If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
no power - help
I went to add some more memory to one of my PCs today, trying some
extra memory chip not knowing what kinds they were...the first one worked fine but I found out it was on 16mb, so I turned everything off, and installed the next one figuring it would more than likely be at least a 64, but when I went to turn the machine back on, nothing happened. No beep, no light comes on, nothing. When I flip the switch on the power supply itself, the fans come on for a few seconds and then stop. I switched the power supply with another that I *think* is still good, and had the same results. I've checked every connection, but can't imagine what went wrong. Could I have 2 bad power supplies that just happened to go bad as I was installing a memory card? Did I screw something up somehow? I'm not even sure what to look for at this point. Greg |
#2
|
|||
|
|||
NOT a good idea to randomly install unknown RAM ...
-- DaveW "fear" wrote in message m... I went to add some more memory to one of my PCs today, trying some extra memory chip not knowing what kinds they were...the first one worked fine but I found out it was on 16mb, so I turned everything off, and installed the next one figuring it would more than likely be at least a 64, but when I went to turn the machine back on, nothing happened. No beep, no light comes on, nothing. When I flip the switch on the power supply itself, the fans come on for a few seconds and then stop. I switched the power supply with another that I *think* is still good, and had the same results. I've checked every connection, but can't imagine what went wrong. Could I have 2 bad power supplies that just happened to go bad as I was installing a memory card? Did I screw something up somehow? I'm not even sure what to look for at this point. Greg |
#3
|
|||
|
|||
"fear" wrote in message m... I went to add some more memory to one of my PCs today, trying some extra memory chip not knowing what kinds they were...the first one worked fine but I found out it was on 16mb, so I turned everything off, and installed the next one figuring it would more than likely be at least a 64, but when I went to turn the machine back on, nothing happened. No beep, no light comes on, nothing. When I flip the switch on the power supply itself, the fans come on for a few seconds and then stop. I switched the power supply with another that I *think* is still good, and had the same results. I've checked every connection, but can't imagine what went wrong. Could I have 2 bad power supplies that just happened to go bad as I was installing a memory card? Did I screw something up somehow? I'm not even sure what to look for at this point. Greg It is possible you fried the motherboard by an ESD (electro static discharge). Were you conscious of this common problem occuring? If not, you may have had this happen to you. A few years ago I fried one of the computers at work this way, accidentally, of course. But a small static discharge to the MB could kill it if you don't take precautions. And even if you do take precautions sometimes an accident can occur. John |
#4
|
|||
|
|||
|
#5
|
|||
|
|||
Is it possible that the RAM card itself is either causing it to not
start, or that it did some kind of damage to the MB? "DaveW" wrote in message news:yT_Ob.102340$xy6.197084@attbi_s02... NOT a good idea to randomly install unknown RAM ... -- DaveW "fear" wrote in message m... I went to add some more memory to one of my PCs today, trying some extra memory chip not knowing what kinds they were...the first one worked fine but I found out it was on 16mb, so I turned everything off, and installed the next one figuring it would more than likely be at least a 64, but when I went to turn the machine back on, nothing happened. No beep, no light comes on, nothing. When I flip the switch on the power supply itself, the fans come on for a few seconds and then stop. I switched the power supply with another that I *think* is still good, and had the same results. I've checked every connection, but can't imagine what went wrong. Could I have 2 bad power supplies that just happened to go bad as I was installing a memory card? Did I screw something up somehow? I'm not even sure what to look for at this point. Greg |
#7
|
|||
|
|||
fear wrote:
Also I forgot to mention, I tried, just for fun, putting the first power supply back in, and got the same results, but when I then turned that switch off, I heard a 'pop' and some smoke came out of the power supply box When the PS "popped" it could have wiped out the ram, mb, cpu and anything connected to the buses. You need a know good complete system with like hardware to test each part one at a time. charles..... (Aaron) wrote in message . com... (fear) wrote in message om... I went to add some more memory to one of my PCs today, trying some extra memory chip not knowing what kinds they were...the first one worked fine but I found out it was on 16mb, so I turned everything off, and installed the next one figuring it would more than likely be at least a 64, but when I went to turn the machine back on, nothing happened. No beep, no light comes on, nothing. When I flip the switch on the power supply itself, the fans come on for a few seconds and then stop. I switched the power supply with another that I *think* is still good, and had the same results. I've checked every connection, but can't imagine what went wrong. Could I have 2 bad power supplies that just happened to go bad as I was installing a memory card? Did I screw something up somehow? I'm not even sure what to look for at this point. Greg I believe my friend had a problem similar to this before. It turned out his motherboard was shorting to the case, through the screw attachment points. I guess he had to get some plastic washers to isolate it. Not sure why changing memory modules would cause this to come around though. I'm hesitant to say this is the cause, but maybe something similar, because his fan would only run for a few seconds also. Aaron |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dead computer? | Patty | Homebuilt PC's | 63 | February 4th 05 08:06 AM |
GW Power Supply Feedback | RDBrimmer | Gateway Computers | 0 | October 20th 04 07:26 AM |
PSU Fans | Muttly | General | 16 | February 13th 04 10:42 PM |
Won't Power Up after Power Outage | Greg Lovern | Homebuilt PC's | 7 | February 8th 04 01:47 PM |
Happy Birthday America | SST | Overclocking AMD Processors | 326 | November 27th 03 07:54 PM |