Presario 1800 reformat/update?

I don't think Simple File Sharing applies if you are running Fat32. Hmmm.
Terry

"Whelan" wrote in message
...
SEQUOIA is just the Workgroup name ... it's one of several I've tried. But
it's always the same, the Compaq can't get beyond the workgroup's name.

I've started reading the articles you linked to ... I notice references to
NTFS file system.
I just realized that this Compaq uses FAT32 instead of NTFS. Could that be
a
problem? (But then so does the 1998 Gateway laptop, and it can share
anything.) Both the Dells have NTFS on their C partition.
Nan
Back to those articles.

"tc" wrote in message
news:[email protected]...
What is SEQUOIA? Is this another computer on your network?
Terry

"Whelan" wrote in message
...
The File and Printer Sharing for Microsoft Networks box is checked
too.
Its
Install button offers the same 3 choices: Client, Service, and
Protocol.
The Compaq laptop's name is COMPAQ.

When I choose View Workgroup Computers from the Dells, Compaq appears
on
the
list, but when I click on it I get:
"\\Compaq is not accessible. You might not have permission to use this
network resource. Contact the administrator of the server to find out
if
you
have access permissions. The network path was not found. "

When I choose View Workgroup Computers from the Compaq, I get the
hourglass
for 20 seconds, then:
"SEQUOIA is not accessible. You might not have permission to use this
network resource. Contact the administrator of the server to find out
if
you
have access permissions. The list of servers for this workgroup is not
currently available."

Hmm, the final sentence is different. I've changed the workgroup name
several times, but no result.
Nan

"Thagor" wrote in message
y.com...
Do you see "File/Print sharing in that group? If not, install it and
put
a
check in the box. Then lets see what you have. Also recheck the NAME
of
the
Laptop and make sure it is recognized properly.


"Whelan" wrote in message
...
You asked "Can your router give you a list of the
computers by name and ip address?"
I don't know how to look at or communicate with the router. (Maybe
it's
in
the router manual.)

Re Optional Network Components,
I see something similar under Local Area Connection, View Status,
Properties. When highlighting either "Client for Microsoft
Networks"
or
"Internet Protocol TCP/IP", there's a button you can click called
Install.
Clicking it gives you three choices: Client, Service, or Protocol.
(I
saw
these Saturday but didn't think any of them applied.)
Client lets you add Client Service for Netware. Service lets you
add
Service
Advertising Protocol. Protocol lets you add Microsoft IPv6
Developer
Edition, Network Monitor Driver or NWLink IPX/SPX/NetBIOS
Compatible
Transport Protocol.
Are any of those worth adding?

The computers appear the same in these settings.
Nan

"tc" wrote in message
news:[email protected]...
The 'can't ping by name' sounds significant. You haven't got 2
computers
with the same name by any chance? Can your router give you a
list
of
the
computers by name and ip address?
Terry

"Whelan" wrote in message
...
Some helpful people, Angus for one, suggested many things to
try.
The firewall is off.
I've standardized the login and workgroup names (tried 3
different
workgroup
names actually, with many reboots).

I have connected to the router (at times): a Dell 4500
desktop,
a
Gateway
Solo 2500 (a 1998 model), a new Dell 8500 laptop and the
Presario
1800.
They
all have XPPro except the Gateway has 98se. They can all see
each
others'
shared folders etc except the Compaq -- it can't see past the
workgroup
name.

Angus told me how to "ping": They can ping each other by name
and
IP
address, except the Compaq can only ping or be pinged by IP
address.

The TCP/IP settings are the same on all (except the last 2
digits
of
the
addresses).

What are the "optional windows components? eg: the networks
add-ons"
that
Trai' mentions? Will I find them on the XP installation CD?
That might be worth a try!
Nan

"tc" wrote in message
news:[email protected]...
Also ensure the workgroup name is the same as any other
computer
on
your
home network.
Terry

"tc" wrote in message
news:[email protected]...
It seems to me, if you can access the internet, you should
be
able
to
access
your network. Assuming you are using a router and the
other
machines
are
networking with tcp/ip, what would the difference be?
Check
to
make
sure
your XP firewall is turned off.
Terry

"Whelan" wrote in message
...
I've just been handed down my son's Compaq Presario 1800
laptop.
(I
bought
him a replacement.)

This Presario has never been able to tap into our home
network
for
printing
or file sharing (since I installed Win XPPro on it
summer
2002.
However
it
can use DSL through our router. This last week I have
tried
furiously
to
solve the networking problem, with lots of advice on the
Dell
message
boards, but nothing works.

It looks like I will have to reformat the hard drive and
reinstall
Win
XPPro
to have any hope of networking it.

Has anyone made a fresh start on a a Presario 1800 with
XP?
Was
it
difficult
to find drivers etc to make it work? I'm not finding
what
I
need,
so
far,
on
the web site; it only lists Win Me and 2000.

(We did purchase an extended warranty in July 2001...
Any
chance
Compaq
would provide support of the type I need by phone?)

Nan














---

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.558 / Virus Database: 350 - Release Date: 1/2/2004

You did confirm that 'Obtain DNS Server address automatically' was checked,
didn't you?
Terry

"tc" wrote in message
news:[email protected]...
I don't think Simple File Sharing applies if you are running Fat32. Hmmm.
Terry

"Whelan" wrote in message
...
SEQUOIA is just the Workgroup name ... it's one of several I've tried.
But
it's always the same, the Compaq can't get beyond the workgroup's name.

I've started reading the articles you linked to ... I notice references
to
NTFS file system.
I just realized that this Compaq uses FAT32 instead of NTFS. Could that
be
a
problem? (But then so does the 1998 Gateway laptop, and it can share
anything.) Both the Dells have NTFS on their C partition.
Nan
Back to those articles.

"tc" wrote in message
news:[email protected]...
What is SEQUOIA? Is this another computer on your network?
Terry

"Whelan" wrote in message
...
The File and Printer Sharing for Microsoft Networks box is checked
too.
Its
Install button offers the same 3 choices: Client, Service, and
Protocol.
The Compaq laptop's name is COMPAQ.

When I choose View Workgroup Computers from the Dells, Compaq
appears
on
the
list, but when I click on it I get:
"\\Compaq is not accessible. You might not have permission to use
this
network resource. Contact the administrator of the server to find
out
if
you
have access permissions. The network path was not found. "

When I choose View Workgroup Computers from the Compaq, I get the
hourglass
for 20 seconds, then:
"SEQUOIA is not accessible. You might not have permission to use
this
network resource. Contact the administrator of the server to find
out
if
you
have access permissions. The list of servers for this workgroup is
not
currently available."

Hmm, the final sentence is different. I've changed the workgroup
name
several times, but no result.
Nan

"Thagor" wrote in message
y.com...
Do you see "File/Print sharing in that group? If not, install it
and
put
a
check in the box. Then lets see what you have. Also recheck the
NAME
of
the
Laptop and make sure it is recognized properly.


"Whelan" wrote in message
...
You asked "Can your router give you a list of the
computers by name and ip address?"
I don't know how to look at or communicate with the router.
(Maybe
it's
in
the router manual.)

Re Optional Network Components,
I see something similar under Local Area Connection, View
Status,
Properties. When highlighting either "Client for Microsoft
Networks"
or
"Internet Protocol TCP/IP", there's a button you can click
called
Install.
Clicking it gives you three choices: Client, Service, or
Protocol.
(I
saw
these Saturday but didn't think any of them applied.)
Client lets you add Client Service for Netware. Service lets you
add
Service
Advertising Protocol. Protocol lets you add Microsoft IPv6
Developer
Edition, Network Monitor Driver or NWLink IPX/SPX/NetBIOS
Compatible
Transport Protocol.
Are any of those worth adding?

