If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Will my MOBO work with 5 ide devices?
I have a 450watt PSU, 2.4ghz P4, 650mb ram.
I just put in a DVD writer and now have a total of 3 cd drives and 2 hard drives in my comp. The comp's performance seems sluggish now. I am also wondering if there are any jumpers on my MOBO I need to change to compensate/accommodate my new HDD and DVD drive. Thanks. http://www.baber.com/baber/411/asus_p4s533-mx.htm |
#2
|
|||
|
|||
Will my MOBO work with 5 ide devices?
John Wilson wrote:
I have a 450watt PSU, 2.4ghz P4, 650mb ram. I just put in a DVD writer and now have a total of 3 cd drives and 2 hard drives in my comp. The comp's performance seems sluggish now. I am also wondering if there are any jumpers on my MOBO I need to change to compensate/accommodate my new HDD and DVD drive. Thanks. http://www.baber.com/baber/411/asus_p4s533-mx.htm I don't know how you can accommodate 5 ide-devices unless you have a separate PCI IDE controller. There are no jumpers on the mobo. Just be sure to check jumpers on drives ,cables and that DMA mode is in use (check in device manager). |
#3
|
|||
|
|||
Will my MOBO work with 5 ide devices?
"Egil Solberg" wrote in message ... John Wilson wrote: I have a 450watt PSU, 2.4ghz P4, 650mb ram. I just put in a DVD writer and now have a total of 3 cd drives and 2 hard drives in my comp. The comp's performance seems sluggish now. I am also wondering if there are any jumpers on my MOBO I need to change to compensate/accommodate my new HDD and DVD drive. Thanks. http://www.baber.com/baber/411/asus_p4s533-mx.htm I don't know how you can accommodate 5 ide-devices unless you have a separate PCI IDE controller. There are no jumpers on the mobo. Just be sure to check jumpers on drives ,cables and that DMA mode is in use (check in device manager). Unless you were seriously pirating discs why would you want 3 optical drives when the DVD writer is enough? |
#4
|
|||
|
|||
Will my MOBO work with 5 ide devices?
Stay on topic please, and don't insult me with your erroneous assumptions.
"Venom" wrote in message ... "Egil Solberg" wrote in message ... John Wilson wrote: I have a 450watt PSU, 2.4ghz P4, 650mb ram. I just put in a DVD writer and now have a total of 3 cd drives and 2 hard drives in my comp. The comp's performance seems sluggish now. I am also wondering if there are any jumpers on my MOBO I need to change to compensate/accommodate my new HDD and DVD drive. Thanks. http://www.baber.com/baber/411/asus_p4s533-mx.htm I don't know how you can accommodate 5 ide-devices unless you have a separate PCI IDE controller. There are no jumpers on the mobo. Just be sure to check jumpers on drives ,cables and that DMA mode is in use (check in device manager). Unless you were seriously pirating discs why would you want 3 optical drives when the DVD writer is enough? |
#5
|
|||
|
|||
Will my MOBO work with 5 ide devices?
Thanks. Yes, I have done all that, but the MOBO manual has all these
settings showing power/voltage in a diagram next to the devices I have been installing. Yes, I have an ATA133 pci card. Thank you again for your response. "Egil Solberg" wrote in message ... John Wilson wrote: I have a 450watt PSU, 2.4ghz P4, 650mb ram. I just put in a DVD writer and now have a total of 3 cd drives and 2 hard drives in my comp. The comp's performance seems sluggish now. I am also wondering if there are any jumpers on my MOBO I need to change to compensate/accommodate my new HDD and DVD drive. Thanks. http://www.baber.com/baber/411/asus_p4s533-mx.htm I don't know how you can accommodate 5 ide-devices unless you have a separate PCI IDE controller. There are no jumpers on the mobo. Just be sure to check jumpers on drives ,cables and that DMA mode is in use (check in device manager). |
#6
|
|||
|
|||
Will my MOBO work with 5 ide devices?
