A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » Homebuilt PC's
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Fitting New Graphics Card



 
 
Thread Tools Display Modes
  #1  
Old January 24th 07, 09:25 PM posted to alt.comp.hardware.pc-homebuilt
SM
external usenet poster
 
Posts: 6
Default Fitting New Graphics Card

I am Swapping my ATI Graphics card from a 9800 Pro to a 9550 card, it's
going into another machine

Can I simply swap them over with little probelems or will I have to
un-install it and all that crap, looking to save time

Any help would be greatly appreciated

SM


  #2  
Old January 24th 07, 09:35 PM posted to alt.comp.hardware.pc-homebuilt
1932
external usenet poster
 
Posts: 33
Default Fitting New Graphics Card


"SM" wrote in message
. ..
I am Swapping my ATI Graphics card from a 9800 Pro to a 9550 card, it's
going into another machine

Can I simply swap them over with little probelems or will I have to
un-install it and all that crap, looking to save time

Any help would be greatly appreciated

Uninstall drivers.
Switch off.
Change card.
Start machine.
Install drivers when asked for them.


  #3  
Old January 24th 07, 10:44 PM posted to alt.comp.hardware.pc-homebuilt
SM
external usenet poster
 
Posts: 6
Default Fitting New Graphics Card


"1932" wrote in message
...

"SM" wrote in message
. ..
I am Swapping my ATI Graphics card from a 9800 Pro to a 9550 card, it's
going into another machine

Can I simply swap them over with little probelems or will I have to
un-install it and all that crap, looking to save time

Any help would be greatly appreciated

Uninstall drivers.
Switch off.
Change card.
Start machine.
Install drivers when asked for them.



Did think as much, worth it in the end...

Thanks

SM


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
The Coming Combo Of The CPU And GPU, Ray Tracing Versus Rasterization, And Why Billions Of Dollars Is At Stake AirRaid Nvidia Videocards 9 September 10th 06 03:19 AM
Best Card for Handling Video Playback & Driving Large Display Harkhof General 31 February 5th 06 12:14 AM
Remedy for bad graphics card bios flash --- use PCI graphics card WITH dead AGP card to reflash bios [email protected] General 1 January 22nd 06 05:59 PM
FS printers/parts trays, printheads -- oki fujitsu dl3700 dl3800 hp genicom epson ibm dec jetdirect laserjet lexmark qms okidata microline 320 ml320 393 tally printronix tektronix qms toshiba zebra otc ibm intermec 7755 boul st laurent montreal ca cisco Printers 2 May 22nd 05 02:05 AM
A7N8X Deluxe problem - graphics card not working properly? Peter Weir Asus Motherboards 25 November 13th 03 10:03 PM


All times are GMT +1. The time now is 03:01 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.