The computers appear the same in these settings.
Nan

"tc" wrote in message
news:[email protected]...
The 'can't ping by name' sounds significant. You haven't got 2
computers
with the same name by any chance? Can your router give you a
list
of
the
computers by name and ip address?
Terry

"Whelan" wrote in message
...
Some helpful people, Angus for one, suggested many things to
try.
The firewall is off.
I've standardized the login and workgroup names (tried 3
different
workgroup
names actually, with many reboots).

I have connected to the router (at times): a Dell 4500
desktop,
a
Gateway
Solo 2500 (a 1998 model), a new Dell 8500 laptop and the
Presario
1800.
They
all have XPPro except the Gateway has 98se. They can all see
each
others'
shared folders etc except the Compaq -- it can't see past
the
workgroup
name.

Angus told me how to "ping": They can ping each other by
name
and
IP
address, except the Compaq can only ping or be pinged by IP
address.

The TCP/IP settings are the same on all (except the last 2
digits
of
the
addresses).

What are the "optional windows components? eg: the networks
add-ons"
that
Trai' mentions? Will I find them on the XP installation CD?
That might be worth a try!
Nan

"tc" wrote in message
news:[email protected]...
Also ensure the workgroup name is the same as any other
computer
on
your
home network.
Terry

"tc" wrote in message
news:[email protected]...
It seems to me, if you can access the internet, you
should
be
able
to
access
your network. Assuming you are using a router and the
other
machines
are
networking with tcp/ip, what would the difference be?
Check
to
make
sure
your XP firewall is turned off.
Terry

"Whelan" wrote in message
...
I've just been handed down my son's Compaq Presario
1800
laptop.
(I
bought
him a replacement.)

This Presario has never been able to tap into our home
network
for
printing
or file sharing (since I installed Win XPPro on it
summer
2002.
However
it
can use DSL through our router. This last week I have
tried
furiously
to
solve the networking problem, with lots of advice on
the
Dell
message
boards, but nothing works.

It looks like I will have to reformat the hard drive
and
reinstall
Win
XPPro
to have any hope of networking it.

Has anyone made a fresh start on a a Presario 1800
with
XP?
Was
it
difficult
to find drivers etc to make it work? I'm not finding
what
I
need,
so
far,
on
the web site; it only lists Win Me and 2000.

(We did purchase an extended warranty in July 2001...
Any
chance
Compaq
would provide support of the type I need by phone?)

Nan














---

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.558 / Virus Database: 350 - Release Date: 1/2/2004

I'm not sure about that ... but most shared folders (music, photos, docs)
are on the FAT32 partitions. And the old Gateway (FAT32) can tap into
everything.

My main concern is that I'd like to be able to PRINT.
Nan

"Trai' La Trash" wrote in message
...
You do know NTFS can read Fat32 but Fat32 can't see NTFS right?

"just checking the obvious that's all"

Dave
"Whelan" wrote in message
...
SEQUOIA is just the Workgroup name ... it's one of several I've tried.
But
it's always the same, the Compaq can't get beyond the workgroup's name.

I've started reading the articles you linked to ... I notice references
to
NTFS file system.
I just realized that this Compaq uses FAT32 instead of NTFS. Could that
be
a
problem? (But then so does the 1998 Gateway laptop, and it can share
anything.) Both the Dells have NTFS on their C partition.
Nan
Back to those articles.

"tc" wrote in message
news:[email protected]...
What is SEQUOIA? Is this another computer on your network?
Terry

"Whelan" wrote in message
...
The File and Printer Sharing for Microsoft Networks box is checked
too.
Its
Install button offers the same 3 choices: Client, Service, and
Protocol.
The Compaq laptop's name is COMPAQ.

When I choose View Workgroup Computers from the Dells, Compaq
appears
on
the
list, but when I click on it I get:
"\\Compaq is not accessible. You might not have permission to use
this
network resource. Contact the administrator of the server to find
out
if
you
have access permissions. The network path was not found. "

When I choose View Workgroup Computers from the Compaq, I get the
hourglass
for 20 seconds, then:
"SEQUOIA is not accessible. You might not have permission to use
this
network resource. Contact the administrator of the server to find
out
if
you
have access permissions. The list of servers for this workgroup is
not
currently available."

Hmm, the final sentence is different. I've changed the workgroup
name
several times, but no result.
Nan

"Thagor" wrote in message
y.com...
Do you see "File/Print sharing in that group? If not, install it
and
put
a
check in the box. Then lets see what you have. Also recheck the
NAME
of
the
Laptop and make sure it is recognized properly.


"Whelan" wrote in message
...
You asked "Can your router give you a list of the
computers by name and ip address?"
I don't know how to look at or communicate with the router.
(Maybe
it's
in
the router manual.)

Re Optional Network Components,
I see something similar under Local Area Connection, View
Status,
Properties. When highlighting either "Client for Microsoft
Networks"
or
"Internet Protocol TCP/IP", there's a button you can click
called
Install.
Clicking it gives you three choices: Client, Service, or
Protocol.
(I
saw
these Saturday but didn't think any of them applied.)
Client lets you add Client Service for Netware. Service lets you
add
Service
Advertising Protocol. Protocol lets you add Microsoft IPv6
Developer
Edition, Network Monitor Driver or NWLink IPX/SPX/NetBIOS
Compatible
Transport Protocol.
Are any of those worth adding?

The computers appear the same in these settings.
Nan

"tc" wrote in message
news:[email protected]...
The 'can't ping by name' sounds significant. You haven't got 2
computers
with the same name by any chance? Can your router give you a
list
of
the
computers by name and ip address?
Terry

"Whelan" wrote in message
...
Some helpful people, Angus for one, suggested many things to
try.
The firewall is off.
I've standardized the login and workgroup names (tried 3
different
workgroup
names actually, with many reboots).

I have connected to the router (at times): a Dell 4500
desktop,
a
Gateway
Solo 2500 (a 1998 model), a new Dell 8500 laptop and the
Presario
1800.
They
all have XPPro except the Gateway has 98se. They can all see
each
others'
shared folders etc except the Compaq -- it can't see past
the
workgroup
name.

Angus told me how to "ping": They can ping each other by
name
and
IP
address, except the Compaq can only ping or be pinged by IP
address.

The TCP/IP settings are the same on all (except the last 2
digits
of
the
addresses).

What are the "optional windows components? eg: the networks
add-ons"
that
Trai' mentions? Will I find them on the XP installation CD?
That might be worth a try!
Nan

"tc" wrote in message
news:[email protected]...
Also ensure the workgroup name is the same as any other
computer
on
your
home network.
Terry

"tc" wrote in message
news:[email protected]...
It seems to me, if you can access the internet, you
should
be
able
to
access
your network. Assuming you are using a router and the
other
machines
are
networking with tcp/ip, what would the difference be?
Check
to
make
sure
your XP firewall is turned off.
Terry

"Whelan" wrote in message
...
I've just been handed down my son's Compaq Presario
1800
laptop.
(I
bought
him a replacement.)

This Presario has never been able to tap into our home
network
for
printing
or file sharing (since I installed Win XPPro on it
summer
2002.
However
it
can use DSL through our router. This last week I have
tried
furiously
to
solve the networking problem, with lots of advice on
the
Dell
message
boards, but nothing works.

It looks like I will have to reformat the hard drive
and
reinstall
Win
XPPro
to have any hope of networking it.

Has anyone made a fresh start on a a Presario 1800
with
XP?
Was
it
difficult
to find drivers etc to make it work? I'm not finding
what
I
need,
so
far,
on
the web site; it only lists Win Me and 2000.

(We did purchase an extended warranty in July 2001...
Any
chance
Compaq
would provide support of the type I need by phone?)

Nan














---

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.558 / Virus Database: 350 - Release Date: 1/2/2004

Yep, 'Obtain DNS Server address automatically' is checked everywhere.

I've been reading the Belkin manual and I went to the router by running
192.168.2.1 and found MAC addresses. And from some tips there about "adding
computer" I was able to get the compaq's wireless card to see the router and
it can connect to the internet. That added an additional IP address for the
Compaq.

