If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Music PC
Hello,
my PC needs an upgrade, and since my harddisk died yesterday, this is the moment. At the moment i've got a Celeron 500, which i build my self years ago, and it worked great. Now i want to build a AMD athlon XP based system. I'm a student, so the amd 64 is too expensive for me.... I can get a cheap amd athlon xp 2600+ (333 fsb) processor, and i have read good reviews about it....but my problem is which motherboard to choose. I was thinking of a Asus a7n8x (deluxe)...with the nForce2 chipset. Now i got some questions: - Does anyone have suggestions or alternatives? I use mu PC for normal work, but especially for recording my own music (!) Are the VIA chipsets worse? - Is it worth it to buy dual channel memory, or is it almost senseless with an amd system (keep in mind that i use it for a lot of recording and playing (realtim) so called softsynths. That means that i need a very low latency time etc.) Or do you prefer to buy one single memory-chip.. instead of two and use it as dual channel? - Same question for serial ata. I read most of the time people don't notice the difference. But does it have benefits with recording music an stuff?? If not i can safe a few bucks.... thanks for all your reactions.. David |
#2
|
|||
|
|||
|
#3
|
|||
|
|||
|
#4
|
|||
|
|||
DEf:
- Does anyone have suggestions or alternatives? Some good recommendations he http://arstechnica.com/guides/buyer/...09-21-2004.ars -- Mac Cool |
#5
|
|||
|
|||
Ok thanks for your replies...now i've got still 2 questions about the
memory: - Can you notice the difference between cl2.5 en cl2 memory ? - Since i've bought a athlon xp 2600 on 333 fsb, do i have to buy pc2700 memory? 'Cause pc3200 memory costs the same? But i've heard that the performance only decreases when you run pc3200 on a 333 fsb....is that correct? What do you advice ? Thanks again.. David Theres a cheaper board by Chaintech for around $50, with that combo and the 2500 barton and their fan its 135 or so. But I did see a few posts about some problems with the board a few months ago. If you check the consumer feedback at newegg its very good now though. However -- I dont see as many posts about at NforcersHQ forum - a website where they talk about nforce boards and other stuff. I see lots more stuff on the ASUS since its more popular which may be valuable if you have problems. Id probably buy the chaintech if I was puttign together a system for someone who wanted to save money but in your case doing music --- itll probably be OK but I of course you never know if there will be any issues with a music card or whatever and the ASUS is a more popular board. You can get the barton 2500 and easily just set your FSB to 200 and the barton becomes a 3200 , everyone seems to be doing it. Im doing it on my PC. I saw a blurb that said Outpost was selling Kingston mem DDR 400/3200 for $56 /512 megs probably after rebate. Thats what Im using with no problems on an ASUS deluxe board. |
#6
|
|||
|
|||
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Noises during playing some music | Markus Gärtner | General | 4 | March 21st 04 02:30 AM |
Music reviews webpage - what software? | Kwaj | General | 1 | February 7th 04 02:15 AM |
REQ: Why am getting skips when copying music CD? | [email protected] | General | 2 | December 4th 03 05:59 PM |
Playing music through the PC speaker | Charlie the Choo-Choo | General | 5 | November 19th 03 07:27 AM |
music in Audigy 2 setup calibrator | FuzionMan | General | 0 | September 19th 03 04:28 AM |