A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Motherboards » Asus Motherboards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Single beep every 14-15 minutes



 
 
Thread Tools Display Modes
  #1  
Old November 22nd 20, 10:09 PM posted to alt.comp.periphs.mainboard.asus
Edward[_7_]
external usenet poster
 
Posts: 17
Default Single beep every 14-15 minutes

I have an Asus Maximus X Hero motherboard. I have the latest version of
Windows 10 installed.
For the last week or so, I heard a single BIOS/motherboard beep I think
every 14-15 minutes, though I only starting keeping track of the time
today. I have checked errors in the event viewer and have not found any
errors at the specific times of the beeps. I have 2 installed Samsung
SSD drives, one that I never use. I copied files to the one I do not
use, and it seems to be find.
Any idea as to what could be causing the beeps or how I can figure it out?
  #2  
Old November 23rd 20, 12:06 AM posted to alt.comp.periphs.mainboard.asus
Paul[_28_]
external usenet poster
 
Posts: 1,467
Default Single beep every 14-15 minutes

Edward wrote:
I have an Asus Maximus X Hero motherboard. I have the latest version of
Windows 10 installed.
For the last week or so, I heard a single BIOS/motherboard beep I think
every 14-15 minutes, though I only starting keeping track of the time
today. I have checked errors in the event viewer and have not found any
errors at the specific times of the beeps. I have 2 installed Samsung
SSD drives, one that I never use. I copied files to the one I do not
use, and it seems to be find.
Any idea as to what could be causing the beeps or how I can figure it out?


Anything showing on the Qcode display ?

There really should not be, as the QCode should go blank
after handoff to the OS.

It could be there is a SMART issue that the BIOS has picked up.

Use an OS loaded on a USB key, to run the system for a test.
During this time, you want at least the two SSDs disconnected
so that any SMART problem cannot be observed by the BIOS code.
With the SSDs disconnected, if there were no beeps, that would
be a sign it was SMART related. If the BIOS is unable to parse
the SMART table properly, it may arrive at a wrong conclusion.

Another kind of problem is CPU overheat.

When observing beeps, the frequency of the audio beep matters too.

The regular BIOS beep codes will all be the same audio frequency.
Abnormal codes, such as overheat, they will be at a different
frequency. (In some cases, a two-tone European police car tone
is used.) Some motherboards used to use a different beep for
USB plugins.

I would in general, not expect to find good information about
beeps in the manual. Even when the manual includes tables, the
tables aren't always up-to-date. My experience is, any kind
of code like that, when a person posts to USENET, and I look
it up, the value is in the Reserved section and is not
documented. You never seem to get codes that happen to be
documented.

You might also want to go back to the BIOS setup screen,
and go through the overclock section, and see if any of the
applied voltages are in the Red zone. Some auto-overclocker
features have been known to use abnormally high voltages.

Paul
  #3  
Old November 23rd 20, 01:29 PM posted to alt.comp.periphs.mainboard.asus
Edward[_7_]
external usenet poster
 
Posts: 17
Default Single beep every 14-15 minutes

On 11/22/2020 5:06 PM, Paul wrote:
Edward wrote:
I have an Asus Maximus X Hero motherboard.Â* I have the latest version
of Windows 10 installed.
For the last week or so, I heard a single BIOS/motherboard beep I
think every 14-15 minutes, though I only starting keeping track of the
time today.Â* I have checked errors in the event viewer and have not
found any errors at the specific times of the beeps.Â* I have 2
installed Samsung SSD drives, one that I never use.Â* I copied files to
the one I do not use, and it seems to be find.
Any idea as to what could be causing the beeps or how I can figure it
out?


Anything showing on the Qcode display ?

There really should not be, as the QCode should go blank
after handoff to the OS.

It could be there is a SMART issue that the BIOS has picked up.

