If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Printing in Irix using cups, foomatic, & hpijs
Hello,
I am attempting to install/configure an HP Color LaserJet 3600dn printer on a Silicon Graphics (SGI) Octane system running Irix 6.5.5. The printer and system are connected via ethernet and the printer is ping'able from the system. I have Open SuSE 10.2 and Windows XP system that can print correctly to this printer verifying that the printer is fully operational. My initial attempt to print from the Octane was by using an old HP LaserJet 5M postscript driver through the printers GUI from the toolchest. This resulted in the printer printing one page with a few lines of garbage and then maybe twenty blank pages. I then tried a few of the other available drivers with similar or no results. I tried sharing the printer on one of the Open SuSE systems and configuring my Octane to print to another host, again through the printers GUI. This also failed. I have now removed all of the printing software from my Octane and installed the CUPS, Foomatic, xpp, hpijs, a2ps packages, and all package dependencies. The installed packages are from the most recent SGI Freeware CDs. # uname -Ra IRIX64 Launch 6.5 6.5.5f 07151440 IP30 # versions | grep -i cups I fw_cups 08/01/2007 cups-1.1.19 Common UNIX Printing System I fw_cups.man 08/01/2007 cups-1.1.19 man pages I fw_cups.man.cups 08/01/2007 cups-1.1.19 man pages I fw_cups.man.doc 08/01/2007 cups-1.1.19 misc. documentation I fw_cups.man.relnotes 08/01/2007 cups-1.1.19 release notes I fw_cups.sw 08/01/2007 cups-1.1.19 execution only env I fw_cups.sw.cups 08/01/2007 cups-1.1.19 execution only env I fw_cups.sw.hdr 08/01/2007 cups-1.1.19 header files I fw_cups.sw.lib 08/01/2007 cups-1.1.19 shared libraries I fw_cups.sw.samba 08/01/2007 cups-1.1.19 Windows NT/2000/XP drivers I fw_foomatic-filters 08/01/2007 foomatic-filters-3.0.0 filter scripts for CUPS + Ghostscript I fw_ghostscript.sw.cups 08/01/2007 ghostscript-7.05 CUPS non-PS printer support I fw_gimp-print 08/01/2007 gimp-print-4.2.5 print facility for GIMP and CUPS I fw_gimp-print.sw.cups 08/01/2007 gimp-print-4.2.5 CUPS driver I fw_xpp 08/01/2007 xpp-1.1 X Printing Panel for CUPS # versions | grep -i foomatic I fw_foomatic-filters 08/01/2007 foomatic-filters-3.0.0 filter scripts for CUPS + Ghostscript I fw_foomatic-filters.man 08/01/2007 foomatic-filters-3.0.0 man pages I fw_foomatic-filters.man.doc 08/01/2007 foomatic-filters-3.0.0 misc. documentation I fw_foomatic-filters.man.foomatic-filters 08/01/2007 foomatic- filters-3.0.0 man pages I fw_foomatic-filters.man.relnotes 08/01/2007 foomatic- filters-3.0.0 release notes I fw_foomatic-filters.sw 08/01/2007 foomatic-filters-3.0.0 execution only env I fw_foomatic-filters.sw.foomatic-filters 08/01/2007 foomatic- filters-3.0.0 execution only env # versions | grep -i xpp I fw_xpp 08/01/2007 xpp-1.1 X Printing Panel for CUPS I fw_xpp.man 08/01/2007 xpp-1.1 man pages I fw_xpp.man.relnotes 08/01/2007 xpp-1.1 release notes I fw_xpp.sw 08/01/2007 xpp-1.1 execution only env I fw_xpp.sw.xpp 08/01/2007 xpp-1.1 execution only env # versions | grep -i hpijs I fw_hpijs 08/02/2007 hpijs-1.4.1 HP IJS printer drivers for Ghostscript I fw_hpijs.man 08/02/2007 hpijs-1.4.1 man pages I fw_hpijs.man.doc 08/02/2007 hpijs-1.4.1 misc. documentation I fw_hpijs.man.relnotes 08/02/2007 hpijs-1.4.1 release notes I fw_hpijs.src 08/02/2007 hpijs-1.4.1 original source code I fw_hpijs.src.hpijs 08/02/2007 hpijs-1.4.1 original source code I fw_hpijs.sw 08/02/2007 hpijs-1.4.1 execution only env I fw_hpijs.sw.hpijs 08/02/2007 hpijs-1.4.1 execution only env # versions | grep -i a2ps I fw_a2ps 08/02/2007 a2ps-4.13b Pretty-print files in postscript I fw_a2ps.man 08/02/2007 a2ps-4.13b man pages I fw_a2ps.man.a2ps 08/02/2007 a2ps-4.13b man pages I fw_a2ps.man.info 08/02/2007 a2ps-4.13b info pages I fw_a2ps.man.relnotes 08/02/2007 a2ps-4.13b release notes I fw_a2ps.src 08/02/2007 a2ps-4.13b original source code I fw_a2ps.src.a2ps 08/02/2007 a2ps-4.13b original source code I fw_a2ps.sw 08/02/2007 a2ps-4.13b execution only env I fw_a2ps.sw.a2ps 08/02/2007 a2ps-4.13b execution only env I used chkconfig to turn on fw_cups and rebooted the system. Using the documentation I found on SGI's Freeware website I pointed Netscape at localhost:631 to administrate CUPS. I installed my printer using the following procedu 1.) Clicked on "Printers" in the horizontal link menu 2.) Clicked on "Add New Printer" 3.) Entered in the following information a.) Name: HPLaserJet b.) Location: MEI COS Lab c.) Description: HP Color LaserJet 3600dn 4.) Selected "AppSocket/HP JetDirect" in the "Device:" drop-down menu 5.) Entered in "socket://laserjet:9100" for "Device URL:" 6.) Selected "HP" for "Make:" 7.) Selected "HP Color LaserJet 3600 Foomatic/hpijs (en)" for "Model:" *laserjet is a known hostname in /etc/hosts # ping laserjet PING LaserJet (198.49.246.214): 56 data bytes 64 bytes from 198.49.246.214: icmp_seq=0 ttl=64 time=0.542 ms That completed the installation of the printer. When I clicked on "Print Test Page" my printer errors with "Chosen Personality Not Available". Further, when I type "echo hello | lp" I get the same error message. The output of lpstat -t shows: # lpstat -t scheduler is running system default destination: HPLaserJet device for HPLaserJet: socket://laserjet:9100/ HPLaserJet accepting requests since Jan 01 00:00 printer HPLaserJet is idle. enabled since Jan 01 00:00 I have no idea why this isn't working. Any help would be appreciated. Thanks in advance, Rob |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Installing new PPD files for CUPS | Geico Caveman | Printers | 1 | April 4th 06 03:27 PM |
HPOJ over ethernet with CUPS setup. | Longfellow | Printers | 1 | November 12th 05 02:48 AM |
hp g85 gimp or cups printing from Mac OS X 10.4 Tiger - how do Iset it to draft mode? | hupjack | Printers | 0 | August 28th 05 10:01 PM |
Dual-sided printing w/Officejet 7310 under SUSE 9.1 & CUPS | Jerry E. Miller | Printers | 1 | February 21st 05 11:49 AM |
Setting up network access for a CUPS printer | Madhusudan Singh | Printers | 0 | September 8th 04 09:29 AM |