ABIT NF7-S 2.0 and mobile Barton 2500 how much overclock ?

2200 ??? your not trying and it aint an overclock do 2.5 and ill
consider it an overclock :0


On Wed, 23 Jun 2004 14:11:06 -0400, "ICee"
wrote:

Scott Backular wrote:
Ive been reading on google and yes you can fit it iot means cutting
the clip and pushing a Capacitor out of the way but you can fit it.

I will be very CAREFULL doing it.

Ive got a Vantec AeroFlow for a backup if my nerves fail me, that will
keep the board going long enough for me to get a Thermalright Sp97
have no idea if they will fit hope so

I have the Vantec AeroFlow on my system as well (NF7-S, XP1700+ o/c to
2200 MHz, FSB 220 MHz). Very quiet and cools very well. The NF7-S is a
great overclocking (or otherwise) MB.


On Wed, 23 Jun 2004 12:45:37 -0400, "ICee"
wrote:

ICee wrote:
ICee wrote:
Scott Backular wrote:
Zalman site says i can't fit it though ??, must have Caps in the
way or somthing ?

Does not say why ?

There's no way to mount it to the CPU or motherboard from what I've
seen of it. A review I read said that it will only fit Intel P4
MB's and Athlon64 MB's.

Ok, I see there is an adaptor for mounting it on a socket A MB.
This review mentions that the early version of the NF7-S (rev
1.0,1.2) doesn't have mounting holes, but the rev 2.0 MB does.
Whether there is room to mount it, I couldn't say.
http://www.digital-daily.com/cooling/zalman-7000a/

Found this compatibility chart, and according to it, the 7000a won't
fit the NF7 series MB's. It must be because of caps or the NB
heatsink being in the way.

http://zalman.co.kr/product/cooler/7..._list_eng.html