But both ways, the Compaq can only ping with the others by IP addresses, not
name. A microsoft troubleshooter said the computer name might be a
duplicate, so I changed it to PRESARIO. Now both names get listed but
neither is accessible.

I'm very happy to have wireless internet access on the Compaq now. I can
probably share most files by a USB drive.
I just wish I could print!
Nan


"tc" wrote in message
news:[email protected]...
You did confirm that 'Obtain DNS Server address automatically' was
checked,
didn't you?
Terry

"tc" wrote in message
news:[email protected]...
I don't think Simple File Sharing applies if you are running Fat32.
Hmmm.
Terry

"Whelan" wrote in message
...
SEQUOIA is just the Workgroup name ... it's one of several I've tried.
But
it's always the same, the Compaq can't get beyond the workgroup's
name.

I've started reading the articles you linked to ... I notice
references
to
NTFS file system.
I just realized that this Compaq uses FAT32 instead of NTFS. Could
that
be
a
problem? (But then so does the 1998 Gateway laptop, and it can share
anything.) Both the Dells have NTFS on their C partition.
Nan
Back to those articles.

"tc" wrote in message
news:[email protected]...
What is SEQUOIA? Is this another computer on your network?
Terry

"Whelan" wrote in message
...
The File and Printer Sharing for Microsoft Networks box is checked
too.
Its
Install button offers the same 3 choices: Client, Service, and
Protocol.
The Compaq laptop's name is COMPAQ.

When I choose View Workgroup Computers from the Dells, Compaq
appears
on
the
list, but when I click on it I get:
"\\Compaq is not accessible. You might not have permission to use
this
network resource. Contact the administrator of the server to find
out
if
you
have access permissions. The network path was not found. "

When I choose View Workgroup Computers from the Compaq, I get the
hourglass
for 20 seconds, then:
"SEQUOIA is not accessible. You might not have permission to use
this
network resource. Contact the administrator of the server to find
out
if
you
have access permissions. The list of servers for this workgroup is
not
currently available."

Hmm, the final sentence is different. I've changed the workgroup
name
several times, but no result.
Nan

"Thagor" wrote in message
y.com...
Do you see "File/Print sharing in that group? If not, install it
and
put
a
check in the box. Then lets see what you have. Also recheck the
NAME
of
the
Laptop and make sure it is recognized properly.


"Whelan" wrote in message
...
You asked "Can your router give you a list of the
computers by name and ip address?"
I don't know how to look at or communicate with the router.
(Maybe
it's
in
the router manual.)

Re Optional Network Components,
I see something similar under Local Area Connection, View
Status,
Properties. When highlighting either "Client for Microsoft
Networks"
or
"Internet Protocol TCP/IP", there's a button you can click
called
Install.
Clicking it gives you three choices: Client, Service, or
Protocol.
(I
saw
these Saturday but didn't think any of them applied.)
Client lets you add Client Service for Netware. Service lets
you
add
Service
Advertising Protocol. Protocol lets you add Microsoft IPv6
Developer
Edition, Network Monitor Driver or NWLink IPX/SPX/NetBIOS
Compatible
Transport Protocol.
Are any of those worth adding?

The computers appear the same in these settings.
Nan

"tc" wrote in message
news:[email protected]...
The 'can't ping by name' sounds significant. You haven't got
2
computers
with the same name by any chance? Can your router give you a
list
of
the
computers by name and ip address?
Terry

"Whelan" wrote in message
...
Some helpful people, Angus for one, suggested many things
to
try.
The firewall is off.
I've standardized the login and workgroup names (tried 3
different
workgroup
names actually, with many reboots).

I have connected to the router (at times): a Dell 4500
desktop,
a
Gateway
Solo 2500 (a 1998 model), a new Dell 8500 laptop and the
Presario
1800.
They
all have XPPro except the Gateway has 98se. They can all
see
each
others'
shared folders etc except the Compaq -- it can't see past
the
workgroup
name.

Angus told me how to "ping": They can ping each other by
name
and
IP
address, except the Compaq can only ping or be pinged by
IP
address.

The TCP/IP settings are the same on all (except the last 2
digits
of
the
addresses).

What are the "optional windows components? eg: the
networks
add-ons"
that
Trai' mentions? Will I find them on the XP installation
CD?
That might be worth a try!
Nan

"tc" wrote in message
news:[email protected]...
Also ensure the workgroup name is the same as any other
computer
on
your
home network.
Terry

"tc" wrote in message
news:[email protected]...
It seems to me, if you can access the internet, you
should
be
able
to
access
your network. Assuming you are using a router and the
other
machines
are
networking with tcp/ip, what would the difference be?
Check
to
make
sure
your XP firewall is turned off.
Terry

"Whelan" wrote in message
...
I've just been handed down my son's Compaq Presario
1800
laptop.
(I
bought
him a replacement.)

This Presario has never been able to tap into our
home
network
for
printing
or file sharing (since I installed Win XPPro on it
summer
2002.
However
it
can use DSL through our router. This last week I
have
tried
furiously
to
solve the networking problem, with lots of advice on
the
Dell
message
boards, but nothing works.

It looks like I will have to reformat the hard drive
and
reinstall
Win
XPPro
to have any hope of networking it.

Has anyone made a fresh start on a a Presario 1800
with
XP?
Was
it
difficult
to find drivers etc to make it work? I'm not finding
what
I
need,
so
far,
on
the web site; it only lists Win Me and 2000.

(We did purchase an extended warranty in July
2001...
Any
chance
Compaq
would provide support of the type I need by phone?)

Nan














---

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.558 / Virus Database: 350 - Release Date: 1/2/2004

Both names are listed because the Netgear router didn't update its database
to remove the old name. The only problem with duplicate names applies to you
having 2 or more computers on the same network with the same name. If you
look at the list of names on the router, you will be able to tell if any are
duplicated.

You can add a printer to an xp machine from Control Panel - Printers and
other hardware. Assuming you have the printer attached to another computer,
you would choose Network Printer. If the wizard can find it, it will give
you the appropriate directions to add it to the Compaq. I have no idea
whether this will work as you can't share files. But its worth a try.
Terry

"Whelan" wrote in message
...
Yep, 'Obtain DNS Server address automatically' is checked everywhere.

I've been reading the Belkin manual and I went to the router by running
192.168.2.1 and found MAC addresses. And from some tips there about
"adding
computer" I was able to get the compaq's wireless card to see the router
and
it can connect to the internet. That added an additional IP address for
the
Compaq.

But both ways, the Compaq can only ping with the others by IP addresses,
not
name. A microsoft troubleshooter said the computer name might be a
duplicate, so I changed it to PRESARIO. Now both names get listed but
neither is accessible.

I'm very happy to have wireless internet access on the Compaq now. I can
probably share most files by a USB drive.
I just wish I could print!
Nan


"tc" wrote in message
news:[email protected]...
You did confirm that 'Obtain DNS Server address automatically' was
checked,
didn't you?
Terry

"tc" wrote in message
news:[email protected]...
I don't think Simple File Sharing applies if you are running Fat32.
Hmmm.
Terry

"Whelan" wrote in message
...
SEQUOIA is just the Workgroup name ... it's one of several I've
tried.
But
it's always the same, the Compaq can't get beyond the workgroup's
name.

I've started reading the articles you linked to ... I notice
references
to
NTFS file system.
I just realized that this Compaq uses FAT32 instead of NTFS. Could
that
be
a
problem? (But then so does the 1998 Gateway laptop, and it can share
anything.) Both the Dells have NTFS on their C partition.
Nan
Back to those articles.

"tc" wrote in message
news:[email protected]...
What is SEQUOIA? Is this another computer on your network?
Terry

"Whelan" wrote in message
...
The File and Printer Sharing for Microsoft Networks box is
checked
too.
Its
Install button offers the same 3 choices: Client, Service, and
Protocol.
The Compaq laptop's name is COMPAQ.

