If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
A7V333 Burn out....
I had three A7V333-R boards burn at the power supply for the front USB
connector. Each board lasted 3 months (almost to the day) of 24/7 operation. I now suspect the "fixed" USB connector that came with the case. The positions of the wires in the connector did not match the board pin-outs. Why it took 3 months to burn I don't know. I left the connector off on the 3rd replacement and it has now gone 4 mo! Marc Chris wrote: I've had an ASUS A7V333, for just over a year with an XP1700 in it. All was good till friday... When with a smell of smoke it died.... :-( Now when I turn it on, the disks power up, but I get no screen activity. I don't know if it's the processor thats gone, or the board or both... No matter what I do I get no screen. Is there a way of contacting ASUS in the UK? The shop I bought it from Eclipse computers, I have found from previous experience has no techical support... Cheers Chris. |
#2
|
|||
|
|||
Definitley not the PSU. As green light still comes on etc.
Not Graphics card, cuz I've tried that in another machine... When I plug it into speakers, it says "System memory failure" or something of the kind. Removing the memory changes nothing. ASUS support in the UK is non existant practically. :-( Chris. Marc Freedman wrote in message ... I had three A7V333-R boards burn at the power supply for the front USB connector. Each board lasted 3 months (almost to the day) of 24/7 operation. I now suspect the "fixed" USB connector that came with the case. The positions of the wires in the connector did not match the board pin-outs. Why it took 3 months to burn I don't know. I left the connector off on the 3rd replacement and it has now gone 4 mo! Marc Chris wrote: I've had an ASUS A7V333, for just over a year with an XP1700 in it. All was good till friday... When with a smell of smoke it died.... :-( Now when I turn it on, the disks power up, but I get no screen activity. I don't know if it's the processor thats gone, or the board or both... No matter what I do I get no screen. Is there a way of contacting ASUS in the UK? The shop I bought it from Eclipse computers, I have found from previous experience has no techical support... Cheers Chris. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Upgrading firmware for my HL-DT-ST DVDRAM GSA-4040B Hitachi-LG optical making it burn 4x dvds at 4x. Is it safe? | MCheu | General | 0 | September 17th 04 09:35 PM |
Nero 6 won't burn disk-at-once/96 | k_yhz | Cdr | 0 | February 19th 04 04:22 AM |
How can I get advertised burn speed? | Charles Howse | Cdr | 11 | November 22nd 03 04:48 PM |
Asus A7V333 rev. 1.02 + AMD XP1800+ | Jean | General | 0 | September 6th 03 08:57 PM |
Nero & Alcohol won't burn my cd images anymore... | Joe Emenaker | Cdr | 0 | June 25th 03 11:57 PM |