If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
tv tuner on older aiw
Hi everyone,
I'm on winxp pro sp2 stripped to the bones with directx 9.0c, equipped with aiw radeon 7500, its own drivers, and mmc 7.5 just set up very well. I can not find a workaround for my ati tv to work. It always says tv player failed to initialize the video. The drop down video capture source list shows no default, driver is listed as unsupported, but system compatibility check DOES NOT says something about problems encountered. I checked all other mmc features and they work just very fine: dvd, player and cd. I enabled DCOM features on my computer, too. Where do you think the problem resides ? Any help will be greatly appreciated. |
#2
|
|||
|
|||
tv tuner on older aiw
MMC 7.5 is too old, try the following :
Catalyst 5.11 Windows XP Drivers With Control Panel ATI Multimedia Center 9.02 Suite "OR" ATI Multimedia Center 9.03 Suite Kim wrote in message ... Hi everyone, I'm on winxp pro sp2 stripped to the bones with directx 9.0c, equipped with aiw radeon 7500, its own drivers, and mmc 7.5 just set up very well. I can not find a workaround for my ati tv to work. It always says tv player failed to initialize the video. The drop down video capture source list shows no default, driver is listed as unsupported, but system compatibility check DOES NOT says something about problems encountered. I checked all other mmc features and they work just very fine: dvd, player and cd. I enabled DCOM features on my computer, too. Where do you think the problem resides ? Any help will be greatly appreciated. |
#3
|
|||
|
|||
tv tuner on older aiw
Thanks about your reply. I did clean install 5.11 and mmc 9.02 and the messages are the same except: Directx components are not installed properly. But dxdiag tells me 9.0c is present. Can DirectX be installed over DirectX ? Le Sun, 06 Aug 2006 15:28:16 GMT, dans alt.comp.periphs.videocards.ati, "Ted F" a écrit : MMC 7.5 is too old, try the following : Catalyst 5.11 Windows XP Drivers With Control Panel ATI Multimedia Center 9.02 Suite "OR" ATI Multimedia Center 9.03 Suite Kim wrote in message ... Hi everyone, I'm on winxp pro sp2 stripped to the bones with directx 9.0c, equipped with aiw radeon 7500, its own drivers, and mmc 7.5 just set up very well. I can not find a workaround for my ati tv to work. It always says tv player failed to initialize the video. The drop down video capture source list shows no default, driver is listed as unsupported, but system compatibility check DOES NOT says something about problems encountered. I checked all other mmc features and they work just very fine: dvd, player and cd. I enabled DCOM features on my computer, too. Where do you think the problem resides ? Any help will be greatly appreciated. |
#4
|
|||
|
|||
tv tuner on older aiw
"Ted F" wrote in message ... Yes, Directx can be reinstalled over the old, go to microsoft's website to download Directx 9.0c and install. http://www.microsoft.com/windows/directx/default.mspx Kim wrote in message ... Thanks about your reply. I did clean install 5.11 and mmc 9.02 and the messages are the same except: Directx components are not installed properly. But dxdiag tells me 9.0c is present. Can DirectX be installed over DirectX ? Le Sun, 06 Aug 2006 15:28:16 GMT, dans alt.comp.periphs.videocards.ati, "Ted F" a écrit : MMC 7.5 is too old, try the following : Catalyst 5.11 Windows XP Drivers With Control Panel ATI Multimedia Center 9.02 Suite "OR" ATI Multimedia Center 9.03 Suite Kim wrote in message ... Hi everyone, I'm on winxp pro sp2 stripped to the bones with directx 9.0c, equipped with aiw radeon 7500, its own drivers, and mmc 7.5 just set up very well. I can not find a workaround for my ati tv to work. It always says tv player failed to initialize the video. The drop down video capture source list shows no default, driver is listed as unsupported, but system compatibility check DOES NOT says something about problems encountered. I checked all other mmc features and they work just very fine: dvd, player and cd. I enabled DCOM features on my computer, too. Where do you think the problem resides ? Any help will be greatly appreciated. If not DirectX then maybe WDM drivers. Looks like the ATI download page for XP's readme file shows Catalyst 6.5 for the aiw 7500. |
#5
|
|||
|
|||
tv tuner on older aiw
Le Sun, 06 Aug 2006 20:22:20 GMT, dans alt.comp.periphs.videocards.ati, "Danny G."