When I choose View Workgroup Computers from the Dells, Compaq
appears
on
the
list, but when I click on it I get:
"\\Compaq is not accessible. You might not have permission to
use
this
network resource. Contact the administrator of the server to
find
out
if
you
have access permissions. The network path was not found. "

When I choose View Workgroup Computers from the Compaq, I get
the
hourglass
for 20 seconds, then:
"SEQUOIA is not accessible. You might not have permission to use
this
network resource. Contact the administrator of the server to
find
out
if
you
have access permissions. The list of servers for this workgroup
is
not
currently available."

Hmm, the final sentence is different. I've changed the workgroup
name
several times, but no result.
Nan

"Thagor" wrote in message
y.com...
Do you see "File/Print sharing in that group? If not, install
it
and
put
a
check in the box. Then lets see what you have. Also recheck
the
NAME
of
the
Laptop and make sure it is recognized properly.


"Whelan" wrote in message
...
You asked "Can your router give you a list of the
computers by name and ip address?"
I don't know how to look at or communicate with the router.
(Maybe
it's
in
the router manual.)

Re Optional Network Components,
I see something similar under Local Area Connection, View
Status,
Properties. When highlighting either "Client for Microsoft
Networks"
or
"Internet Protocol TCP/IP", there's a button you can click
called
Install.
Clicking it gives you three choices: Client, Service, or
Protocol.
(I
saw
these Saturday but didn't think any of them applied.)
Client lets you add Client Service for Netware. Service lets
you
add
Service
Advertising Protocol. Protocol lets you add Microsoft IPv6
Developer
Edition, Network Monitor Driver or NWLink IPX/SPX/NetBIOS
Compatible
Transport Protocol.
Are any of those worth adding?

The computers appear the same in these settings.
Nan

"tc" wrote in message
news:[email protected]...
The 'can't ping by name' sounds significant. You haven't
got
2
computers
with the same name by any chance? Can your router give you
a
list
of
the
computers by name and ip address?
Terry

"Whelan" wrote in message
...
Some helpful people, Angus for one, suggested many
things
to
try.
The firewall is off.
I've standardized the login and workgroup names (tried 3
different
workgroup
names actually, with many reboots).

I have connected to the router (at times): a Dell 4500
desktop,
a
Gateway
Solo 2500 (a 1998 model), a new Dell 8500 laptop and the
Presario
1800.
They
all have XPPro except the Gateway has 98se. They can all
see
each
others'
shared folders etc except the Compaq -- it can't see
past
the
workgroup
name.

Angus told me how to "ping": They can ping each other by
name
and
IP
address, except the Compaq can only ping or be pinged by
IP
address.

The TCP/IP settings are the same on all (except the last
2
digits
of
the
addresses).

What are the "optional windows components? eg: the
networks
add-ons"
that
Trai' mentions? Will I find them on the XP installation
CD?
That might be worth a try!
Nan

"tc" wrote in message
news:[email protected]...
Also ensure the workgroup name is the same as any
other
computer
on
your
home network.
Terry

"tc" wrote in message
news:[email protected]...
It seems to me, if you can access the internet, you
should
be
able
to
access
your network. Assuming you are using a router and
the
other
machines
are
networking with tcp/ip, what would the difference
be?
Check
to
make
sure
your XP firewall is turned off.
Terry

"Whelan" wrote in message
...
I've just been handed down my son's Compaq
Presario
1800
laptop.
(I
bought
him a replacement.)

This Presario has never been able to tap into our
home
network
for
printing
or file sharing (since I installed Win XPPro on it
summer
2002.
However
it
can use DSL through our router. This last week I
have
tried
furiously
to
solve the networking problem, with lots of advice
on
the
Dell
message
boards, but nothing works.

It looks like I will have to reformat the hard
drive
and
reinstall
Win
XPPro
to have any hope of networking it.

Has anyone made a fresh start on a a Presario 1800
with
XP?
Was
it
difficult
to find drivers etc to make it work? I'm not
finding
what
I
need,
so
far,
on
the web site; it only lists Win Me and 2000.

(We did purchase an extended warranty in July
2001...
Any
chance
Compaq
would provide support of the type I need by
phone?)

Nan














---

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.558 / Virus Database: 350 - Release Date:
1/2/2004

Check for hidden spaces in the computer names and workgroups.
Occasionally an leading or trailing space ends up causing a bit of problem
connecting to the workgroup and/or the other computers in the workgroup.

KC


"Whelan" wrote in message
...
Yep, 'Obtain DNS Server address automatically' is checked everywhere.

I've been reading the Belkin manual and I went to the router by running
192.168.2.1 and found MAC addresses. And from some tips there about
"adding
computer" I was able to get the compaq's wireless card to see the router
and
it can connect to the internet. That added an additional IP address for
the
Compaq.

But both ways, the Compaq can only ping with the others by IP addresses,
not
name. A microsoft troubleshooter said the computer name might be a
duplicate, so I changed it to PRESARIO. Now both names get listed but
neither is accessible.

I'm very happy to have wireless internet access on the Compaq now. I can
probably share most files by a USB drive.
I just wish I could print!
Nan


"tc" wrote in message
news:[email protected]...
You did confirm that 'Obtain DNS Server address automatically' was
checked,
didn't you?
Terry

"tc" wrote in message
news:[email protected]...
I don't think Simple File Sharing applies if you are running Fat32.
Hmmm.
Terry

"Whelan" wrote in message
...
SEQUOIA is just the Workgroup name ... it's one of several I've
tried.
But
it's always the same, the Compaq can't get beyond the workgroup's
name.

I've started reading the articles you linked to ... I notice
references
to
NTFS file system.
I just realized that this Compaq uses FAT32 instead of NTFS. Could
that
be
a
problem? (But then so does the 1998 Gateway laptop, and it can share
anything.) Both the Dells have NTFS on their C partition.
Nan
Back to those articles.

"tc" wrote in message
news:[email protected]...
What is SEQUOIA? Is this another computer on your network?
Terry

"Whelan" wrote in message
...
The File and Printer Sharing for Microsoft Networks box is
checked
too.
Its
Install button offers the same 3 choices: Client, Service, and
Protocol.
The Compaq laptop's name is COMPAQ.

When I choose View Workgroup Computers from the Dells, Compaq
appears
on
the
list, but when I click on it I get:
"\\Compaq is not accessible. You might not have permission to
use
this
network resource. Contact the administrator of the server to
find
out
if
you
have access permissions. The network path was not found. "

When I choose View Workgroup Computers from the Compaq, I get
the
hourglass
for 20 seconds, then:
"SEQUOIA is not accessible. You might not have permission to use
this
network resource. Contact the administrator of the server to
find
out
if
you
have access permissions. The list of servers for this workgroup
is
not
currently available."

Hmm, the final sentence is different. I've changed the workgroup
name
several times, but no result.
Nan

"Thagor" wrote in message
y.com...
Do you see "File/Print sharing in that group? If not, install
it
and
put
a
check in the box. Then lets see what you have. Also recheck
the
NAME
of
the
Laptop and make sure it is recognized properly.


"Whelan" wrote in message
...
You asked "Can your router give you a list of the
computers by name and ip address?"
I don't know how to look at or communicate with the router.
(Maybe
it's
in
the router manual.)

Re Optional Network Components,
I see something similar under Local Area Connection, View
Status,
Properties. When highlighting either "Client for Microsoft
Networks"
or
"Internet Protocol TCP/IP", there's a button you can click
called
Install.
Clicking it gives you three choices: Client, Service, or
Protocol.
(I
saw
these Saturday but didn't think any of them applied.)
Client lets you add Client Service for Netware. Service lets
you
add
Service
Advertising Protocol. Protocol lets you add Microsoft IPv6
Developer
Edition, Network Monitor Driver or NWLink IPX/SPX/NetBIOS
Compatible
Transport Protocol.
Are any of those worth adding?

