A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » Storage & Hardrives
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

EMC DS-16B2 fibre switch ogin issue



 
 
Thread Tools Display Modes
  #1  
Old August 2nd 07, 05:40 PM posted to comp.arch.storage
emcpa07
external usenet poster
 
Posts: 3
Default EMC DS-16B2 fibre switch ogin issue

Purchased a EMC DS-16B2 off Ebay. Everything works fine i.e., system
tests etc.. However before it performs its POST the switch loads
VxWorks then proceeds to Fabric OS v3.2.0a for which the "typical"
login: admin; passwd: password fails. Does anyone know a method of
reseting factory defaults?

Ron

  #2  
Old August 2nd 07, 07:48 PM posted to comp.arch.storage
emcpa07
external usenet poster
 
Posts: 3
Default EMC DS-16B2 fibre switch ogin issue

On Aug 2, 11:40 am, emcpa07 wrote:
Purchased a EMC DS-16B2 off Ebay. Everything works fine i.e., system
tests etc.. However before it performs its POST the switch loads
VxWorks then proceeds to Fabric OS v3.2.0a for which the "typical"
login: admin; passwd: password fails. Does anyone know a method of
reseting factory defaults?

Ron


Here is the output from my switch:

passed


First stage boot
g0= 0x00000202 g1= 0x00000000 g2= 0x00000000 g3= 0x00000000
g4= 0x00000000 g5= 0x00000000 g6= 0x00000000 g7= 0x00000000
uncompressing ROM to RAM
jumping to RAM at 0x10c00000










VxWorks System Boot


Copyright 1984-1994 Wind River Systems, Inc.





CPU: i960
Version: 5.3.1
BSP version: 1.0
Creation date: Mon Oct 29 12:18:55 PST 2001




Press any key to stop auto-boot...
4
3
2
1
0

auto-booting...


boot device : 1
processor number : 1
host name : mustang
file name : /config/all
inet on ethernet (e) : 10.77.77.77
host inet (h) : 10.77.77.71
gateway inet (g) : 0
user (u) : target
ftp password (pw) : '.'
flags (f) : 0x0
target name (tn) : host
other (o) : usr

Network interface 1 unknown.
Boot 0: booting from flash 0
Boot 0: 110336+6408
Boot 0: uncompressed - loading text and data
Boot 0: starting at 0x10030000...


Loading compressed image from flash...
Boot 0: booting from flash 0
Boot 0: 110336+6408
Boot 0: compressed
Boot 0: uncompressing 3155323 bytes from flash at 0xc005c858
Boot 0: jumping to RAM at 0x10400000

Network interface 1 unknown.

efwHookAdd: Added Ethernet Hook

Adding 12287 symbols for standalone.

Trace cleared
Model: 9
0x10392e40 (tSwitch): Jan 1 00:00:09
INFO SYS-BOOT, 4, Restart reason: Power-on




Fabric OS (tm) Release v3.2.0a

login: hpInit: Looking for Help Pages in Flash

Help Pages Info Start at 35edf9

Running System DRAM Test ...... passed.

Running Port Register Test .... passed.

Running Central Memory Test ... passed.

Running CMI Test .............. passed.

Running Turbo RAM Test ........ passed.

Running CAM Test .............. passed.

Running Statistics Cnt Test ... passed.

Running Frame Filter Test ..... passed.

Running Port Loopback Test .... passed.

Running Spin Silk ............. passed.
spinSilk ..... passed.
http: server initialized
nscam_init: Name Server Cache Mgr initialized
ns_init: Name Server initialized
as_init: Alias Server initialized [3.1 version]
ms_init: Management Server initialized
fdmi_init: FDMI initialized
sesd enabled
ps_init: Performance Server initialized
WARNING: envPS002 is below threshold with 0 (1 OK/0 FAULTY)
0x10348940 (tRASM): Jan 1 00:05:26
WARNING

  #3  
Old August 13th 07, 01:00 AM posted to comp.arch.storage
blazej
external usenet poster
 
Posts: 6
Default EMC DS-16B2 fibre switch ogin issue

emcpa07 wrote:
On Aug 2, 11:40 am, emcpa07 wrote:
Purchased a EMC DS-16B2 off Ebay. Everything works fine i.e., system
tests etc.. However before it performs its POST the switch loads
VxWorks then proceeds to Fabric OS v3.2.0a for which the "typical"
login: admin; passwd: password fails. Does anyone know a method of
reseting factory defaults?

