If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Client Lease Time?
What's the significance of the client lease time in a linksys router?
Apparently 30000 is not a good idea - I ran out of legal addresses. Next try is 0. I'm not sure what I'm trading off with this. -- On the internet, nobody knows you're a jerk. |
#2
|
|||
|
|||
Client Lease Time?
On 11/21/2010 10:59 AM, Ron Hardin wrote:
What's the significance of the client lease time in a linksys router? Apparently 30000 is not a good idea - I ran out of legal addresses. Next try is 0. I'm not sure what I'm trading off with this. You attempted to set a release time of approximately 3 weeks. The Client Lease Time is the amount of time a network user will be allowed connection to the Router with their current dynamic IP address. Enter the amount of time, in minutes, that the user will be “leased” this dynamic IP address. After the time is up, the user will be automatically assigned a new dynamic IP address. The default is 0 minutes, which means one day. |
#3
|
|||
|
|||
Client Lease Time?
Pen wrote:
On 11/21/2010 10:59 AM, Ron Hardin wrote: What's the significance of the client lease time in a linksys router? Apparently 30000 is not a good idea - I ran out of legal addresses. Next try is 0. I'm not sure what I'm trading off with this. You attempted to set a release time of approximately 3 weeks. The Client Lease Time is the amount of time a network user will be allowed connection to the Router with their current dynamic IP address. Enter the amount of time, in minutes, that the user will be “leased” this dynamic IP address. After the time is up, the user will be automatically assigned a new dynamic IP address. The default is 0 minutes, which means one day. Thanks. What happens when the lease time is up if the laptop is still connected to the network? Mine is on 24/7. Does it start a negotiation on a new address, or just hang? Windows XP Home. -- On the internet, nobody knows you're a jerk. |
#4
|
|||
|
|||
Client Lease Time?
On 11/21/2010 12:19 PM, Ron Hardin wrote:
Pen wrote: On 11/21/2010 10:59 AM, Ron Hardin wrote: What's the significance of the client lease time in a linksys router? Apparently 30000 is not a good idea - I ran out of legal addresses. Next try is 0. I'm not sure what I'm trading off with this. You attempted to set a release time of approximately 3 weeks. The Client Lease Time is the amount of time a network user will be allowed connection to the Router with their current dynamic IP address. Enter the amount of time, in minutes, that the user will be “leased” this dynamic IP address. After the time is up, the user will be automatically assigned a new dynamic IP address. The default is 0 minutes, which means one day. Thanks. What happens when the lease time is up if the laptop is still connected to the network? Mine is on 24/7. Does it start a negotiation on a new address, or just hang? Windows XP Home. It just gets a new one. Mine is on 24/7 for months at a time. |
#5
|
|||
|
|||
Client Lease Time?
On 11/21/2010 12:19 PM, Ron Hardin wrote:
Pen wrote: On 11/21/2010 10:59 AM, Ron Hardin wrote: What's the significance of the client lease time in a linksys router? Apparently 30000 is not a good idea - I ran out of legal addresses. Next try is 0. I'm not sure what I'm trading off with this. You attempted to set a release time of approximately 3 weeks. The Client Lease Time is the amount of time a network user will be allowed connection to the Router with their current dynamic IP address. Enter the amount of time, in minutes, that the user will be “leased” this dynamic IP address. After the time is up, the user will be automatically assigned a new dynamic IP address. The default is 0 minutes, which means one day. Thanks. What happens when the lease time is up if the laptop is still connected to the network? Mine is on 24/7. Does it start a negotiation on a new address, or just hang? Windows XP Home. It just gets a new one. Mine is on 24/7 for months at a time. |
#6
|
|||
|
|||
Client Lease Time?