The computers appear the same in these settings.
Nan

"tc" wrote in message
news:[email protected]...
The 'can't ping by name' sounds significant. You haven't
got
2
computers
with the same name by any chance? Can your router give you
a
list
of
the
computers by name and ip address?
Terry

"Whelan" wrote in message
...
Some helpful people, Angus for one, suggested many
things
to
try.
The firewall is off.
I've standardized the login and workgroup names (tried 3
different
workgroup
names actually, with many reboots).

I have connected to the router (at times): a Dell 4500
desktop,
a
Gateway
Solo 2500 (a 1998 model), a new Dell 8500 laptop and the
Presario
1800.
They
all have XPPro except the Gateway has 98se. They can all
see
each
others'
shared folders etc except the Compaq -- it can't see
past
the
workgroup
name.

Angus told me how to "ping": They can ping each other by
name
and
IP
address, except the Compaq can only ping or be pinged by
IP
address.

The TCP/IP settings are the same on all (except the last
2
digits
of
the
addresses).

What are the "optional windows components? eg: the
networks
add-ons"
that
Trai' mentions? Will I find them on the XP installation
CD?
That might be worth a try!
Nan

"tc" wrote in message
news:[email protected]...
Also ensure the workgroup name is the same as any
other
computer
on
your
home network.
Terry

"tc" wrote in message
news:[email protected]...
It seems to me, if you can access the internet, you
should
be
able
to
access
your network. Assuming you are using a router and
the
other
machines
are
networking with tcp/ip, what would the difference
be?
Check
to
make
sure
your XP firewall is turned off.
Terry

"Whelan" wrote in message
...
I've just been handed down my son's Compaq
Presario
1800
laptop.
(I
bought
him a replacement.)

This Presario has never been able to tap into our
home
network
for
printing
or file sharing (since I installed Win XPPro on it
summer
2002.
However
it
can use DSL through our router. This last week I
have
tried
furiously
to
solve the networking problem, with lots of advice
on
the
Dell
message
boards, but nothing works.

It looks like I will have to reformat the hard
drive
and
reinstall
Win
XPPro
to have any hope of networking it.

Has anyone made a fresh start on a a Presario 1800
with
XP?
Was
it
difficult
to find drivers etc to make it work? I'm not
finding
what
I
need,
so
far,
on
the web site; it only lists Win Me and 2000.

(We did purchase an extended warranty in July
2001...
Any
chance
Compaq
would provide support of the type I need by
phone?)

Nan














---

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.558 / Virus Database: 350 - Release Date:
1/2/2004

I tried to install the network printer several times but couldn't because of
that same problem -- not seeing the Dell computer it's attached to.

I wish there was some way to install the printer using just the IP address
(which it can ping), bypassing name of computer it's attached to. I tried
typing that in, but it just wouldn't take it.

I wonder if that's possible somehow?

(I have a 256mb usb drive, so the lack of file sharing will be only a little
inconvenient.)
Nan
"tc" wrote in message
news:%[email protected]...
Both names are listed because the Netgear router didn't update its
database
to remove the old name. The only problem with duplicate names applies to
you
having 2 or more computers on the same network with the same name. If you
look at the list of names on the router, you will be able to tell if any
are
duplicated.

You can add a printer to an xp machine from Control Panel - Printers and
other hardware. Assuming you have the printer attached to another
computer,
you would choose Network Printer. If the wizard can find it, it will give
you the appropriate directions to add it to the Compaq. I have no idea
whether this will work as you can't share files. But its worth a try.
Terry

"Whelan" wrote in message
...
Yep, 'Obtain DNS Server address automatically' is checked everywhere.

I've been reading the Belkin manual and I went to the router by running
192.168.2.1 and found MAC addresses. And from some tips there about
"adding
computer" I was able to get the compaq's wireless card to see the router
and
it can connect to the internet. That added an additional IP address for
the
Compaq.

But both ways, the Compaq can only ping with the others by IP addresses,
not
name. A microsoft troubleshooter said the computer name might be a
duplicate, so I changed it to PRESARIO. Now both names get listed but
neither is accessible.

I'm very happy to have wireless internet access on the Compaq now. I can
probably share most files by a USB drive.
I just wish I could print!
Nan


"tc" wrote in message
news:[email protected]...
You did confirm that 'Obtain DNS Server address automatically' was
checked,
didn't you?
Terry

"tc" wrote in message
news:[email protected]...
I don't think Simple File Sharing applies if you are running Fat32.
Hmmm.
Terry

"Whelan" wrote in message
...
SEQUOIA is just the Workgroup name ... it's one of several I've
tried.
But
it's always the same, the Compaq can't get beyond the workgroup's
name.

I've started reading the articles you linked to ... I notice
references
to
NTFS file system.
I just realized that this Compaq uses FAT32 instead of NTFS. Could
that
be
a
problem? (But then so does the 1998 Gateway laptop, and it can
share
anything.) Both the Dells have NTFS on their C partition.
Nan
Back to those articles.

"tc" wrote in message
news:[email protected]...
What is SEQUOIA? Is this another computer on your network?
Terry

"Whelan" wrote in message
...
The File and Printer Sharing for Microsoft Networks box is
checked
too.
Its
Install button offers the same 3 choices: Client, Service, and
Protocol.
The Compaq laptop's name is COMPAQ.

When I choose View Workgroup Computers from the Dells, Compaq
appears
on
the
list, but when I click on it I get:
"\\Compaq is not accessible. You might not have permission to
use
this
network resource. Contact the administrator of the server to
find
out
if
you
have access permissions. The network path was not found. "

When I choose View Workgroup Computers from the Compaq, I get
the
hourglass
for 20 seconds, then:
"SEQUOIA is not accessible. You might not have permission to
use
this
network resource. Contact the administrator of the server to
find
out
if
you
have access permissions. The list of servers for this
workgroup
is
not
currently available."

Hmm, the final sentence is different. I've changed the
workgroup
name
several times, but no result.
Nan

"Thagor" wrote in message
y.com...
Do you see "File/Print sharing in that group? If not,
install
it
and
put
a
check in the box. Then lets see what you have. Also recheck
the
NAME
of
the
Laptop and make sure it is recognized properly.


"Whelan" wrote in message
...
You asked "Can your router give you a list of the
computers by name and ip address?"
I don't know how to look at or communicate with the
router.
(Maybe
it's
in
the router manual.)

Re Optional Network Components,
I see something similar under Local Area Connection, View
Status,
Properties. When highlighting either "Client for Microsoft
Networks"
or
"Internet Protocol TCP/IP", there's a button you can click
called
Install.
Clicking it gives you three choices: Client, Service, or
Protocol.
(I
saw
these Saturday but didn't think any of them applied.)
Client lets you add Client Service for Netware. Service
lets
you
add
Service
Advertising Protocol. Protocol lets you add Microsoft IPv6
Developer
Edition, Network Monitor Driver or NWLink IPX/SPX/NetBIOS
Compatible
Transport Protocol.
Are any of those worth adding?

The computers appear the same in these settings.
Nan

"tc" wrote in message
news:[email protected]...
The 'can't ping by name' sounds significant. You haven't
got
2
computers
with the same name by any chance? Can your router give
you
a
list
of
the
computers by name and ip address?
Terry

"Whelan" wrote in message
...
Some helpful people, Angus for one, suggested many
things
to
try.
The firewall is off.
I've standardized the login and workgroup names (tried
3
different
workgroup
names actually, with many reboots).

I have connected to the router (at times): a Dell 4500
desktop,
a
Gateway
Solo 2500 (a 1998 model), a new Dell 8500 laptop and
the
Presario
1800.
They
all have XPPro except the Gateway has 98se. They can
all
see
each
others'
shared folders etc except the Compaq -- it can't see
past
the
workgroup
name.

