If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Compaq Presario R3000Z won't read 1Gb SD&MMC
I've got a compaq presario r3000z laptop, purchased in september 2004.
It won't read 1GB SD&MMC cards in the integrated card slots. Smaller cards are fine, up to 256MB. I don't know about 512MB, as I haven't got one that size to try. So far as I know I have the latest driver for the card reader, since I didn't find a newer one on the compaq support website. Cards work just fine if plugged in through an external USB card reader. Any suggestions on how to make the integrated card reader read 1GB+ cards? |
#2
|
|||
|
|||
I have the same notebook as you, purchased in June of 04 and I have a 512MB
SanDisk SD card, it reads it fine. "HelDC" wrote in message oups.com... I've got a compaq presario r3000z laptop, purchased in september 2004. It won't read 1GB SD&MMC cards in the integrated card slots. Smaller cards are fine, up to 256MB. I don't know about 512MB, as I haven't got one that size to try. So far as I know I have the latest driver for the card reader, since I didn't find a newer one on the compaq support website. Cards work just fine if plugged in through an external USB card reader. Any suggestions on how to make the integrated card reader read 1GB+ cards? |
#3
|
|||
|
|||
Same here. I thought I was alone in this issue. I have tried both the
Lexar and SanDisk 1gb cards and it will not read either. It will read the 512mb cards. I thought there might be something wrong with the SanDisk 1gb card and purchased the Lexar with the same issue. I have to read the cards by using a 8 in 1 Card reader connected to the USB. What a dissappointment. Additionally checked HP/Compact support for updates to know avail, and posted a help request. HelDC wrote: I've got a compaq presario r3000z laptop, purchased in september 2004. It won't read 1GB SD&MMC cards in the integrated card slots. Smaller cards are fine, up to 256MB. I don't know about 512MB, as I haven't got one that size to try. So far as I know I have the latest driver for the card reader, since I didn't find a newer one on the compaq support website. Cards work just fine if plugged in through an external USB card reader. Any suggestions on how to make the integrated card reader read 1GB+ cards? |
#4
|
|||
|
|||
You're definitely not alone in having this problem. The problem occured
for me with a generic MMC, and a PNY SD. I wonder how many help requests HP has to get before they do something to fix it. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Compaq FAQ | HH | Compaq Computers | 0 | December 19th 04 12:58 PM |
Compaq FAQ | HH | Compaq Computers | 0 | October 10th 04 12:49 PM |
Compaq FAQ | HH | Compaq Computers | 0 | September 23rd 04 12:21 PM |
Compaq FAQ | HH | Compaq Computers | 0 | July 17th 04 08:30 PM |
Compaq FAQ | HH | Compaq Computers | 0 | April 25th 04 10:45 PM |