If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Mobile Barton / Abit KD7 oc problems
In a temporary computer I've got a mobile 2500+ on an Abit KD7 mobo. Of
course, this mobo likes 133mhz fsb, but it should be able to support a Barton at 166 (shouldn't it?). I ran an oc'ed T'bred in it for a long time, with no problems, but I absolutely cannot make it run this Barton at 166mhz. It has no trouble running at 2ghz+ with a higher multiplier, but it doesn't like it at all when I up the fsb. What might be the problem? I've jacked up the voltages, and even pulled out all PCI cards (although the board basically locks the pci/agp dividers with it's 5/2/1 option). I've tried all sorts of memory timings and even different RAM, all PC3200 or higher. The cpu runs at 166mhz and even 200mhz fsb in other boards, but it simply won't cooperate in the KD7. What am I missing? Thanks, jm |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Epox 8KRAI-X and a Mobile Barton ? | ROEKing | Overclocking AMD Processors | 9 | March 12th 05 09:29 PM |
Radeon 9800 Pro and Mobile barton at 2.5ghz good match ?? | The Other Guy. | Homebuilt PC's | 3 | November 19th 04 11:31 PM |
Is this mobile Barton 2500 a good overclocker ? | Phil Weldon | General | 7 | June 25th 04 01:44 AM |
Abit NF7-S Rev 2.0 good for a Barton 3200 400fsb CPU ? | We Live For The One We Die For The One | Abit Motherboards | 1 | February 28th 04 07:10 PM |
Abit KD7-RAID and Highpoint problems | Terry | Abit Motherboards | 3 | November 7th 03 10:57 PM |