If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Opinions Needed!
I need to upgrade my mother board. I'm currently using an MSI KT4V and I've
decided to choose between a few boards. I'm looking for opinions about these boards. I primarily am looking for performance and stability. Abit NF7-S rev 2.0 MSI KT6 Delta Asus A7N8X (not deluxe) TIA for all of you who help me out. |
#2
|
|||
|
|||
Mark wrote:
I need to upgrade my mother board. I'm currently using an MSI KT4V and I've decided to choose between a few boards. I'm looking for opinions about these boards. I primarily am looking for performance and stability. Abit NF7-S rev 2.0 MSI KT6 Delta Asus A7N8X (not deluxe) Why go for the Abit with the bells and whistles, but not the Asus? Do you want SATA/RAID/Audio/Firewire onboard or not really? Which MSI were you looking at? There are about 4 different versions with varying amounts of onboard stuff. All of those boards are very good, you won't be disappointed with any of them. I have an A7N8X Deluxe Rev 2.0 and it's excellent, I thoroughly recommend an nForce board, MSI do some as well (K7N2 Delta). I always used to steer clear of motherboards with lots of stuff on, but they are genuinely really good... I'm extremely impressed by the Soundstorm Audio. Ben -- A7N8X FAQ: www.ben.pope.name/a7n8x_faq.html Questions by email will likely be ignored, please use the newsgroups. I'm not just a number. To many, I'm known as a String... |
#3
|
|||
|
|||
Mark wrote: I need to upgrade my mother board. I'm currently using an MSI KT4V and I've decided to choose between a few boards. I'm looking for opinions about these boards. I primarily am looking for performance and stability. Abit NF7-S rev 2.0 MSI KT6 Delta Asus A7N8X (not deluxe) TIA for all of you who help me out. If you don't need sata or raid I'd use an Epox 8RDA3I. Imo Epox are very good quality and very stable even when oc'd. I don't have any experience with the others so I couldn't say. The only thing I know is there was a lot of bitchin' about Abit boards on the groups a while back. Something about almost all of them having been assembled with bad capacitors. That was enough to keep me from buying them. The latest stuff on the NF7 have been rave reviews, I guess time will tell. Roger |
#4
|
|||
|
|||
Roger M wrote:
If you don't need sata or raid I'd use an Epox 8RDA3I. Imo Epox are very good quality and very stable even when oc'd. I don't have any experience with the others so I couldn't say. The only thing I know is there was a lot of bitchin' about Abit boards on the groups a while back. Something about almost all of them having been assembled with bad capacitors. That was enough to keep me from buying them. The latest stuff on the NF7 have been rave reviews, I guess time will tell. Sounds like the era of the BE6-II (and the BP6 IIRC) which was a while ago (mid '99?). Many of the Taiwanese manufacturers were affected, not just Abit. I'm under the impression that it was a bunch of mislabelled capacitors, so not really the motherboard manufacturers fault. Ben -- A7N8X FAQ: www.ben.pope.name/a7n8x_faq.html Questions by email will likely be ignored, please use the newsgroups. I'm not just a number. To many, I'm known as a String... |
#5
|
|||
|
|||
The following are all NF2 boards.
For best sound - Epox 8rda+ 2.1 (good price, too) - even beats the NF7-S2. For best overclockability - NF7-S2 (runs my 2800+ at 2.55 GHz) Next best all-rounder - DFI Ultra "Ben Pope" wrote in message ... Mark wrote: I need to upgrade my mother board. I'm currently using an MSI KT4V and I've decided to choose between a few boards. I'm looking for opinions about these boards. I primarily am looking for performance and stability. Abit NF7-S rev 2.0 MSI KT6 Delta Asus A7N8X (not deluxe) Why go for the Abit with the bells and whistles, but not the Asus? Do you want SATA/RAID/Audio/Firewire onboard or not really? Which MSI were you looking at? There are about 4 different versions with varying amounts of onboard stuff. All of those boards are very good, you won't be disappointed with any of them. I have an A7N8X Deluxe Rev 2.0 and it's excellent, I thoroughly recommend an nForce board, MSI do some as well (K7N2 Delta). I always used to steer clear of motherboards with lots of stuff on, but they are genuinely really good... I'm extremely impressed by the Soundstorm Audio. Ben -- A7N8X FAQ: www.ben.pope.name/a7n8x_faq.html Questions by email will likely be ignored, please use the newsgroups. I'm not just a number. To many, I'm known as a String... |
#6
|
|||
|
|||
"Ben Pope" wrote in message
... Roger M wrote: If you don't need sata or raid I'd use an Epox 8RDA3I. Imo Epox are very good quality and very stable even when oc'd. I don't have any experience with the others so I couldn't say. The only thing I know is there was a lot of bitchin' about Abit boards on the groups a while back. Something about almost all of them having been assembled with bad capacitors. That was enough to keep me from buying them. The latest stuff on the NF7 have been rave reviews, I guess time will tell. Sounds like the era of the BE6-II (and the BP6 IIRC) which was a while ago (mid '99?). Many of the Taiwanese manufacturers were affected, not just Abit. I'm under the impression that it was a bunch of mislabelled capacitors, so not really the motherboard manufacturers fault. Funny you should mention the BP6, I'm using a trusty dual 500 MHz right now It's time to upgrade, and it seems like the right time for the products and prices that are out there. So far, it looks like it's going to be: Abit NF7-S Revision 2.0 AMD Athlon XP 2500+ Crucial PC3200 512 MB DDR Thermalright SLK900-A Vantec 80x38 Tornado I want to build an upgradable, overclockable system. Overclock to 2.1 GHz, maybe buy another 512 MB down the road and enable dual channel. -- Mike |
#7
|
|||
|
|||
Vis Mike wrote:
It's time to upgrade, and it seems like the right time for the products and prices that are out there. So far, it looks like it's going to be: Abit NF7-S Revision 2.0 AMD Athlon XP 2500+ Crucial PC3200 512 MB DDR Thermalright SLK900-A Vantec 80x38 Tornado I want to build an upgradable, overclockable system. Overclock to 2.1 GHz, maybe buy another 512 MB down the road and enable dual channel. Well in terms of upgradeability... Socket A is nearing it's end of life. AMD say they'll be supporting it for another year or so... not sure if they'll be releasing any faster chips or not. Not that the above system is a bad choice, just don't expect more than around 2.0-2.2GHz. Ben -- A7N8X FAQ: www.ben.pope.name/a7n8x_faq.html Questions by email will likely be ignored, please use the newsgroups. I'm not just a number. To many, I'm known as a String... |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Building a new system ... asking for opinions | Robert TV | General | 2 | August 10th 04 09:51 PM |
250 watt and ATX 2.1 needed to kep xp 2000 board running ? | We Live for the One we Die for the One | Overclocking | 0 | May 31st 04 02:38 PM |
Opinions needed on a Chaintech motherboard.... | Darth Joules | Overclocking AMD Processors | 1 | December 12th 03 12:43 AM |
Opinions on this DVD Burner | Buck Turgidson | General | 0 | December 4th 03 11:51 AM |
Need your opinions on these systems | Pen | General | 4 | July 18th 03 01:07 PM |