a écrit : "Ted F" wrote in message ... Yes, Directx can be reinstalled over the old, go to microsoft's website to download Directx 9.0c and install. http://www.microsoft.com/windows/directx/default.mspx Kim wrote in message ... Thanks about your reply. I did clean install 5.11 and mmc 9.02 and the messages are the same except: Directx components are not installed properly. But dxdiag tells me 9.0c is present. Can DirectX be installed over DirectX ? Le Sun, 06 Aug 2006 15:28:16 GMT, dans alt.comp.periphs.videocards.ati, "Ted F" a écrit : MMC 7.5 is too old, try the following : Catalyst 5.11 Windows XP Drivers With Control Panel ATI Multimedia Center 9.02 Suite "OR" ATI Multimedia Center 9.03 Suite Kim wrote in message ... Hi everyone, I'm on winxp pro sp2 stripped to the bones with directx 9.0c, equipped with aiw radeon 7500, its own drivers, and mmc 7.5 just set up very well. I can not find a workaround for my ati tv to work. It always says tv player failed to initialize the video. The drop down video capture source list shows no default, driver is listed as unsupported, but system compatibility check DOES NOT says something about problems encountered. I checked all other mmc features and they work just very fine: dvd, player and cd. I enabled DCOM features on my computer, too. Where do you think the problem resides ? Any help will be greatly appreciated. If not DirectX then maybe WDM drivers. Looks like the ATI download page for XP's readme file shows Catalyst 6.5 for the aiw 7500. Thanks a lot everyone, I've been trying win2000, win xp, and win xp mce with different drivers, and not a single success in starting ati tv occured. Last week the tv tuner was still working fine, it really looks like the board did crash the tuner itself. In a last attempt i'll reset aiw radeon bios up, have you heard of a place to get those ? Kim |
#6
|
|||
|
|||
tv tuner on older aiw
Here's the website to get ATI BIOS flash files. Use with ""CAUTION""
http://www.techpowerup.com/bios/ Kim wrote in message ... Le Sun, 06 Aug 2006 20:22:20 GMT, dans alt.comp.periphs.videocards.ati, "Danny G." a écrit : "Ted F" wrote in message ... Yes, Directx can be reinstalled over the old, go to microsoft's website to download Directx 9.0c and install. http://www.microsoft.com/windows/directx/default.mspx Kim wrote in message ... Thanks about your reply. I did clean install 5.11 and mmc 9.02 and the messages are the same except: Directx components are not installed properly. But dxdiag tells me 9.0c is present. Can DirectX be installed over DirectX ? Le Sun, 06 Aug 2006 15:28:16 GMT, dans alt.comp.periphs.videocards.ati, "Ted F" a écrit : MMC 7.5 is too old, try the following : Catalyst 5.11 Windows XP Drivers With Control Panel ATI Multimedia Center 9.02 Suite "OR" ATI Multimedia Center 9.03 Suite Kim wrote in message om... Hi everyone, I'm on winxp pro sp2 stripped to the bones with directx 9.0c, equipped with aiw radeon 7500, its own drivers, and mmc 7.5 just set up very well. I can not find a workaround for my ati tv to work. It always says tv player failed to initialize the video. The drop down video capture source list shows no default, driver is listed as unsupported, but system compatibility check DOES NOT says something about problems encountered. I checked all other mmc features and they work just very fine: dvd, player and cd. I enabled DCOM features on my computer, too. Where do you think the problem resides ? Any help will be greatly appreciated. If not DirectX then maybe WDM drivers. Looks like the ATI download page for XP's readme file shows Catalyst 6.5 for the aiw 7500. Thanks a lot everyone, I've been trying win2000, win xp, and win xp mce with different drivers, and not a single success in starting ati tv occured. Last week the tv tuner was still working fine, it really looks like the board did crash the tuner itself. In a last attempt i'll reset aiw radeon bios up, have you heard of a place to get those ? Kim |
#7
|
|||
|
|||
tv tuner on older aiw
Kim wrote in message ... Le Sun, 06 Aug 2006 20:22:20 GMT, dans alt.comp.periphs.videocards.ati, "Danny G." a écrit : "Ted F" wrote in message ... Yes, Directx can be reinstalled over the old, go to microsoft's website to download Directx 9.0c and install. http://www.microsoft.com/windows/directx/default.mspx Kim wrote in message ... Thanks about your reply. I did clean install 5.11 and mmc 9.02 and the messages are the same except: Directx components are not installed properly. But dxdiag tells me 9.0c is present. Can DirectX be installed over DirectX ? Le Sun, 06 Aug 2006 15:28:16 GMT, dans alt.comp.periphs.videocards.ati, "Ted F" a écrit : MMC 7.5 is too old, try the following : Catalyst 5.11 Windows XP Drivers With Control Panel ATI Multimedia Center 9.02 Suite "OR" ATI Multimedia Center 9.03 Suite Kim wrote in message ... Hi everyone, I'm on winxp pro sp2 stripped to the bones with directx 9.0c, equipped with aiw radeon 7500, its own drivers, and mmc 7.5 just set up very well. I can not find a workaround for my ati tv to work. It always says tv player failed to initialize the video. The drop down video capture source list shows no default, driver is listed as unsupported, but system compatibility check DOES NOT says something about problems encountered. I checked all other mmc features and they work just very fine: dvd, player and cd. I enabled DCOM features on my computer, too. Where do you think the problem resides ? Any help will be greatly appreciated. If not DirectX then maybe WDM drivers. Looks like the ATI download page for XP's readme file shows Catalyst 6.5 for the aiw 7500. Thanks a lot everyone, I've been trying win2000, win xp, and win xp mce with different drivers, and not a single success in starting ati tv occured. Last week the tv tuner was still working fine, it really looks like the board did crash the tuner itself. In a last attempt i'll reset aiw radeon bios up, have you heard of a place to get those ? Kim eek, Doing a clean install and updates to all the software in any one of those OS is a big project. How in the world you could have correctly installed and tested the card and all software three times in a few days like that is beyond me. Maybe these knowledgebase articles at http://ati.com will help. 737-20561: Removing Old ATI Software 737-20429: Installing the Display Drivers 737-20913: How to Find the Drivers and Software for Your Product 737-20905: Uninstalling the Previous Multimedia Center Software 737-63: Troubleshooting "TV Player Failed to Initialize the Video" Error Message GL Dan |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TV Tuner for Windows Media Center Laptop | journey | Dell Computers | 12 | March 11th 06 03:49 AM |
TV Tuner Help | Robbie McFerren | Homebuilt PC's | 23 | February 7th 06 02:56 PM |
New computer slower than older computer... | Tony Rae | Asus Motherboards | 9 | August 18th 05 06:57 AM |
AIW ATI 9600 FM Tuner Not working | Stan | Ati Videocards | 1 | April 2nd 04 04:53 PM |
Need your advice on a TV tuner card | RoamDog | Ati Videocards | 7 | December 20th 03 11:41 PM |