Angus told me how to "ping": They can ping each other
by
name
and
IP
address, except the Compaq can only ping or be pinged
by
IP
address.

The TCP/IP settings are the same on all (except the
last
2
digits
of
the
addresses).

What are the "optional windows components? eg: the
networks
add-ons"
that
Trai' mentions? Will I find them on the XP
installation
CD?
That might be worth a try!
Nan

"tc" wrote in message
news:[email protected]...
Also ensure the workgroup name is the same as any
other
computer
on
your
home network.
Terry

"tc" wrote in message
news:[email protected]...
It seems to me, if you can access the internet,
you
should
be
able
to
access
your network. Assuming you are using a router and
the
other
machines
are
networking with tcp/ip, what would the difference
be?
Check
to
make
sure
your XP firewall is turned off.
Terry

"Whelan" wrote in message
...
I've just been handed down my son's Compaq
Presario
1800
laptop.
(I
bought
him a replacement.)

This Presario has never been able to tap into
our
home
network
for
printing
or file sharing (since I installed Win XPPro on
it
summer
2002.
However
it
can use DSL through our router. This last week I
have
tried
furiously
to
solve the networking problem, with lots of
advice
on
the
Dell
message
boards, but nothing works.

It looks like I will have to reformat the hard
drive
and
reinstall
Win
XPPro
to have any hope of networking it.

Has anyone made a fresh start on a a Presario
1800
with
XP?
Was
it
difficult
to find drivers etc to make it work? I'm not
finding
what
I
need,
so
far,
on
the web site; it only lists Win Me and 2000.

(We did purchase an extended warranty in July
2001...
Any
chance
Compaq
would provide support of the type I need by
phone?)

Nan














---

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.558 / Virus Database: 350 - Release Date:
1/2/2004

You could always buy a stand alone print server device? Not the best
solution, but an option should all else fail.

KC

"Whelan" wrote in message
...
I tried to install the network printer several times but couldn't because
of
that same problem -- not seeing the Dell computer it's attached to.

I wish there was some way to install the printer using just the IP address
(which it can ping), bypassing name of computer it's attached to. I tried
typing that in, but it just wouldn't take it.

I wonder if that's possible somehow?

(I have a 256mb usb drive, so the lack of file sharing will be only a
little
inconvenient.)
Nan
"tc" wrote in message
news:%[email protected]...
Both names are listed because the Netgear router didn't update its
database
to remove the old name. The only problem with duplicate names applies to
you
having 2 or more computers on the same network with the same name. If
you
look at the list of names on the router, you will be able to tell if any
are
duplicated.

You can add a printer to an xp machine from Control Panel - Printers and
other hardware. Assuming you have the printer attached to another
computer,
you would choose Network Printer. If the wizard can find it, it will
give
you the appropriate directions to add it to the Compaq. I have no idea
whether this will work as you can't share files. But its worth a try.
Terry

"Whelan" wrote in message
...
Yep, 'Obtain DNS Server address automatically' is checked everywhere.

I've been reading the Belkin manual and I went to the router by
running
192.168.2.1 and found MAC addresses. And from some tips there about
"adding
computer" I was able to get the compaq's wireless card to see the
router
and
it can connect to the internet. That added an additional IP address
for
the
Compaq.

But both ways, the Compaq can only ping with the others by IP
addresses,
not
name. A microsoft troubleshooter said the computer name might be a
duplicate, so I changed it to PRESARIO. Now both names get listed but
neither is accessible.

I'm very happy to have wireless internet access on the Compaq now. I
can
probably share most files by a USB drive.
I just wish I could print!
Nan


"tc" wrote in message
news:[email protected]...
You did confirm that 'Obtain DNS Server address automatically' was
checked,
didn't you?
Terry

"tc" wrote in message
news:[email protected]...
I don't think Simple File Sharing applies if you are running
Fat32.
Hmmm.
Terry

"Whelan" wrote in message
...
SEQUOIA is just the Workgroup name ... it's one of several I've
tried.
But
it's always the same, the Compaq can't get beyond the
workgroup's
name.

I've started reading the articles you linked to ... I notice
references
to
NTFS file system.
I just realized that this Compaq uses FAT32 instead of NTFS.
Could
that
be
a
problem? (But then so does the 1998 Gateway laptop, and it can
share
anything.) Both the Dells have NTFS on their C partition.
Nan
Back to those articles.

"tc" wrote in message
news:[email protected]...
What is SEQUOIA? Is this another computer on your network?
Terry

"Whelan" wrote in message
...
The File and Printer Sharing for Microsoft Networks box is
checked
too.
Its
Install button offers the same 3 choices: Client, Service,
and
Protocol.
The Compaq laptop's name is COMPAQ.

When I choose View Workgroup Computers from the Dells,
Compaq
appears
on
the
list, but when I click on it I get:
"\\Compaq is not accessible. You might not have permission
to
use
this
network resource. Contact the administrator of the server to
find
out
if
you
have access permissions. The network path was not found. "

When I choose View Workgroup Computers from the Compaq, I
get
the
hourglass
for 20 seconds, then:
"SEQUOIA is not accessible. You might not have permission to
use
this
network resource. Contact the administrator of the server to
find
out
if
you
have access permissions. The list of servers for this
workgroup
is
not
currently available."

Hmm, the final sentence is different. I've changed the
workgroup
name
several times, but no result.
Nan

"Thagor" wrote in message
y.com...
Do you see "File/Print sharing in that group? If not,
install
it
and
put
a
check in the box. Then lets see what you have. Also
recheck
the
NAME
of
the
Laptop and make sure it is recognized properly.


"Whelan" wrote in message
...
You asked "Can your router give you a list of the
computers by name and ip address?"
I don't know how to look at or communicate with the
router.
(Maybe
it's
in
the router manual.)

Re Optional Network Components,
I see something similar under Local Area Connection,
View
Status,
Properties. When highlighting either "Client for
Microsoft
Networks"
or
"Internet Protocol TCP/IP", there's a button you can
click
called
Install.
Clicking it gives you three choices: Client, Service, or
Protocol.
(I
saw
these Saturday but didn't think any of them applied.)
Client lets you add Client Service for Netware. Service
lets
you
add
Service
Advertising Protocol. Protocol lets you add Microsoft
IPv6
Developer
Edition, Network Monitor Driver or NWLink
IPX/SPX/NetBIOS
Compatible
Transport Protocol.
Are any of those worth adding?

The computers appear the same in these settings.
Nan

"tc" wrote in message
news:[email protected]...
The 'can't ping by name' sounds significant. You
haven't
got
2
computers
with the same name by any chance? Can your router give
you
a
list
of
the
computers by name and ip address?
Terry

"Whelan" wrote in message
...
Some helpful people, Angus for one, suggested many
things
to
try.
The firewall is off.
I've standardized the login and workgroup names
(tried
3
different
workgroup
names actually, with many reboots).

I have connected to the router (at times): a Dell
4500
desktop,
a
Gateway
Solo 2500 (a 1998 model), a new Dell 8500 laptop and
the
Presario
1800.
They
all have XPPro except the Gateway has 98se. They can
all
see
each
others'
shared folders etc except the Compaq -- it can't see
past
the
workgroup
name.

Angus told me how to "ping": They can ping each
other
by
name
and
IP
address, except the Compaq can only ping or be
pinged
by
IP
address.

The TCP/IP settings are the same on all (except the
last
2
digits
of
the
addresses).

What are the "optional windows components? eg: the
networks
add-ons"
that
Trai' mentions? Will I find them on the XP
installation
CD?
That might be worth a try!
Nan

"tc" wrote in message
news:[email protected]...
Also ensure the workgroup name is the same as any
other
computer
on
your
home network.
Terry

"tc" wrote in message
news:[email protected]...
It seems to me, if you can access the internet,
you
should
be
able
to
access
your network. Assuming you are using a router
and
the
other
machines
are
networking with tcp/ip, what would the
difference
be?
Check
to
make
sure
your XP firewall is turned off.
Terry

"Whelan" wrote in message

...
I've just been handed down my son's Compaq
Presario
1800
laptop.
(I
bought
him a replacement.)

