If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Ancient Deskpro 8086 question
Here goes:
Does anyone know how to switch a Compaq Deskpro 8086 from IBM-compatible 4.77Mz mode to the "turbo" 7Mz mode? I recently picked up one of these puppies -without OS- and I can't figure the keystrokes, nor are there any DIP switches to adjust this. I've already tried the old XT-clone Control-Alt-Plus combo that worked with XT "turbo" clones, and that one doesn't work. Any suggestions would be appreciated. |
#2
|
|||
|
|||
You might also try ctl-alt-esc. Do you have the original keyboard? Not sure,
but there may have been a turbo key. You could also try switching it on via software. I have a turbo on/off utility that works on XT's but not sure if it will work on an 8086. "Casey Tompkins" wrote in message ... Here goes: Does anyone know how to switch a Compaq Deskpro 8086 from IBM-compatible 4.77Mz mode to the "turbo" 7Mz mode? I recently picked up one of these puppies -without OS- and I can't figure the keystrokes, nor are there any DIP switches to adjust this. I've already tried the old XT-clone Control-Alt-Plus combo that worked with XT "turbo" clones, and that one doesn't work. Any suggestions would be appreciated. |
#3
|
|||
|
|||
David wrote:
You might also try ctl-alt-esc. Do you have the original keyboard? Not sure, but there may have been a turbo key. You could also try switching it on via software. I have a turbo on/off utility that works on XT's but not sure if it will work on an 8086. "Casey Tompkins" wrote in message ... Wasn't the software command Ctrl+Alt+(Plus sign) to set turbo, and Ctrl+Alt+(Minus sign) for turbo off??? It has been a long time. Here goes: Does anyone know how to switch a Compaq Deskpro 8086 from IBM-compatible 4.77Mz mode to the "turbo" 7Mz mode? I recently picked up one of these puppies -without OS- and I can't figure the keystrokes, nor are there any DIP switches to adjust this. I've already tried the old XT-clone Control-Alt-Plus combo that worked with XT "turbo" clones, and that one doesn't work. Any suggestions would be appreciated. |
#4
|
|||
|
|||
Let's see, in order:
David, I have the original keyboard, and the amber mono monitor. It's a very clean system! But no, ctl-alt-esc didn't do anything. I did find out that ctl-alt- switched the monitor down to CGA resolution, and ctl-alt- kicked it back into high-resolution MGA mode. I'm not sure the XT "turbo" program would work, but if you want to email it to me, feel free. Ken, thanks for the suggestion ,but that only works on XT clone systems. You see, Compaq was so intent on being "IBM compatible" that they even wanted their systems to *sound* like IBMs, with keyboard "click" and all. The problem was that those buckling-spring keyboards were *heavy* (and more expensive), so they added a software-driven "key click" sound instead. ctl-alt-plus and ctl-alt-minus increased and decreased the clicking sound on the early Compaqs. On Tue, 26 Oct 2004 12:43:45 GMT, Ken wrote: David wrote: You might also try ctl-alt-esc. Do you have the original keyboard? Not sure, but there may have been a turbo key. You could also try switching it on via software. I have a turbo on/off utility that works on XT's but not sure if it will work on an 8086. "Casey Tompkins" wrote in message ... Wasn't the software command Ctrl+Alt+(Plus sign) to set turbo, and Ctrl+Alt+(Minus sign) for turbo off??? It has been a long time. Here goes: Does anyone know how to switch a Compaq Deskpro 8086 from IBM-compatible 4.77Mz mode to the "turbo" 7Mz mode? I recently picked up one of these puppies -without OS- and I can't figure the keystrokes, nor are there any DIP switches to adjust this. I've already tried the old XT-clone Control-Alt-Plus combo that worked with XT "turbo" clones, and that one doesn't work. Any suggestions would be appreciated. |
#5
|
|||
|
|||
Casey-
I'll email you the turbo utility. You also might find this interesting.. http://www.atarimagazines.com/creati...versus_IBM.php also somewhere in my antique collection I think I have some old Compaq 5.25 floppy disks. I'll see if I can find them. "Casey Tompkins" wrote in message ... Let's see, in order: David, I have the original keyboard, and the amber mono monitor. It's a very clean system! But no, ctl-alt-esc didn't do anything. I did find out that ctl-alt- switched the monitor down to CGA resolution, and ctl-alt- kicked it back into high-resolution MGA mode. I'm not sure the XT "turbo" program would work, but if you want to email it to me, feel free. Ken, thanks for the suggestion ,but that only works on XT clone systems. You see, Compaq was so intent on being "IBM compatible" that they even wanted their systems to *sound* like IBMs, with keyboard "click" and all. The problem was that those buckling-spring keyboards were *heavy* (and more expensive), so they added a software-driven "key click" sound instead. ctl-alt-plus and ctl-alt-minus increased and decreased the clicking sound on the early Compaqs. On Tue, 26 Oct 2004 12:43:45 GMT, Ken wrote: David wrote: You might also try ctl-alt-esc. Do you have the original keyboard? Not sure, but there may have been a turbo key. You could also try switching it on via software. I have a turbo on/off utility that works on XT's but not sure if it will work on an 8086. "Casey Tompkins" wrote in message ... Wasn't the software command Ctrl+Alt+(Plus sign) to set turbo, and Ctrl+Alt+(Minus sign) for turbo off??? It has been a long time. Here goes: Does anyone know how to switch a Compaq Deskpro 8086 from IBM-compatible 4.77Mz mode to the "turbo" 7Mz mode? I recently picked up one of these puppies -without OS- and I can't figure the keystrokes, nor are there any DIP switches to adjust this. I've already tried the old XT-clone Control-Alt-Plus combo that worked with XT "turbo" clones, and that one doesn't work. Any suggestions would be appreciated. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
hardware compatibility question regarding compaq deskpro 1.0 Ghz | J Santos | Compaq Computers | 4 | September 16th 04 12:46 PM |
hardware compatibility question regarding compaq deskpro 1.0 Ghz | J Santos | Compaq Computers | 0 | September 15th 04 03:38 AM |
hardware compatibility question regarding compaq deskpro 1.0 Ghz | J Santos | Compaq Computers | 2 | September 14th 04 05:43 PM |
Memory Question - outcome of exceeding the memory limits of a machine. | John B. | General | 4 | November 4th 03 01:25 PM |
Compaq Deskpro EN keyboard question | [email protected] | General | 1 | August 11th 03 09:06 AM |