If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Using Cover Designer for direct disc printing with a Canon Pixma ip7250.
I have used Cover Designer with many Canon Printers over the years to print
CDs and DVDs using the inserted tray with great success. My last printer, a Pixma ip4950 has had to be replaced and I have just bought a Pixma ip7250. I have found that I cannot select the CD tray in the source dropdown in the setup, as I could with previous models. It only shows 'cassette' with no other option and consequently prints only on paper. I have managed to access the tray using Canon's own supplied CD printing program, but this is hopeless, as it does not allow the printing to go near the centre for full face printing. It leaves a large white unprinted space around the centre. I have lots of Cover Designer files I need to be able to print from, but now find I can't. I did find the tray settings for the printer from another source who seemed to have been successful in printing CDs etc. Unfortunately I can't find that link now. Has anyone been successful in direct disc printing on the ip7250 and if so, HOW? Are there any other programs that will definitely print on the CD tray and print full face discs? Thanks in anticipation. |
#2
|
|||
|
|||
Using Cover Designer for direct disc printing with a Canon Pixma ip7250.
"John B" writes:
I have used Cover Designer with many Canon Printers over the years to print CDs and DVDs using the inserted tray with great success. My last printer, a Pixma ip4950 has had to be replaced and I have just bought a Pixma ip7250. I have found that I cannot select the CD tray in the source dropdown in the setup, as I could with previous models. It only shows 'cassette' with no other option and consequently prints only on paper. I have managed to access the tray using Canon's own supplied CD printing program, but this is hopeless, as it does not allow the printing to go near the centre for full face printing. It leaves a large white unprinted space around the centre. I have lots of Cover Designer files I need to be able to print from, but now find I can't. I did find the tray settings for the printer from another source who seemed to have been successful in printing CDs etc. Unfortunately I can't find that link now. Has anyone been successful in direct disc printing on the ip7250 and if so, HOW? Are there any other programs that will definitely print on the CD tray and print full face discs? Thanks in anticipation. Hello John, No reply from you on the other thread you started, so here I write you the same infor in short form. Same tray used in: MX920 family iP7200 family (of which you have the iP7250) MG5400 family MG6300 family MG6500 family Hence, see if your software has CD support for printers/all-in-ones from the above families. Cheers, Gernot -- NNTP on Emacs 24.3 from Windows 7 |
#3
|
|||
|
|||
Using Cover Designer for direct disc printing with a Canon Pixma ip7250.
"Gernot Hassenpflug" wrote in message ... "John B" writes: I have used Cover Designer with many Canon Printers over the years to CDs and DVDs using the inserted tray with great success. My last printer, a Pixma ip4950 has had to be replaced and I have just bought a Pixma ip7250. I have found that I cannot select the CD tray in the source dropdown in the setup, as I could with previous models. It only shows 'cassette' with no other option and consequently prints only on paper. I have managed to access the tray using Canon's own supplied CD printing program, but this is hopeless, as it does not allow the printing to go near the centre for full face printing. It leaves a large white unprinted space around the centre. I have lots of Cover Designer files I need to be able to print from, but now find I can't. I did find the tray settings for the printer from another source who seemed to have been successful in printing CDs etc. Unfortunately I can't find that link now. Has anyone been successful in direct disc printing on the ip7250 and if so, HOW? Are there any other programs that will definitely print on the CD tray and print full face discs? Thanks in anticipation. I've solved it! I'd missed out one of the stages in the setup process to access the tray. Because I hadn't had to do that for the last four years since the last setup from new, I had forgotten it needed doing. My fault - sorry! Everything now working. Thanks Hello John, No reply from you on the other thread you started, so here I write you the same infor in short form. Same tray used in: MX920 family iP7200 family (of which you have the iP7250) MG5400 family MG6300 family MG6500 family Hence, see if your software has CD support for printers/all-in-ones from the above families. Cheers, Gernot -- NNTP on Emacs 24.3 from Windows 7 |
#4
|
|||
|
|||
Using Cover Designer for direct disc printing with a Canon Pixma ip7250.
"John B" writes:
"Gernot Hassenpflug" wrote in message ... "John B" writes: I have used Cover Designer with many Canon Printers over the years to print CDs and DVDs using the inserted tray with great success. My last printer, a Pixma ip4950 has had to be replaced and I have just bought a Pixma ip7250. I have found that I cannot select the CD tray in the source dropdown in the setup, as I could with previous models. It only shows 'cassette' with no other option and consequently prints only on paper. /../ I've solved it! I'd missed out one of the stages in the setup process to access the tray. Because I hadn't had to do that for the last four years since the last setup from new, I had forgotten it needed doing. My fault - sorry! Everything now working. Thanks Glad to hear it worked out fine! Cheers, Gernot -- NNTP on Emacs 24.3 from Windows 7 |
#5
|
|||
|
|||
Using Cover Designer for direct disc printing with a Canon Pixma ip7250.
Hello John,
Am Montag, 23. Februar 2015 15:07:26 UTC+1 schrieb John B: I've solved it! I'd missed out one of the stages in the setup process to access the tray. Because I hadn't had to do that for the last four years since the last setup from new, I had forgotten it needed doing. My fault - sorry! Everything now working. Thanks I do have the same printer and issues with printing cds. I also am not able to see the option in the printing dialogue. You mentioned a setup process to be used. I did not find anything valuable (at least applicable for linux). Can you please point me in the right direction or write what you hat to du? Thanks a lot Christian |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Settings for printing DVDs on ip720 using Nero Cover Designer | John B[_6_] | Printers | 3 | February 23rd 15 02:06 PM |
Speed up Canon IP4500? / printer for direct to disc printingsuggestion? | Argo22 | Printers | 3 | August 12th 08 09:58 PM |
Nero 7 Cover Designer | [email protected] | Cdr | 0 | March 28th 06 03:41 PM |
Nero Cover Designer help please | Stuart Reed | Cdr | 1 | January 9th 06 07:38 AM |
Nero cover designer | Fitz | Cdr | 2 | February 11th 05 09:49 PM |