Venom wrote:
"Egil Solberg" wrote in message ... John Wilson wrote: I have a 450watt PSU, 2.4ghz P4, 650mb ram. I just put in a DVD writer and now have a total of 3 cd drives and 2 hard drives in my comp. The comp's performance seems sluggish now. I am also wondering if there are any jumpers on my MOBO I need to change to compensate/accommodate my new HDD and DVD drive. Thanks. http://www.baber.com/baber/411/asus_p4s533-mx.htm I don't know how you can accommodate 5 ide-devices unless you have a separate PCI IDE controller. There are no jumpers on the mobo. Just be sure to check jumpers on drives ,cables and that DMA mode is in use (check in device manager). Unless you were seriously pirating discs why would you want 3 optical drives when the DVD writer is enough? Hmm, lets see. The machine next to me has 3 optical drives and has never been used as a disk duplicator. THe drives a 1 x CDROM (because the system can't boot from the DVD - old BIOS[1]) 1 x DVD+/-RW (and CDRW obviously) 1 x MO drive (to read archived data from a legacy system) So your assumption is way off-base (even if the MO drive is SCSI). James [1] The BIOS can't be updated anymore - the manufacturer (IBM) no longer supports the dinosaur and no 3rd parties have stepped up. -- The more things change, the more they'll never be the same again. |
#7
|
|||
|
|||
Will my MOBO work with 5 ide devices?
Coonect the hard drive by itself on IDE 1 on the motherboard and see if
performance increases. That will still leave you enough connections for your other drives. "John Wilson" wrote in message ... I have a 450watt PSU, 2.4ghz P4, 650mb ram. I just put in a DVD writer and now have a total of 3 cd drives and 2 hard drives in my comp. The comp's performance seems sluggish now. I am also wondering if there are any jumpers on my MOBO I need to change to compensate/accommodate my new HDD and DVD drive. Thanks. http://www.baber.com/baber/411/asus_p4s533-mx.htm |
#8
|
|||
|
|||
Will my MOBO work with 5 ide devices?
Ah, that is why I got the ATA133 pci card. Both hdd's are on their own
channel. BTW, when I disconnect one of the cd drives, my performance picks back up (windows and files open faster, programs save faster, etc.) Thanks. "RonK" wrote in message ... Coonect the hard drive by itself on IDE 1 on the motherboard and see if performance increases. That will still leave you enough connections for your other drives. "John Wilson" wrote in message ... I have a 450watt PSU, 2.4ghz P4, 650mb ram. I just put in a DVD writer and now have a total of 3 cd drives and 2 hard drives in my comp. The comp's performance seems sluggish now. I am also wondering if there are any jumpers on my MOBO I need to change to compensate/accommodate my new HDD and DVD drive. Thanks. http://www.baber.com/baber/411/asus_p4s533-mx.htm |
#10
|
|||
|
|||
Will my MOBO work with 5 ide devices?
In article ,
, ByTor says... In article , , John Wilson says... I have a 450watt PSU, 2.4ghz P4, 650mb ram. I just put in a DVD writer and now have a total of 3 cd drives and 2 hard drives in my comp. The comp's performance seems sluggish now. I am also wondering if there are any jumpers on my MOBO I need to change to compensate/accommodate my new HDD and DVD drive. Thanks. http://www.baber.com/baber/411/asus_p4s533-mx.htm I read the rest of the posts.............. How exactly are your devices connected? What type of controller card is it? Your power supply is sufficient as I have 6 HD's & 5 optical drives attached in my machine and works perfectly on a 450W......Mind you I have a different board but had to juggle devices around....Maxtors did not like WesternD's, Plextors didn't like some **** brand optical attached to it, etc. ALL my opticals are on one Sigg controller though except one attached to the MB IDE.......Maybe ya need some jugglin' round..........Be careful attaching HD's if it's a Sigg controller card it will change disk order and ya may not be able to boot the OS drive if you put a "data" HD on the card........ BTW: Attaching a lower end device like an optical drive to a HDrive is not good practice......If you are connected like that, remove the optical and see what happens......... -- ************************************************* Across the river Styx, Out of the lamplight His nemesis is waiting at the gate The Snow Dog, ermine glowing In the damp night Coal-black eyes shimmering with hate By-Tor and the Snow Dog Square for battle Let the fray begin |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Will both these devices work inside my computer? | John Wilson | Homebuilt PC's | 1 | December 5th 05 03:25 AM |
pc problems after g card upgrade + sp2 | ben reed | Homebuilt PC's | 9 | November 30th 04 01:04 AM |
Last/Fastest cB0 stepped 'gray zone' Celerons work natively on Abit ZM6/BM6? | pgtr | General | 15 | July 9th 04 07:29 PM |
fx geforce 5200 does't work on ecs mobo | Olivier | Nvidia Videocards | 0 | December 7th 03 01:58 AM |
will gforce 4 card work on my old p2 and athlon mobo? | Acid_Rain | Nvidia Videocards | 1 | September 15th 03 06:44 AM |