A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » System Manufacturers & Vendors » Compaq Computers
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Dead Compaq SR2037X, sorta.



 
 
Thread Tools Display Modes
  #1  
Old June 24th 10, 09:57 PM posted to alt.sys.pc-clone.compaq
Seth_J
external usenet poster
 
Posts: 1
Default Dead Compaq SR2037X, sorta.


My sister recently shipped me a nonfunctioning Compaq SR2037X desktop
thinking maybe I could get it working again since I've been in computers
since the 1980's. She's already sent it to a tech guy who replaced
various components including the motherboard and CPU and yet it still
won't go. Here's what I've done so far.

I do get a bootup screen and can run around in BIOS just fine.

At first I thought it was just some loose cables since the power supply
cable to the SATA drive had come off. Hooked it back on. NTLDR is
missing. No biggie there, I was planning to install PCBSD on it
anyway.

I put the installation DVD in, and...it keeps hanging on various spots
in the kernel loading process. Just freezes solid. So okay, I'l try
the second option, installing Ubuntu 10.4 on it.

Only that DVD won't work either. I've tried both on other systems and
they work just fine, so I know it isn't the media causing this.

For the heck of it, I tried downgrading to Ubuntu 9.04. That installed
flawlessly from the CD. Very interesting. I upgraded it to 9.10. That
worked too. But when I tried to upgrade to 10.4 over the internet, it
hung up again. I feel like there's a clue in there somewhere, but
exactly what it's pointing to, I don't know.

Next up from the 9.04 CD I ran both a hard drive and a memory test.
Hard drive tested okay. Now the kicker is this desktop has two memory
modules. If I remove one, then test the other, that works fine. The
module and slot don't seem to matter. If I put them both in there, the
test starts showing errors after about the fourth time through. This
seems like another clue, as if a memory handler can't do its job right.

Now what could it be? I wonder about the power supply thinking maybe
something's getting too hot and failing in there or sending an erratic
or incorrect voltage. Unfortunately I have no VOM meter to test this
theory, and even if I did I don't know the specs, though I'm sure I
could find them somewhere.

So, what do you think? Anyone encounter a problem like this before?


  #2  
Old June 25th 10, 04:27 AM posted to alt.sys.pc-clone.compaq
Ben Myers[_2_]
external usenet poster
 
Posts: 1,607
Default Dead Compaq SR2037X, sorta.

On 6/24/2010 4:57 PM, Seth_J wrote:
My sister recently shipped me a nonfunctioning Compaq SR2037X desktop
thinking maybe I could get it working again since I've been in computers
since the 1980's. She's already sent it to a tech guy who replaced
various components including the motherboard and CPU and yet it still
won't go. Here's what I've done so far.

I do get a bootup screen and can run around in BIOS just fine.

At first I thought it was just some loose cables since the power supply
cable to the SATA drive had come off. Hooked it back on. NTLDR is
missing. No biggie there, I was planning to install PCBSD on it
anyway.

I put the installation DVD in, and...it keeps hanging on various spots
in the kernel loading process. Just freezes solid. So okay, I'l try
the second option, installing Ubuntu 10.4 on it.

Only that DVD won't work either. I've tried both on other systems and
they work just fine, so I know it isn't the media causing this.

For the heck of it, I tried downgrading to Ubuntu 9.04. That installed
flawlessly from the CD. Very interesting. I upgraded it to 9.10. That
worked too. But when I tried to upgrade to 10.4 over the internet, it
hung up again. I feel like there's a clue in there somewhere, but
exactly what it's pointing to, I don't know.

Next up from the 9.04 CD I ran both a hard drive and a memory test.
Hard drive tested okay. Now the kicker is this desktop has two memory
modules. If I remove one, then test the other, that works fine. The
module and slot don't seem to matter. If I put them both in there, the
test starts showing errors after about the fourth time through. This
seems like another clue, as if a memory handler can't do its job right.

Now what could it be? I wonder about the power supply thinking maybe
something's getting too hot and failing in there or sending an erratic
or incorrect voltage. Unfortunately I have no VOM meter to test this
theory, and even if I did I don't know the specs, though I'm sure I
could find them somewhere.

So, what do you think? Anyone encounter a problem like this before?



Could be a flaky power supply. Could be a flaky DVD read mechanism,
whereas the CD reading mechanism is OK. Could be both.