Use an OS loaded on a USB key, to run the system for a test.
During this time, you want at least the two SSDs disconnected
so that any SMART problem cannot be observed by the BIOS code.
With the SSDs disconnected, if there were no beeps, that would
be a sign it was SMART related. If the BIOS is unable to parse
the SMART table properly, it may arrive at a wrong conclusion.

Another kind of problem is CPU overheat.

When observing beeps, the frequency of the audio beep matters too.

The regular BIOS beep codes will all be the same audio frequency.
Abnormal codes, such as overheat, they will be at a different
frequency. (In some cases, a two-tone European police car tone
is used.) Some motherboards used to use a different beep for
USB plugins.

I would in general, not expect to find good information about
beeps in the manual. Even when the manual includes tables, the
tables aren't always up-to-date. My experience is, any kind
of code like that, when a person posts to USENET, and I look
it up, the value is in the Reserved section and is not
documented. You never seem to get codes that happen to be
documented.

You might also want to go back to the BIOS setup screen,
and go through the overclock section, and see if any of the
applied voltages are in the Red zone. Some auto-overclocker
features have been known to use abnormally high voltages.

Â*Â* Paul

Thanks, Paul! I'll try your suggestions and see what I can find. I
really appreciate your help.

  #4  
Old November 23rd 20, 01:30 PM posted to alt.comp.periphs.mainboard.asus
Edward[_7_]
external usenet poster
 
Posts: 17
Default Single beep every 14-15 minutes

On 11/22/2020 5:06 PM, Paul wrote:
Edward wrote:
I have an Asus Maximus X Hero motherboard.Â* I have the latest version
of Windows 10 installed.
For the last week or so, I heard a single BIOS/motherboard beep I
think every 14-15 minutes, though I only starting keeping track of the
time today.Â* I have checked errors in the event viewer and have not
found any errors at the specific times of the beeps.Â* I have 2
installed Samsung SSD drives, one that I never use.Â* I copied files to
the one I do not use, and it seems to be find.
Any idea as to what could be causing the beeps or how I can figure it
out?


Anything showing on the Qcode display ?

There really should not be, as the QCode should go blank
after handoff to the OS.

It could be there is a SMART issue that the BIOS has picked up.

Use an OS loaded on a USB key, to run the system for a test.
During this time, you want at least the two SSDs disconnected
so that any SMART problem cannot be observed by the BIOS code.
With the SSDs disconnected, if there were no beeps, that would
be a sign it was SMART related. If the BIOS is unable to parse
the SMART table properly, it may arrive at a wrong conclusion.

Another kind of problem is CPU overheat.

When observing beeps, the frequency of the audio beep matters too.

The regular BIOS beep codes will all be the same audio frequency.
Abnormal codes, such as overheat, they will be at a different
frequency. (In some cases, a two-tone European police car tone
is used.) Some motherboards used to use a different beep for
USB plugins.

I would in general, not expect to find good information about
beeps in the manual. Even when the manual includes tables, the
tables aren't always up-to-date. My experience is, any kind
of code like that, when a person posts to USENET, and I look
it up, the value is in the Reserved section and is not
documented. You never seem to get codes that happen to be
documented.

You might also want to go back to the BIOS setup screen,
and go through the overclock section, and see if any of the
applied voltages are in the Red zone. Some auto-overclocker
features have been known to use abnormally high voltages.

Â*Â* Paul

Thanks, Paul! I'll try your suggestions and see what I can find. I
really appreciate your help.

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
A7V shuts down immediately at boot-up (single long beep) JY Asus Motherboards 1 July 18th 05 05:09 PM
single loud BEEP Pete General 8 June 13th 05 09:12 PM
Single Beep Error Message Tom Mc Overclocking AMD Processors 2 December 8th 03 03:01 AM
Single Beep Error Message Tom Mc AMD Thunderbird Processors 2 December 8th 03 03:01 AM
A7V133-VM + PCI video = BEEP BEEP BEEP BEEP? Lost Asus Motherboards 2 November 13th 03 06:33 AM


All times are GMT +1. The time now is 11:13 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.