This Presario has never been able to tap into
our
home
network
for
printing
or file sharing (since I installed Win XPPro
on
it
summer
2002.
However
it
can use DSL through our router. This last week
I
have
tried
furiously
to
solve the networking problem, with lots of
advice
on
the
Dell
message
boards, but nothing works.

It looks like I will have to reformat the hard
drive
and
reinstall
Win
XPPro
to have any hope of networking it.

Has anyone made a fresh start on a a Presario
1800
with
XP?
Was
it
difficult
to find drivers etc to make it work? I'm not
finding
what
I
need,
so
far,
on
the web site; it only lists Win Me and 2000.

(We did purchase an extended warranty in July
2001...
Any
chance
Compaq
would provide support of the type I need by
phone?)

Nan














---

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.558 / Virus Database: 350 - Release Date:
1/2/2004

I have a 4p router with parallel port print server on my net that works
flawless. My sharing is all turned off and all systems print directly to the
router. In most cases you can get the router with print server built-in for
less than the cost of a stand alone net print server. Check the prices, I
paid $40 US for mine.


"Whelan" wrote in message
...
I tried to install the network printer several times but couldn't because
of
that same problem -- not seeing the Dell computer it's attached to.

I wish there was some way to install the printer using just the IP address
(which it can ping), bypassing name of computer it's attached to. I tried
typing that in, but it just wouldn't take it.

I wonder if that's possible somehow?

(I have a 256mb usb drive, so the lack of file sharing will be only a
little
inconvenient.)
Nan
"tc" wrote in message
news:%[email protected]...
Both names are listed because the Netgear router didn't update its
database
to remove the old name. The only problem with duplicate names applies to
you
having 2 or more computers on the same network with the same name. If
you
look at the list of names on the router, you will be able to tell if any
are
duplicated.

You can add a printer to an xp machine from Control Panel - Printers and
other hardware. Assuming you have the printer attached to another
computer,
you would choose Network Printer. If the wizard can find it, it will
give
you the appropriate directions to add it to the Compaq. I have no idea
whether this will work as you can't share files. But its worth a try.
Terry

"Whelan" wrote in message
...
Yep, 'Obtain DNS Server address automatically' is checked everywhere.

I've been reading the Belkin manual and I went to the router by
running
192.168.2.1 and found MAC addresses. And from some tips there about
"adding
computer" I was able to get the compaq's wireless card to see the
router
and
it can connect to the internet. That added an additional IP address
for
the
Compaq.

But both ways, the Compaq can only ping with the others by IP
addresses,
not
name. A microsoft troubleshooter said the computer name might be a
duplicate, so I changed it to PRESARIO. Now both names get listed but
neither is accessible.

I'm very happy to have wireless internet access on the Compaq now. I
can
probably share most files by a USB drive.
I just wish I could print!
Nan


"tc" wrote in message
news:[email protected]...
You did confirm that 'Obtain DNS Server address automatically' was
checked,
didn't you?
Terry

"tc" wrote in message
news:[email protected]...
I don't think Simple File Sharing applies if you are running
Fat32.
Hmmm.
Terry

"Whelan" wrote in message
...
SEQUOIA is just the Workgroup name ... it's one of several I've
tried.
But
it's always the same, the Compaq can't get beyond the
workgroup's
name.

I've started reading the articles you linked to ... I notice
references
to
NTFS file system.
I just realized that this Compaq uses FAT32 instead of NTFS.
Could
that
be
a
problem? (But then so does the 1998 Gateway laptop, and it can
share
anything.) Both the Dells have NTFS on their C partition.
Nan
Back to those articles.

"tc" wrote in message
news:[email protected]...
What is SEQUOIA? Is this another computer on your network?
Terry

"Whelan" wrote in message
...
The File and Printer Sharing for Microsoft Networks box is
checked
too.
Its
Install button offers the same 3 choices: Client, Service,
and
Protocol.
The Compaq laptop's name is COMPAQ.

When I choose View Workgroup Computers from the Dells,
Compaq
appears
on
the
list, but when I click on it I get:
"\\Compaq is not accessible. You might not have permission
to
use
this
network resource. Contact the administrator of the server to
find
out
if
you
have access permissions. The network path was not found. "

When I choose View Workgroup Computers from the Compaq, I
get
the
hourglass
for 20 seconds, then:
"SEQUOIA is not accessible. You might not have permission to
use
this
network resource. Contact the administrator of the server to
find
out
if
you
have access permissions. The list of servers for this
workgroup
is
not
currently available."

Hmm, the final sentence is different. I've changed the
workgroup
name
several times, but no result.
Nan

"Thagor" wrote in message
y.com...
Do you see "File/Print sharing in that group? If not,
install
it
and
put
a
check in the box. Then lets see what you have. Also
recheck
the
NAME
of
the
Laptop and make sure it is recognized properly.


"Whelan" wrote in message
...
You asked "Can your router give you a list of the
computers by name and ip address?"
I don't know how to look at or communicate with the
router.
(Maybe
it's
in
the router manual.)

Re Optional Network Components,
I see something similar under Local Area Connection,
View
Status,
Properties. When highlighting either "Client for
Microsoft
Networks"
or
"Internet Protocol TCP/IP", there's a button you can
click
called
Install.
Clicking it gives you three choices: Client, Service, or
Protocol.
(I
saw
these Saturday but didn't think any of them applied.)
Client lets you add Client Service for Netware. Service
lets
you
add
Service
Advertising Protocol. Protocol lets you add Microsoft
IPv6
Developer
Edition, Network Monitor Driver or NWLink
IPX/SPX/NetBIOS
Compatible
Transport Protocol.
Are any of those worth adding?

The computers appear the same in these settings.
Nan

"tc" wrote in message
news:[email protected]...
The 'can't ping by name' sounds significant. You
haven't
got
2
computers
with the same name by any chance? Can your router give
you
a
list
of
the
computers by name and ip address?
Terry

"Whelan" wrote in message
...
Some helpful people, Angus for one, suggested many
things
to
try.
The firewall is off.
I've standardized the login and workgroup names
(tried
3
different
workgroup
names actually, with many reboots).

I have connected to the router (at times): a Dell
4500
desktop,
a
Gateway
Solo 2500 (a 1998 model), a new Dell 8500 laptop and
the
Presario
1800.
They
all have XPPro except the Gateway has 98se. They can
all
see
each
others'
shared folders etc except the Compaq -- it can't see
past
the
workgroup
name.

Angus told me how to "ping": They can ping each
other
by
name
and
IP
address, except the Compaq can only ping or be
pinged
by
IP
address.

The TCP/IP settings are the same on all (except the
last
2
digits
of
the
addresses).

What are the "optional windows components? eg: the
networks
add-ons"
that
Trai' mentions? Will I find them on the XP
installation
CD?
That might be worth a try!
Nan

"tc" wrote in message
news:[email protected]...
Also ensure the workgroup name is the same as any
other
computer
on
your
home network.
Terry

"tc" wrote in message
news:[email protected]...
It seems to me, if you can access the internet,
you
should
be
able
to
access
your network. Assuming you are using a router
and
the
other
machines
are
networking with tcp/ip, what would the
difference
be?
Check
to
make
sure
your XP firewall is turned off.
Terry

"Whelan" wrote in message

...
I've just been handed down my son's Compaq
Presario
1800
laptop.
(I
bought
him a replacement.)

This Presario has never been able to tap into
our
home
network
for
printing
or file sharing (since I installed Win XPPro
on
it
summer
2002.
However
it
can use DSL through our router. This last week
I
have
tried
furiously
to
solve the networking problem, with lots of
advice
on
the
Dell
message
boards, but nothing works.