Ron


Here is the output from my switch:

passed


First stage boot
g0= 0x00000202 g1= 0x00000000 g2= 0x00000000 g3= 0x00000000
g4= 0x00000000 g5= 0x00000000 g6= 0x00000000 g7= 0x00000000
uncompressing ROM to RAM
jumping to RAM at 0x10c00000










VxWorks System Boot


Copyright 1984-1994 Wind River Systems, Inc.





CPU: i960
Version: 5.3.1
BSP version: 1.0
Creation date: Mon Oct 29 12:18:55 PST 2001




Press any key to stop auto-boot...
4
3
2
1
0

auto-booting...


boot device : 1
processor number : 1
host name : mustang
file name : /config/all
inet on ethernet (e) : 10.77.77.77
host inet (h) : 10.77.77.71
gateway inet (g) : 0
user (u) : target
ftp password (pw) : '.'
flags (f) : 0x0
target name (tn) : host
other (o) : usr

Network interface 1 unknown.
Boot 0: booting from flash 0
Boot 0: 110336+6408
Boot 0: uncompressed - loading text and data
Boot 0: starting at 0x10030000...


Loading compressed image from flash...
Boot 0: booting from flash 0
Boot 0: 110336+6408
Boot 0: compressed
Boot 0: uncompressing 3155323 bytes from flash at 0xc005c858
Boot 0: jumping to RAM at 0x10400000

Network interface 1 unknown.

efwHookAdd: Added Ethernet Hook

Adding 12287 symbols for standalone.

Trace cleared
Model: 9
0x10392e40 (tSwitch): Jan 1 00:00:09
INFO SYS-BOOT, 4, Restart reason: Power-on




Fabric OS (tm) Release v3.2.0a

login: hpInit: Looking for Help Pages in Flash

Help Pages Info Start at 35edf9

Running System DRAM Test ...... passed.

Running Port Register Test .... passed.

Running Central Memory Test ... passed.

Running CMI Test .............. passed.

Running Turbo RAM Test ........ passed.

Running CAM Test .............. passed.

Running Statistics Cnt Test ... passed.

Running Frame Filter Test ..... passed.

Running Port Loopback Test .... passed.

Running Spin Silk ............. passed.
spinSilk ..... passed.
http: server initialized
nscam_init: Name Server Cache Mgr initialized
ns_init: Name Server initialized
as_init: Alias Server initialized [3.1 version]
ms_init: Management Server initialized
fdmi_init: FDMI initialized
sesd enabled
ps_init: Performance Server initialized
WARNING: envPS002 is below threshold with 0 (1 OK/0 FAULTY)
0x10348940 (tRASM): Jan 1 00:05:26
WARNING

send me please an e-mail to with OS version - I
will give you some stuff Wed (15th Aug)

Rgrds,
Blazej
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
HP B-Series Fibre Switch / Brocade 3200 Will Compaq Servers 2 February 10th 07 01:40 AM
Silent fibre channel switch mgiammarco Storage & Hardrives 3 December 30th 06 04:46 PM
FA:DELL POWERVAULT 56F 16 PORT (OPTICAL) FIBRE CHANNEL SWITCH [email protected] Storage & Hardrives 0 September 12th 05 05:07 PM
KVM switch issue Neal General 4 May 27th 05 09:43 PM
Hooking up a Compaq Storage System U2 to a scsi-fibre switch Mike Ault General Hardware 0 April 1st 04 06:01 PM


All times are GMT +1. The time now is 07:00 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.