If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Need drivers for Gateway e-4000
I just bought a used Gateway e-4000 from a reseller. It came complete
except for the harddrive, and the external stuff (keyboard, monitor, mouse). This particular computer came from the factory with Windows 2000 and has the registration numbers on a label. I have always used Windows98 on my old computers. I am planning to begin using Linux in the future, so I am not going to waste the money on buying XP, which will likely be abandoned soon anyhow. But I do have a legal copy of both 98 and 2000, so I'll install one or the other. I just installed a hard drive, formatted it and booted it to Dos. Now I'm ready to install Windows. The problem is that I can not find the drivers anywhere. I went to gateway.com, was referred to mpccorp.com. They have every model listed but skip the e-4000. The closest is e-4100. I tried their "enter serial number", and it was not found. I sent them an email and got no reply. I called them, and after a big runaround I was told that this computer is out of warranty and I'll have to subscribe and pay by the minute. All I want are the frikkin drivers, and was hoping to also download a PDF manual too. Does anyone know where to get them? (What is the key for getting into the Bios too). Here are the specs. Gateway e series Model: flexatxskh esx e4000 Serial: 0029773609 -or- GTW0029773609 Dated: 2/25/03 Thanks for all help Jim |
#2
|
|||
|
|||
Need drivers for Gateway e-4000
According to this article, it looks like the 4000 and the 4100 are close
enough to use the same drivers: http://www.smartergeek.com/blog/2008...000-and-xp.asp Here are some of them: http://support.mpccorp.com/apps/filelist.asp?ID=18140 Can't say for certain about getting into BIOS, but my notebook is F2 to get in. SC Tom "Jimw" wrote in message news I just bought a used Gateway e-4000 from a reseller. It came complete except for the harddrive, and the external stuff (keyboard, monitor, mouse). This particular computer came from the factory with Windows 2000 and has the registration numbers on a label. I have always used Windows98 on my old computers. I am planning to begin using Linux in the future, so I am not going to waste the money on buying XP, which will likely be abandoned soon anyhow. But I do have a legal copy of both 98 and 2000, so I'll install one or the other. I just installed a hard drive, formatted it and booted it to Dos. Now I'm ready to install Windows. The problem is that I can not find the drivers anywhere. I went to gateway.com, was referred to mpccorp.com. They have every model listed but skip the e-4000. The closest is e-4100. I tried their "enter serial number", and it was not found. I sent them an email and got no reply. I called them, and after a big runaround I was told that this computer is out of warranty and I'll have to subscribe and pay by the minute. All I want are the frikkin drivers, and was hoping to also download a PDF manual too. Does anyone know where to get them? (What is the key for getting into the Bios too). Here are the specs. Gateway e series Model: flexatxskh esx e4000 Serial: 0029773609 -or- GTW0029773609 Dated: 2/25/03 Thanks for all help Jim |
#3
|
|||
|
|||
Need drivers for Gateway e-4000
SC Tom wrote:
According to this article, it looks like the 4000 and the 4100 are close enough to use the same drivers: http://www.smartergeek.com/blog/2008...000-and-xp.asp Here are some of them: http://support.mpccorp.com/apps/filelist.asp?ID=18140 Can't say for certain about getting into BIOS, but my notebook is F2 to get in. SC Tom "Jimw" wrote in message news I just bought a used Gateway e-4000 from a reseller. It came complete except for the harddrive, and the external stuff (keyboard, monitor, mouse). This particular computer came from the factory with Windows 2000 and has the registration numbers on a label. I have always used Windows98 on my old computers. I am planning to begin using Linux in the future, so I am not going to waste the money on buying XP, which will likely be abandoned soon anyhow. But I do have a legal copy of both 98 and 2000, so I'll install one or the other. I just installed a hard drive, formatted it and booted it to Dos. Now I'm ready to install Windows. The problem is that I can not find the drivers anywhere. I went to gateway.com, was referred to mpccorp.com. They have every model listed but skip the e-4000. The closest is e-4100. I tried their "enter serial number", and it was not found. I sent them an email and got no reply. I called them, and after a big runaround I was told that this computer is out of warranty and I'll have to subscribe and pay by the minute. All I want are the frikkin drivers, and was hoping to also download a PDF manual too. Does anyone know where to get them? (What is the key for getting into the Bios too). Here are the specs. Gateway e series Model: flexatxskh esx e4000 Serial: 0029773609 -or- GTW0029773609 Dated: 2/25/03 Thanks for all help Jim Agreed. Those drivers are close enough. The 4100 uses an Intel 865 chipset, ever so slightly advanced over the 845. SoundMax and Intel Ethernet are the same between the two, and it is likely that the 865-oriented video drivers will install properly, too. I have never tried installing 865 drivers on an 845 machine, but I have a similar experiment planned for tomorrow or the weekend, to deal some upgrade and replacement scenarios among my clients... Ben |