On 11/21/2010 10:59 AM, Ron Hardin wrote:
What's the significance of the client lease time in a linksys router? Apparently 30000 is not a good idea - I ran out of legal addresses. Next try is 0. I'm not sure what I'm trading off with this. when a device like a laptop connects to your linksys router is is given what is called an ip address for a certain amount of time (the lease). this address allows the device to communicate with the router and other devices on the network without conflict. if you are running out of 'legal addresses' you can do many things. one is to shorten the lease time for the ip address as you seem to be trying to do so that the computer that was using has to renew or it is dropped from the list of leased address making the address once again available to be issued to some other device. another is to increase the number of available address issued by the linksys router (found under the dhcp configuration settings). linksys typically defaults to issuing about 50 ip addresses (192.168.1.100-150). but you have to ask yourself what you are doing... are you a coffee shop that has scores of laptop users coming in and out of the shop every day and connecting to your router for just a moment? are you living in an apartment building and don't have a password on your wireless router and everyone in the building is connecting wirelessly to your router and using your internet service and blocking you from connecting to the router yourself... a lot is definately missing from your question, and i don't just mean the 'please' or 'thank you.' |
#7
|
|||
|
|||
Client Lease Time?
On 11/21/2010 12:35 PM, Pen wrote:
On 11/21/2010 12:19 PM, Ron Hardin wrote: Pen wrote: On 11/21/2010 10:59 AM, Ron Hardin wrote: What's the significance of the client lease time in a linksys router? Apparently 30000 is not a good idea - I ran out of legal addresses. Next try is 0. I'm not sure what I'm trading off with this. You attempted to set a release time of approximately 3 weeks. The Client Lease Time is the amount of time a network user will be allowed connection to the Router with their current dynamic IP address. Enter the amount of time, in minutes, that the user will be “leased” this dynamic IP address. After the time is up, the user will be automatically assigned a new dynamic IP address. The default is 0 minutes, which means one day. Thanks. What happens when the lease time is up if the laptop is still connected to the network? Mine is on 24/7. Does it start a negotiation on a new address, or just hang? Windows XP Home. It just gets a new one. Mine is on 24/7 for months at a time. that is not correct. if the computer is on and connected to the network when the lease reaches expiration, the computer renews its lease in which case the ip address stays the same. |
#8
|
|||
|
|||
Client Lease Time?
Hi!
that is not correct. if the computer is on and connected to the network when the lease reaches expiration, the computer renews its lease in which case the ip address stays the same. Nor is that 100% true. What your router or DHCP server actually does depends greatly upon its programming. I don't believe the technical documentation specifies a behavior, and I've seen different devices that do both. William |
#9
|
|||
|
|||
Client Lease Time?
The 'typical' 'general' behavior of a DHCP server is to indeed pass out IP
address as a clients requests them, for a standard default amount of time. And yes, this all depends on the particular settings/programming of the DHCP server. For the sake of this discussion, we'll use 3 days as the lease time. During those three days, the DHCP server will check with the client to see if it's still using the address I seem to recall that the DHCP server will check halfway through the lease period. If the client is still using the address, the lease will get renewed/extended/continued. If after the set time period the client is not using that address, it gets put back in the pool of available address ready to be handed out to the next client asking for one. The shorter the lease time is set to, the quicker the lease address can become available for example if it's a laptop that acquires an address, then the laptop is removed from the network for a few days. For a home network, there really normally isn't any great need to set the lease time for a great amount of time since an active lease will get renewed automatically. The danger would be, if you set the lease time to a great amount of time, and you are connecting and disconnecting a large number of clients, then you can run out of addresses potentially. The downside to setting a short lease time is that it increases the network traffic generated by the DHCP server as it checks the clients more often to see if they are still using the address. Again, that amount of traffic shouldn't be an issue with a typical home lan. "William R. Walsh" wrote in message ... Hi! that is not correct. if the computer is on and connected to the network when the lease reaches expiration, the computer renews its lease in which case the ip address stays the same. Nor is that 100% true. What your router or DHCP server actually does depends greatly upon its programming. I don't believe the technical documentation specifies a behavior, and I've seen different devices that do both. William |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
recommendation for off lease dell | L | Dell Computers | 6 | February 16th 08 06:12 PM |
Used Laptops Off of Lease | Herb Stein | Dell Computers | 9 | February 11th 08 04:48 PM |
Client Lease Time? LINKSYS Router | Ron Hardin | Dell Computers | 11 | August 29th 07 01:59 AM |
Lease?! | Champagne Charlie | Dell Computers | 12 | February 28th 04 06:51 PM |
Off lease laptops | The Walkers | General | 1 | January 27th 04 01:33 AM |