The SR2037X tower pictured at the HPaq web site looks very vanilla to
me, and I suspect that it takes a similarly vanilla ATX power supply
with either 20- or 24-pin primary power connector to the motherboard.

.... Ben Myers
  #3  
Old June 27th 10, 04:09 AM posted to alt.sys.pc-clone.compaq
- Bobb -
external usenet poster
 
Posts: 179
Default Dead Compaq SR2037X, sorta.


"Seth_J" wrote in message
...

My sister recently shipped me a nonfunctioning Compaq SR2037X desktop
thinking maybe I could get it working again since I've been in computers
since the 1980's. She's already sent it to a tech guy who replaced
various components including the motherboard and CPU and yet it still
won't go. Here's what I've done so far.

I do get a bootup screen and can run around in BIOS just fine.

At first I thought it was just some loose cables since the power supply
cable to the SATA drive had come off. Hooked it back on. NTLDR is
missing. No biggie there, I was planning to install PCBSD on it
anyway.

I put the installation DVD in, and...it keeps hanging on various spots
in the kernel loading process. Just freezes solid. So okay, I'l try
the second option, installing Ubuntu 10.4 on it.

Only that DVD won't work either. I've tried both on other systems and
they work just fine, so I know it isn't the media causing this.

For the heck of it, I tried downgrading to Ubuntu 9.04. That installed
flawlessly from the CD. Very interesting. I upgraded it to 9.10. That
worked too. But when I tried to upgrade to 10.4 over the internet, it
hung up again. I feel like there's a clue in there somewhere, but
exactly what it's pointing to, I don't know.

Next up from the 9.04 CD I ran both a hard drive and a memory test.
Hard drive tested okay. Now the kicker is this desktop has two memory
modules. If I remove one, then test the other, that works fine. The
module and slot don't seem to matter. If I put them both in there, the
test starts showing errors after about the fourth time through. This
seems like another clue, as if a memory handler can't do its job right.

Now what could it be? I wonder about the power supply thinking maybe
something's getting too hot and failing in there or sending an erratic
or incorrect voltage. Unfortunately I have no VOM meter to test this
theory, and even if I did I don't know the specs, though I'm sure I
could find them somewhere.

So, what do you think? Anyone encounter a problem like this before?

Back to square one ... did your sister DO anything to the PC before the
problem ?

I'd suspect memory too, since with a new mb and new CPU - what's left ?
Just power and memory.
Is video memory onboard motherboard or separate video card ?
monitor settings ? If you leave in basic VGA, 800x600 , nothing fancy, does
that work OK ?

Either mem stick works OK alone, but are they identical memory sticks ? the
same SPEED ?
In BIOS go to advanced / memory section and toggle memory options.
On the motherboard , if in pairs are they accessed differently than if only
one stick ?

Switches to be set ?
I didn't have your exact model number, but guessing at it from :
http://partsurfer.hp.com/WSearch.asp...chText=SR2037X
got me:
MEMORY INFO:
P8670-69004
512MB, PC2-4300, DDR2-533, SDRAM DIMM memory


  #4  
Old July 1st 10, 11:39 PM posted to alt.sys.pc-clone.compaq
Seth_J[_2_]
external usenet poster
 
Posts: 1
Default Dead Compaq SR2037X, sorta.


If she did anything to it beforehand, she didn't tell me.

The memory modules were different brands, but were the same speed and
type far as I could tell by looking at them.

Looked like the video shared general RAM, but PCBSD locked up before
loading in any type of graphical environment, so its usage should have
been minimal at that time. Oh, and I should have mentioned it locked
when only one memory stick was in as well.

I suppose I could try replacing the memory with a single 1 or 2 gig
module and the power supply just to see what that gets me, and since all
of it isn't too expensive. That won't happen for a couple months at
least though since I'm out on the road and away from the house for that
long.


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dead Bestec power supply in Compaq Presario SR2037X Postman Delivers Compaq Computers 1 April 29th 10 09:04 PM
COMPAQ LTE Lite 4/33C - Display is dead? Lactose Compaq Computers 4 October 24th 09 08:54 AM
OT sorta Eva[_2_] Dell Computers 36 May 31st 08 04:59 AM
Dead Compaq Presario 1200xl Al Compaq Computers 1 September 13th 05 02:42 AM
Compaq motherboard dead! Nitin Compaq Computers 3 July 7th 03 12:45 AM


All times are GMT +1. The time now is 04:09 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.