#4
|
|||
|
|||
Need drivers for Gateway e-4000
Not all of the drivers will work. You will at least have to load the correct
4000 video drivers. My employer uses both E-4000 and E-4100 computers. When I get a chance, I will copy the drivers that we have for the 4000. I know we have the original discs for them. We have probably a hundred computers or so of each model. Both the 4000 and 4100s are excellent machines, except that the 4100 has a problem with motherboard capacitors going out. I have replaced all the caps in most of our 4100s. I'll try to find our drivers. Maybe I can make an ISO of the driver CD. There may even be a manual on that CD. -Nelson "SC Tom" wrote in message ... According to this article, it looks like the 4000 and the 4100 are close enough to use the same drivers: http://www.smartergeek.com/blog/2008...000-and-xp.asp Here are some of them: http://support.mpccorp.com/apps/filelist.asp?ID=18140 Can't say for certain about getting into BIOS, but my notebook is F2 to get in. SC Tom |
#5
|
|||
|
|||
Need drivers for Gateway e-4000
Nelson Ogden wrote:
Not all of the drivers will work. You will at least have to load the correct 4000 video drivers. My employer uses both E-4000 and E-4100 computers. When I get a chance, I will copy the drivers that we have for the 4000. I know we have the original discs for them. We have probably a hundred computers or so of each model. Both the 4000 and 4100s are excellent machines, except that the 4100 has a problem with motherboard capacitors going out. I have replaced all the caps in most of our 4100s. I'll try to find our drivers. Maybe I can make an ISO of the driver CD. There may even be a manual on that CD. -Nelson "SC Tom" wrote in message ... According to this article, it looks like the 4000 and the 4100 are close enough to use the same drivers: http://www.smartergeek.com/blog/2008...000-and-xp.asp Here are some of them: http://support.mpccorp.com/apps/filelist.asp?ID=18140 Can't say for certain about getting into BIOS, but my notebook is F2 to get in. SC Tom Video and chipset drivers are different between the 4000 (845 chipset) and the 4100 (865). The 865 chipset drivers downloaded from the INTEL web site are more comprehensive than whatever might be on the Gateway web site, and work also with the 845. But while at the Intel web site, one might as well download the 845 drivers... Ben Myers |
#6
|
|||
|
|||
Need drivers for Gateway e-4000
Jim, I made ISOs of our discs for the E-4000 if you still need them.
Here is what I have: Applications Disc #1 (654 MB): http://www.ocsnetwork.net/etc/usenet/e4000/apps1.iso Applications Disc #2 (30 MB): http://www.ocsnetwork.net/etc/usenet/e4000/apps2.iso Documentation CD (89 MB): http://www.ocsnetwork.net/etc/usenet/e4000/docs.iso Driver CD (201 MB, WinRar Format): http://www.ocsnetwork.net/etc/usenet/e4000/drivers.rar Windows 2000 Install CD (367 MB): http://www.ocsnetwork.net/etc/usenet/e4000/w2ksp2.iso Let me know if this works. Also let me know when you have finished downloading what you need because I don't have much space on my server. I will leave them up as long as I can in case anyone else needs them, though. I would recommend staying with Windows 2000 or Windows XP. This computer is plenty powerful enough to handle either of these OS'es. You will have to extract the drivers CD ISO with WinRar. I was able to compress it so it would download faster. Let me know if you have any questions. Have fun, Nelson |
#7
|
|||
|
|||
Need drivers for Gateway e-4000
Hi Nelson
Thanks so much for this help. I'm on dialup so downloading these is just not possible. I live in a rural area and that is all we have here. On the other hand, I have a friend in the city who has high speed. I will try to contact him tomorrow and have him download them and burn me CDs. I just installed PC-Linux on it and it works, but even for that I need the video drivers because I am not getting the correct resolution. I can now install both Linux and Win2000 when I get it all together. I kind of like Linux, but it's hard to get used to. I'll let you know when my friend gets these. Thanks so much !!! I'm glad I dont have the 4100 if it has that cap problem. Seems to be a problem on many newer motherboards. I had one older MB go up in smoke some years ago from that. Whaty amazes me is that many old tube radios and tvs from the 1950s thru 90's still work fine with their old caps, as well as the old computers from the 80s. They just dont make anything good anymore !!! Heck these computers are less than 5 years old. Of course I know these are cheap imported junk caps. Thanks again !!!! Jim On Tue, 10 Mar 2009 19:56:16 -0500, "Nelson Ogden" wrote: Jim, I made ISOs of our discs for the E-4000 if you still need them. Here is what I have: Applications Disc #1 (654 MB): http://www.ocsnetwork.net/etc/usenet/e4000/apps1.iso Applications Disc #2 (30 MB): http://www.ocsnetwork.net/etc/usenet/e4000/apps2.iso Documentation CD (89 MB): http://www.ocsnetwork.net/etc/usenet/e4000/docs.iso Driver CD (201 MB, WinRar Format): http://www.ocsnetwork.net/etc/usenet/e4000/drivers.rar Windows 2000 Install CD (367 MB): http://www.ocsnetwork.net/etc/usenet/e4000/w2ksp2.iso Let me know if this works. Also let me know when you have finished downloading what you need because I don't have much space on my server. I will leave them up as long as I can in case anyone else needs them, though. I would recommend staying with Windows 2000 or Windows XP. This computer is plenty powerful enough to handle either of these OS'es. You will have to extract the drivers CD ISO with WinRar. I was able to compress it so it would download faster. Let me know if you have any questions. Have fun, Nelson |