It looks like I will have to reformat the hard
drive
and
reinstall
Win
XPPro
to have any hope of networking it.

Has anyone made a fresh start on a a Presario
1800
with
XP?
Was
it
difficult
to find drivers etc to make it work? I'm not
finding
what
I
need,
so
far,
on
the web site; it only lists Win Me and 2000.

(We did purchase an extended warranty in July
2001...
Any
chance
Compaq
would provide support of the type I need by
phone?)

Nan














---

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.558 / Virus Database: 350 - Release Date:
1/2/2004




















---

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.558 / Virus Database: 350 - Release Date: 1/2/2004

I give up. Maybe one of the services that XP requires is turned off. I don't
know which ones do what so I can't help there. If you have a real copy of
XP, have you tried a repair install?
Terry

"Whelan" wrote in message
...
I tried to install the network printer several times but couldn't because
of
that same problem -- not seeing the Dell computer it's attached to.

I wish there was some way to install the printer using just the IP address
(which it can ping), bypassing name of computer it's attached to. I tried
typing that in, but it just wouldn't take it.

I wonder if that's possible somehow?

(I have a 256mb usb drive, so the lack of file sharing will be only a
little
inconvenient.)
Nan
"tc" wrote in message
news:%[email protected]...
Both names are listed because the Netgear router didn't update its
database
to remove the old name. The only problem with duplicate names applies to
you
having 2 or more computers on the same network with the same name. If
you
look at the list of names on the router, you will be able to tell if any
are
duplicated.

You can add a printer to an xp machine from Control Panel - Printers and
other hardware. Assuming you have the printer attached to another
computer,
you would choose Network Printer. If the wizard can find it, it will
give
you the appropriate directions to add it to the Compaq. I have no idea
whether this will work as you can't share files. But its worth a try.
Terry

"Whelan" wrote in message
...
Yep, 'Obtain DNS Server address automatically' is checked everywhere.

I've been reading the Belkin manual and I went to the router by
running
192.168.2.1 and found MAC addresses. And from some tips there about
"adding
computer" I was able to get the compaq's wireless card to see the
router
and
it can connect to the internet. That added an additional IP address
for
the
Compaq.

But both ways, the Compaq can only ping with the others by IP
addresses,
not
name. A microsoft troubleshooter said the computer name might be a
duplicate, so I changed it to PRESARIO. Now both names get listed but
neither is accessible.

I'm very happy to have wireless internet access on the Compaq now. I
can
probably share most files by a USB drive.
I just wish I could print!
Nan


"tc" wrote in message
news:[email protected]...
You did confirm that 'Obtain DNS Server address automatically' was
checked,
didn't you?
Terry

"tc" wrote in message
news:[email protected]...
I don't think Simple File Sharing applies if you are running
Fat32.
Hmmm.
Terry

"Whelan" wrote in message
...
SEQUOIA is just the Workgroup name ... it's one of several I've
tried.
But
it's always the same, the Compaq can't get beyond the
workgroup's
name.

I've started reading the articles you linked to ... I notice
references
to
NTFS file system.
I just realized that this Compaq uses FAT32 instead of NTFS.
Could
that
be
a
problem? (But then so does the 1998 Gateway laptop, and it can
share
anything.) Both the Dells have NTFS on their C partition.
Nan
Back to those articles.

"tc" wrote in message
news:[email protected]...
What is SEQUOIA? Is this another computer on your network?
Terry

"Whelan" wrote in message
...
The File and Printer Sharing for Microsoft Networks box is
checked
too.
Its
Install button offers the same 3 choices: Client, Service,
and
Protocol.
The Compaq laptop's name is COMPAQ.

When I choose View Workgroup Computers from the Dells,
Compaq
appears
on
the
list, but when I click on it I get:
"\\Compaq is not accessible. You might not have permission
to
use
this
network resource. Contact the administrator of the server to
find
out
if
you
have access permissions. The network path was not found. "

When I choose View Workgroup Computers from the Compaq, I
get
the
hourglass
for 20 seconds, then:
"SEQUOIA is not accessible. You might not have permission to
use
this
network resource. Contact the administrator of the server to
find
out
if
you
have access permissions. The list of servers for this
workgroup
is
not
currently available."

Hmm, the final sentence is different. I've changed the
workgroup
name
several times, but no result.
Nan

"Thagor" wrote in message
y.com...
Do you see "File/Print sharing in that group? If not,
install
it
and
put
a
check in the box. Then lets see what you have. Also
recheck
the
NAME
of
the
Laptop and make sure it is recognized properly.


"Whelan" wrote in message
...
You asked "Can your router give you a list of the
computers by name and ip address?"
I don't know how to look at or communicate with the
router.
(Maybe
it's
in
the router manual.)

Re Optional Network Components,
I see something similar under Local Area Connection,
View
Status,
Properties. When highlighting either "Client for
Microsoft
Networks"
or
"Internet Protocol TCP/IP", there's a button you can
click
called
Install.
Clicking it gives you three choices: Client, Service, or
Protocol.
(I
saw
these Saturday but didn't think any of them applied.)
Client lets you add Client Service for Netware. Service
lets
you
add
Service
Advertising Protocol. Protocol lets you add Microsoft
IPv6
Developer
Edition, Network Monitor Driver or NWLink
IPX/SPX/NetBIOS
Compatible
Transport Protocol.
Are any of those worth adding?

The computers appear the same in these settings.
Nan

"tc" wrote in message
news:[email protected]...
The 'can't ping by name' sounds significant. You
haven't
got
2
computers
with the same name by any chance? Can your router give
you
a
list
of
the
computers by name and ip address?
Terry

"Whelan" wrote in message
...
Some helpful people, Angus for one, suggested many
things
to
try.
The firewall is off.
I've standardized the login and workgroup names
(tried
3
different
workgroup
names actually, with many reboots).

I have connected to the router (at times): a Dell
4500
desktop,
a
Gateway
Solo 2500 (a 1998 model), a new Dell 8500 laptop and
the
Presario
1800.
They
all have XPPro except the Gateway has 98se. They can
all
see
each
others'
shared folders etc except the Compaq -- it can't see
past
the
workgroup
name.

Angus told me how to "ping": They can ping each
other
by
name
and
IP
address, except the Compaq can only ping or be
pinged
by
IP
address.

The TCP/IP settings are the same on all (except the
last
2
digits
of
the
addresses).

What are the "optional windows components? eg: the
networks
add-ons"
that
Trai' mentions? Will I find them on the XP
installation
CD?
That might be worth a try!
Nan

"tc" wrote in message
news:[email protected]...
Also ensure the workgroup name is the same as any
other
computer
on
your
home network.
Terry

"tc" wrote in message
news:[email protected]...
It seems to me, if you can access the internet,
you
should
be
able
to
access
your network. Assuming you are using a router
and
the
other
machines
are
networking with tcp/ip, what would the
difference
be?
Check
to
make
sure
your XP firewall is turned off.
Terry

"Whelan" wrote in message

...
I've just been handed down my son's Compaq
Presario
1800
laptop.
(I
bought
him a replacement.)

This Presario has never been able to tap into
our
home
network
for
printing
or file sharing (since I installed Win XPPro
on
it
summer
2002.
However
it
can use DSL through our router. This last week
I
have
tried
furiously
to
solve the networking problem, with lots of
advice
on
the
Dell
message
boards, but nothing works.

It looks like I will have to reformat the hard
drive
and
reinstall
Win
XPPro
to have any hope of networking it.

Has anyone made a fresh start on a a Presario
1800
with
XP?
Was
it
difficult
to find drivers etc to make it work? I'm not
finding
what
I
need,
so
far,
on
the web site; it only lists Win Me and 2000.

(We did purchase an extended warranty in July
2001...
Any
chance
Compaq
would provide support of the type I need by
phone?)

Nan














---

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.558 / Virus Database: 350 - Release Date:
1/2/2004