my x800pro test results

The GPU/mem seems to max out at 544/560, I start to see
glitches at 551/573. My 3dmark03 score is 8275.
This on a 13 multiplier P4, 3.37 Ghz, 512MB DDR.
All fsaa/anio turned off.

Jeff B

So try the 16pipe mod already.

rms

The GPU/mem seems to max out at 544/560, I start to see
glitches at 551/573. My 3dmark03 score is 8275.
This on a 13 multiplier P4, 3.37 Ghz, 512MB DDR.
All fsaa/anio turned off.

Whilst I have not seen many posts from users of this card I would have
expected a much higher score than yours, with the spec of the rest of your
machine being as it is.

--
Regards


Morgan

Hard Drive noise a problem....?

www.flyinglizard.freeserve.co.uk

"Morgan" wrote in message
...

Whilst I have not seen many posts from users of this card I would have
expected a much higher score than yours, with the spec of the rest of
your
machine being as it is.



I was kind of thinking the same thing. I'd be interested to hear what
other people are getting for scores and what their processor is.

"rms" wrote in message
. ..
So try the 16pipe mod already.

rms



yeah!

Morgan wrote:
The GPU/mem seems to max out at 544/560, I start to see
glitches at 551/573. My 3dmark03 score is 8275.
This on a 13 multiplier P4, 3.37 Ghz, 512MB DDR.
All fsaa/anio turned off.


Whilst I have not seen many posts from users of this card I would have
expected a much higher score than yours, with the spec of the rest of your
machine being as it is.


I also ran timedemo1 from Call of Duty, 1280x1024. My old card,
nvidia 5600u did 58 fps, the x800 did 139. The biggest win is
Far Cry. On the opening scene, 5600u did 13 fps (static)
x800 does 91! In a timedemo (benchumall) it was 11.7/53.5 fps for the
5600u/x800 in Far Cry.
As to 3dm03, I just saw that I was running 2x/2x fsaa/anio on my openGL
control panel. I'll try again with 0x/0x to see if it matters.

BTW, the x800 was WAY underclocked OOTB. It was set to
only 475/450, but with Rage clocking til, it does 544/560,
and went from 7035 to 8275 in 3dm03.

Jeff B

rms wrote:
So try the 16pipe mod already.

rms



I'll definitely be doing it if I decide to keep this
card.

Jeff B

I reran 3dm03 with the OpenGL tab turning off
anio and fsaa, previously they were set at 2x.
My score rose to 10105 from 8275.
Comments?

Jeff B

On Wed, 02 Jun 2004 16:12:45 GMT, jeff b wrote:

I reran 3dm03 with the OpenGL tab turning off
anio and fsaa, previously they were set at 2x.
My score rose to 10105 from 8275.
Comments?

In your original message you said "All fsaa/anio turned off". Also,
3DMark2003 is D3D, not OpenGL.
--
Andrew. To email unscramble & remove spamtrap.
Help make Usenet a better place: English is read downwards,
please don't top post. Trim messages to quote only relevant text.
Check groups.google.com before asking a question.

In your original message you said "All fsaa/anio turned off". Also,
3DMark2003 is D3D, not OpenGL.

I reran the test, and the OGL score is unaffected
by the OGL tab. I believe I must have changed the D3D tab,
so my scores are 8275/10105 with fsaa and anio set to 2x/0x.

Thanks for pointing out my error.

Jeff B