A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » Printers
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

HS PSC 1600v all in one printer



 
 
Thread Tools Display Modes
  #1  
Old August 23rd 07, 01:49 AM posted to comp.periphs.printers
cindymaria
external usenet poster
 
Posts: 3
Default HS PSC 1600v all in one printer

Hi,

I have a non-working printer that has a short in the connector tape
behind the control panel display.

Any suggestions for fixing this on my own?

Cindy Maria

  #2  
Old August 23rd 07, 02:13 AM posted to comp.periphs.printers
Rev.GGWillikers
external usenet poster
 
Posts: 4
Default HS PSC 1600v all in one printer

cindymaria wrote:
Hi,

I have a non-working printer that has a short in the connector tape
behind the control panel display.

Any suggestions for fixing this on my own?

Cindy Maria

Umm, new connector tape
  #3  
Old August 23rd 07, 11:30 AM posted to comp.periphs.printers
cindymaria
external usenet poster
 
Posts: 3
Default HS PSC 1600v all in one printer

Certainly, new connector is an obvious answer!!

I should have been more specific, as I the places that I shop as a non-
tech person such as grocery and department stores don't sell the
connector tape. Also should have mentioned, I was wanting if know if
it could be fixed without replacing the whole control panel.

Anyway, we have gotten the printer fixed rather quickly, and I do
thank you for you reply.

Cindy Maria


On Aug 22, 8:13 pm, "Rev.GGWillikers"
wrote:
cindymaria wrote:
Hi,


I have a non-working printer that has a short in the connector tape
behind the control panel display.


Any suggestions for fixing this on my own?


Cindy Maria


Umm, new connector tape



  #4  
Old August 23rd 07, 03:41 PM posted to comp.periphs.printers
Gary Tait
external usenet poster
 
Posts: 127
Default HS PSC 1600v all in one printer

cindymaria wrote in news:1187865027.354014.31380
@q3g2000prf.googlegroups.com:

Certainly, new connector is an obvious answer!!

I should have been more specific, as I the places that I shop as a non-
tech person such as grocery and department stores don't sell the
connector tape. Also should have mentioned, I was wanting if know if
it could be fixed without replacing the whole control panel.

Anyway, we have gotten the printer fixed rather quickly, and I do
thank you for you reply.

Cindy Maria


Yes, with the right tech that knows how to play by ear and actually repair
things, rather than replace assemblies. I am one of those techs.

I did that with one of my old printers. I replaced its original mebrane
based control panel with a real PCB, real buttons, and real wires to the
mainboard.
  #5  
Old August 24th 07, 01:08 AM posted to comp.periphs.printers
TJ
external usenet poster
 
Posts: 472
Default HS PSC 1600v all in one printer

Gary Tait wrote:
cindymaria wrote in news:1187865027.354014.31380
@q3g2000prf.googlegroups.com:

Certainly, new connector is an obvious answer!!

I should have been more specific, as I the places that I shop as a non-
tech person such as grocery and department stores don't sell the
connector tape. Also should have mentioned, I was wanting if know if
it could be fixed without replacing the whole control panel.

Anyway, we have gotten the printer fixed rather quickly, and I do
thank you for you reply.

Cindy Maria


Yes, with the right tech that knows how to play by ear and actually repair
things, rather than replace assemblies. I am one of those techs.

I did that with one of my old printers. I replaced its original mebrane
based control panel with a real PCB, real buttons, and real wires to the
mainboard.


Weren't you afraid of voiding your warranty? If using non-OEM ink will
void it, THAT certainly will. I know our resident troll has expressed
his fear of voiding the warranty on his old Canon many times. grin

No, I'm not serious. I've been known to customize a bit here and there
myself.

TJ

TJ

--
Posted via a free Usenet account from http://www.teranews.com

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Please recommend a printer and printer type for everyday office use as well as heavy card [email protected] Printers 7 August 5th 06 10:12 PM
Any *good* printer drivers for the HP Photosmart 7550 photo printer in the MAC format? Curious Printers 1 April 3rd 05 08:29 AM
Add Printer Wizard starts to hang after installation of Dell/Lexmark printer Eugene Printers 0 December 5th 04 10:42 PM
Unable to print from old NEC SuperScript 870 printer after installing HP DeskJet 450 mobile printer driver. [email protected] Printers 1 April 13th 04 12:28 AM


All times are GMT +1. The time now is 09:09 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.