The video card's BIOS is corrupted and needs reflashing. You'll need to
force reflash the BIOS and probably the card's PINS file too, although I
unfortunately don't have a G200 series file here. If you search the
matroxusers.com's forum you should be able to find what you need.
--


Richard Hopkins
Cardiff, Wales, United Kingdom
(replace .nospam with .com in reply address)

The UK's leading technology reseller www.dabs.com
Get the most out of your digital photos www.dabsxpose.com

hi richard,

thanx for your reply. I will try to do so.
I´ll keep you up to date.

regards,

Denis



Richard Hopkins schrieb:

"Denis Wollenhaupt" wrote in message
...
ThanX for your reply, but can´t be the problem. This card does
not have TV-OUT. Do you have any other ideas?

The video card's BIOS is corrupted and needs reflashing. You'll need to
force reflash the BIOS and probably the card's PINS file too, although I
unfortunately don't have a G200 series file here. If you search the
matroxusers.com's forum you should be able to find what you need.
--

Richard Hopkins
Cardiff, Wales, United Kingdom
(replace .nospam with .com in reply address)

The UK's leading technology reseller www.dabs.com
Get the most out of your digital photos www.dabsxpose.com

"Denis Wollenhaupt" wrote in message
...
hi richard,

thanx for your reply. I will try to do so.
I´ll keep you up to date.

Try looking here Denis:

http://grafi.ii.pw.edu.pl/gbm/matrox/

If you look through Grzegorz's site you'll find PINS files for the G200
series as well as the emergency BIOS flash instructions and recovery tools.

The only issue, and one I forgot to mention earlier, is that you'll need to
borrow (or find) a PCI graphics card of some sort in order to boot the
system in command line mode before you can get to fixing your Matrox.
--


Richard Hopkins
Cardiff, Wales, United Kingdom
(replace .nospam with .com in reply address)

The UK's leading technology reseller www.dabs.com
Get the most out of your digital photos www.dabsxpose.com