Memory compatibility 939 A64 3000+

I am passing down my mobile 2500+ / NF7 combo to my son, and I'm going to
order a socket 939 A64 system. I was thinking about the 939 3000+ and Epox
EP-9NDA3+ (or "J" version w/out Firewire). Is it likely that I'll be okay
re-using my current RAM, which is 2 sticks of 512mb Kingmax PC3500? I've
got about 2gb of the stuff here, because it's performed very well in my
2500+ systems. I do plan on oc'ing the 3000+ some.
Please advise.

jake

On Fri, 11 Mar 2005 16:22:46 +0000, Jake wrote:

I am passing down my mobile 2500+ / NF7 combo to my son, and I'm going to
order a socket 939 A64 system. I was thinking about the 939 3000+ and Epox
EP-9NDA3+ (or "J" version w/out Firewire). Is it likely that I'll be okay
re-using my current RAM, which is 2 sticks of 512mb Kingmax PC3500? I've
got about 2gb of the stuff here, because it's performed very well in my
2500+ systems. I do plan on oc'ing the 3000+ some.
Please advise.

Setting the base ram speed to 133Mhz would allow you to raise the FSB up
to at least 266MHz for 9x266. If that's enough, you're fine.

--
Abit KT7-Raid (KT133) Tbred B core CPU @2400MHz (24x100FSB)
My server http://wesnewell.no-ip.com/cpu.php
Verizon server http://mysite.verizon.net/res0exft/cpu.htm

Quoth The Raven in

I am passing down my mobile 2500+ / NF7 combo to my son, and I'm
going to order a socket 939 A64 system. I was thinking about the 939
3000+ and Epox EP-9NDA3+ (or "J" version w/out Firewire). Is it
likely that I'll be okay re-using my current RAM, which is 2 sticks
of 512mb Kingmax PC3500? I've got about 2gb of the stuff here,
because it's performed very well in my 2500+ systems. I do plan on
oc'ing the 3000+ some.
Please advise.

jake

I got the a8v deluxe r2 board with the 3000+ Winchester. I OC'ed it to a
3800+ thanks to this group. it has some tricks to get it right, but a 600MHz
overclock is awesome.

--
Reality is an illusion caused by lack of alcohol.

Take out the _CURSEING to reply to me