A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » Homebuilt PC's
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

DVD Burner / Nero OEM suite Issue



 
 
Thread Tools Display Modes
  #1  
Old July 17th 05, 04:15 AM
Craig Palme
external usenet poster
 
Posts: n/a
Default DVD Burner / Nero OEM suite Issue

I've got a Lite-On DVD burner installed in my system. It's the 1633S model,
I think. I'm using Nero OEM suite to burn DVD's. The drive supports dvd+r dl
disks. When I go to create a dvd video, Nero Express only will recognize it
as a standard disk, 4.37 GB instead of the 8.35 GB or what ever it's
supposed to be. Any ideas?

Thanks

Craig


  #2  
Old July 17th 05, 04:20 AM
Render Me
external usenet poster
 
Posts: n/a
Default

You need the full version.

"Craig Palme" wrote in message
m...
I've got a Lite-On DVD burner installed in my system. It's the 1633S

model,
I think. I'm using Nero OEM suite to burn DVD's. The drive supports dvd+r

dl
disks. When I go to create a dvd video, Nero Express only will recognize

it
as a standard disk, 4.37 GB instead of the 8.35 GB or what ever it's
supposed to be. Any ideas?

Thanks

Craig




  #3  
Old July 17th 05, 07:34 AM
thesatguy
external usenet poster
 
Posts: n/a
Default

Right off hand I would say you need the 'retail' version.

"Craig Palme" wrote in message
m...
I've got a Lite-On DVD burner installed in my system. It's the 1633S
model, I think. I'm using Nero OEM suite to burn DVD's. The drive supports
dvd+r dl disks. When I go to create a dvd video, Nero Express only will
recognize it as a standard disk, 4.37 GB instead of the 8.35 GB or what
ever it's supposed to be. Any ideas?

Thanks

Craig



  #4  
Old July 17th 05, 04:56 PM
Conor
external usenet poster
 
Posts: n/a
Default

In article , Craig
Palme says...
I've got a Lite-On DVD burner installed in my system. It's the 1633S model,
I think. I'm using Nero OEM suite to burn DVD's. The drive supports dvd+r dl
disks. When I go to create a dvd video, Nero Express only will recognize it
as a standard disk, 4.37 GB instead of the 8.35 GB or what ever it's
supposed to be. Any ideas?

What version of Nero is it - as in 6.x.x.x?
Try updating it.


--
Conor

-You wanted an argument? Oh I'm sorry, but this is abuse. You want room
K5, just along the corridor. Stupid git. (Monty Python)
  #5  
Old July 17th 05, 05:08 PM
Ruel Smith
external usenet poster
 
Posts: n/a
Default


"Conor" wrote in message
t...
In article , Craig
Palme says...
I've got a Lite-On DVD burner installed in my system. It's the 1633S
model,
I think. I'm using Nero OEM suite to burn DVD's. The drive supports dvd+r
dl
disks. When I go to create a dvd video, Nero Express only will recognize
it
as a standard disk, 4.37 GB instead of the 8.35 GB or what ever it's
supposed to be. Any ideas?

What version of Nero is it - as in 6.x.x.x?
Try updating it.


Any version shipped with the drive should support all the features of the
drive. It usually does, anyway...


  #6  
Old July 17th 05, 05:12 PM
Render Me
external usenet poster
 
Posts: n/a
Default

Not the dumbed down express version..

"Ruel Smith" wrote in message
...

"Conor" wrote in message
t...
In article , Craig
Palme says...
I've got a Lite-On DVD burner installed in my system. It's the 1633S
model,
I think. I'm using Nero OEM suite to burn DVD's. The drive supports

dvd+r
dl
disks. When I go to create a dvd video, Nero Express only will

recognize
it
as a standard disk, 4.37 GB instead of the 8.35 GB or what ever it's
supposed to be. Any ideas?

What version of Nero is it - as in 6.x.x.x?
Try updating it.


Any version shipped with the drive should support all the features of the
drive. It usually does, anyway...




  #7  
Old July 17th 05, 08:08 PM
Ralph Wade Phillips
external usenet poster
 
Posts: n/a
Default

Howdy!

"Craig Palme" wrote in message
m...
I've got a Lite-On DVD burner installed in my system. It's the 1633S

model,
I think. I'm using Nero OEM suite to burn DVD's. The drive supports dvd+r

dl
disks. When I go to create a dvd video, Nero Express only will recognize

it
as a standard disk, 4.37 GB instead of the 8.35 GB or what ever it's
supposed to be. Any ideas?


Two. One - the drive IS a dual layer drive, right?

Second - Update to the latest version of Nero in that ballpark
(i.e., if you're running 6.0.x.y to 6.3.x.y, update to the latest 6.3.x.y
from their web site).

RwP


  #8  
Old July 17th 05, 08:09 PM
Ralph Wade Phillips
external usenet poster
 
Posts: n/a
Default

Howdy!

"Render Me" wrote in message
...
Not the dumbed down express version..


Funny - NeroExpress 6.3.1.25 does dual layer on three of my machines
.... albeit I've only tried one in each B)

RwP


  #9  
Old July 17th 05, 11:24 PM
Conor
external usenet poster
 
Posts: n/a
Default

In article , Ruel Smith says...

Any version shipped with the drive should support all the features of the
drive. It usually does, anyway...

No it doesn't hance the updates which not only update recognised drives
but also media. Also one of the 6.x.x.x updates added dual layer
support AFAIR.



--
Conor

-You wanted an argument? Oh I'm sorry, but this is abuse. You want room
K5, just along the corridor. Stupid git. (Monty Python)
  #10  
Old July 18th 05, 02:45 AM
Ruel Smith
external usenet poster
 
Posts: n/a
Default

"Conor" wrote in message
t...
In article , Ruel Smith says...

Any version shipped with the drive should support all the features of the
drive. It usually does, anyway...

No it doesn't hance the updates which not only update recognised drives
but also media. Also one of the 6.x.x.x updates added dual layer
support AFAIR.


Although I've never installed Nero Express from OEM CD's, since I have a
perfectly good working copy of Nero 6.X (complete), I have installed bundled
Roxio software and I've never had a drive that offered a feature that the
bundled software didn't support. If the drive usually does 8X or 16X when it
came out, the bundled Media Creator always supported it. Same way with Dual
Layer. Maybe LiteOn is cheap about it? I have a LiteOn 1673 dual layer DVD,
but it's on a Linux system, so I never tried the bundled software.


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
nero 6.6 oem suite bill Cdr 9 March 3rd 05 05:46 PM
Verify errors burning with liteon 52x burner and nero 5.5 & nero 6 None Required Cdr 10 August 13th 03 04:13 AM
Verify errors burning with liteon 52x burner and nero 5.5 & nero6 Mike Richter Cdr 1 August 7th 03 03:29 PM
Nero 5.5.10.42 weirdness John Smith Cdr 0 July 25th 03 10:17 PM
Digital Research 48x16x48 not recognized by Nero 5.5 Blackie Lawless Cdr 0 July 16th 03 01:58 PM


All times are GMT +1. The time now is 02:56 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.