If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
READ / transfer files from my old PATA drive
Can anyone tell me if this can be done..My old pc died, but i know the drive
works so any help please my new pc is SATA Thanx from Don |
#2
|
|||
|
|||
READ / transfer files from my old PATA drive
On Mon, 13 Jan 2014 12:39:00 -0800 (PST), 66oldgit
wrote: Can anyone tell me if this can be done..My old pc died, but i know the drive works so any help please my new pc is SATA Thanx from Don Sure, does the new PC have a USB port? If so, all you need us a USB to PATA adapter. You can get that either by that name directly, or buy a cheap USB external drive housing (making sure it's an old one that accepts a PATA drive, not SATA). Once connected up it's just a matter of copying the files you want. |
#3
|
|||
|
|||
READ / transfer files from my old PATA drive
On 1/13/2014 3:39 PM, 66oldgit wrote:
Can anyone tell me if this can be done..My old pc died, but i know the drive works so any help please my new pc is SATA Thanx from Don Get a USB 3.5" disk enclosure, with internal IDE connector. Your computer needs a USB connector on the back. http://www.newegg.com/Product/Produc...82E16817145132 Get a USB to 3-in-1 adapter, which has two IDE connectors and a SATA connector, as well as a USB cable. These work with any of the common hard drive form factors. Your computer needs a USB connector on the back. http://www.newegg.com/Product/Produc...9SIA2BP0U33777 They also make SATA to IDE adapters. The trick with these, is some are bidirectional, some are unidirectional. There are SATA to IDE and IDE to SATA ones. It's possible to buy the wrong one. Some of these don't work with ATAPI (optical) drives properly. Maybe five years ago, you could buy a "good" one, now we're left with the dregs in terms of chips to make them. The "form factor" of these, hints at the usage (whether they work in one-drive or two-drive configurations and so on). Nice when they work. I missed my opportunity to buy a particular "good" one, as they didn't sell that model in my country. And I refused to pay an extortionate brokerage fee at the time, to import it. The brokerage charge would have cost as much as the adapter. http://www.newegg.com/Product/Produc...82E16812186078 With that last adapter type, there isn't always room to use it. Laying the disk on the table top, is how you solve that problem. As long as the cabling is long enough to reach the computer, while the side panel is off for the SATA connection. Paul |
#4
|
|||
|
|||
READ / transfer files from my old PATA drive
On Mon, 13 Jan 2014 12:39:00 -0800 (PST), 66oldgit
wrote: Can anyone tell me if this can be done..My old pc died, but i know the drive works so any help please my new pc is SATA Thanx from Don The easiest answer would be an external docking bay. Something like this: http://www.newegg.com/Product/Produc...9SIA3U71888523 (I'm *NOT* vouching for the specific item, it's simply the first one I found that would do the job.) |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Can't transfer files to a MyBook drive.... | geronimo | Homebuilt PC's | 5 | November 23rd 07 08:39 AM |
help fix old pc or transfer files to a new pc | grnwavlb160 | Dell Computers | 1 | March 28th 06 07:41 AM |
install xp on new hard drive/transfer of files to new hard drive? | [email protected] | General | 3 | December 18th 05 03:51 AM |
Slow hard drive to hard drive transfer for mpeg files | [email protected] | Storage (alternative) | 8 | July 10th 05 12:15 AM |
WinDVD 3/5 sez "Cann't find any cdrom/dvdrom device" - but File Manager can read all files on the drive! | A Poster | Ati Videocards | 1 | August 13th 03 11:27 AM |