#8
|
|||
|
|||
ATTN NELSON (was: Need drivers for Gateway e-4000)
On Tue, 10 Mar 2009 19:56:16 -0500, "Nelson Ogden"
wrote: Jim, I made ISOs of our discs for the E-4000 if you still need them. Here is what I have: Applications Disc #1 (654 MB): http://www.ocsnetwork.net/etc/usenet/e4000/apps1.iso Applications Disc #2 (30 MB): http://www.ocsnetwork.net/etc/usenet/e4000/apps2.iso Documentation CD (89 MB): http://www.ocsnetwork.net/etc/usenet/e4000/docs.iso Driver CD (201 MB, WinRar Format): http://www.ocsnetwork.net/etc/usenet/e4000/drivers.rar Windows 2000 Install CD (367 MB): http://www.ocsnetwork.net/etc/usenet/e4000/w2ksp2.iso Let me know if this works. Also let me know when you have finished downloading what you need because I don't have much space on my server. I will leave them up as long as I can in case anyone else needs them, though. I would recommend staying with Windows 2000 or Windows XP. This computer is plenty powerful enough to handle either of these OS'es. You will have to extract the drivers CD ISO with WinRar. I was able to compress it so it would download faster. Let me know if you have any questions. Have fun, Nelson Nelson Thanks for posting these. Because I am on dialup, I had a friend download them and mail them to me. I am finally getting around to them. The ISO files all appear to be fine, but that RAR file will not open. It may be the software I am using, since I rarely deal with RAR files. I tried the older version of Winzip I have installed in both Win98 and Win2K. I also tried a thing called ZIP TOOLS, which is also older, but is supposed to open any compressed file. Could you please check that file and tell me what software was used to compress it. Of course this is the drivers file, which is the one I likely need the most for that computer. If all else fails, maybe you can post the actual ISO file instead, but lets see if I just need other software to open it first. Thanks Jimw |
#9
|
|||
|
|||
Need drivers for Gateway e-4000
Jimw wrote:
I just bought a used Gateway e-4000 from a reseller. It came complete except for the harddrive, and the external stuff (keyboard, monitor, mouse). This particular computer came from the factory with Windows 2000 and has the registration numbers on a label. I have always used Windows98 on my old computers. I am planning to begin using Linux in the future, so I am not going to waste the money on buying XP, which will likely be abandoned soon anyhow. But I do have a legal copy of both 98 and 2000, so I'll install one or the other. I just installed a hard drive, formatted it and booted it to Dos. Now I'm ready to install Windows. The problem is that I can not find the drivers anywhere. I went to gateway.com, was referred to mpccorp.com. They have every model listed but skip the e-4000. The closest is e-4100. I tried their "enter serial number", and it was not found. I sent them an email and got no reply. I called them, and after a big runaround I was told that this computer is out of warranty and I'll have to subscribe and pay by the minute. All I want are the frikkin drivers, and was hoping to also download a PDF manual too. Does anyone know where to get them? (What is the key for getting into the Bios too). Here are the specs. Gateway e series Model: flexatxskh esx e4000 Serial: 0029773609 -or- GTW0029773609 Dated: 2/25/03 Thanks for all help Jim Jim, First of all, the E-4000 computer probably has an XP Pro service tag on it. Do not even think about installing Windows 98 on it. The software is too old for a decent Pentium 4-class computer. Second, according to an old review I found, the system uses and Intel 845 chipset and probably has Intel 845 graphics, too. The board is most likely an Intel-made 845-series flashed with a Gateway BIOS. These boards typically used Intel's own gigabit Ethernet chip. You can find drivers on the Intel web site, using those for most any 845 chipset board in the microATX form factor. Third, well before Acer bought Gateway, Gateway sold off its "professional" computer line including all maintenance, spares, warranty service etc to MPC, who, I believe, are in Chapter 11. So much for getting useful vendor help! But this is a decently made computer. I have serviced similar Gateway models. Fourth, the F2 key should get you into the BIOS... Ben Myers |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gateway ML3706 XP Installation & Drivers | Zoned | General | 7 | November 3rd 07 04:20 AM |
Gateway MX6215b Drivers | ldoodle | Gateway Computers | 1 | April 2nd 07 06:07 AM |
Gateway MX6215b Drivers | Davy | Gateway Computers | 0 | April 2nd 07 01:38 AM |
Can't find drivers for USB 1.1 Gateway | Lee Bray | Gateway Computers | 1 | April 11th 04 01:14 AM |
Gateway Essential 466c - drivers - urgent!! | tropo | Gateway Computers | 6 | January 22nd 04 02:13 AM |