A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » Scanners
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Minolta Dimage F-3000 (a.k.a. Scan Multi) Film Masks



 
 
Thread Tools Display Modes
  #1  
Old November 27th 15, 11:40 AM posted to alt.comp.periphs.scanner
Hauke Fath
external usenet poster
 
Posts: 2
Default Minolta Dimage F-3000 (a.k.a. Scan Multi) Film Masks

Hi,

a while back, I pulled a Minolta Scan Multi F 3000 from ?bay, with an
eye towards MF scanning. The scanner came with the MH-M1 film holder,
but not with the masks for it; and while you can just put in film
anyway, there is flare.

Does anyone out there have this scanner model (or the F 3200, which is
supposed to be mechanically identical), and could provide me with
measurements and / or a scan of the film masks? I could then make my own
from cardboard or plastic foil.

Thanks,
Hauke

--
Now without signature.
  #3  
Old November 28th 15, 03:17 PM posted to alt.comp.periphs.scanner
Hauke Fath
external usenet poster
 
Posts: 2
Default Minolta Dimage F-3000 (a.k.a. Scan Multi) Film Masks

Stephen wrote:

Does anyone out there have this scanner model (or the F 3200, which is
supposed to be mechanically identical), and could provide me with
measurements and / or a scan of the film masks? I could then make my own
from cardboard or plastic foil.


Here's a scan of the masks I have:
https://www.dropbox.com/s/8ty88fhf6d...Masks.pdf?dl=0

The APS & 16mm have guide rails for the film.


Thanks, that's great!

Would it be possible for you to provide me with the measurements for the
6x6 mask - outside, inside, frame width, distance of the mask holes? I
think I could derive the other masks' sizes from that.

Thanks again,
hauke

--
Now without signature.
  #4  
Old November 28th 15, 09:13 PM posted to alt.comp.periphs.scanner
Stephen
external usenet poster
 
Posts: 98
Default Minolta Dimage F-3000 (a.k.a. Scan Multi) Film Masks

If you print the pdf as actual size, it should be the same as below.

For the 6x6 mask:
---------------------------------------------------
93.4mm x 71.3mm - outside
65.5mm x 65.5mm - inside
3.6 mm x 3.2mm - oblong hole (side with one short diagonal cut)
21.5mm - center of oblong hole to side with short diagonal cut
3.2mm - round hole (side with 2 diagonal cuts)
65.8mm - center to center of holes
2.7mm distance of the slot for the film guide rail.
4.1mm to center of hole that's under the film rail guide slot.
2.7mm - film rail guide slot height
67.1 - film rail guide slot length
The bottom notch between the holes clear is to clear the latch.





On Sat, 28 Nov 2015 15:17:05 +0100,
(Hauke Fath) had a flock of green cheek conures squawk out:

Stephen wrote:

Does anyone out there have this scanner model (or the F 3200, which is
supposed to be mechanically identical), and could provide me with
measurements and / or a scan of the film masks? I could then make my own
from cardboard or plastic foil.


Here's a scan of the masks I have:
https://www.dropbox.com/s/8ty88fhf6d...Masks.pdf?dl=0

The APS & 16mm have guide rails for the film.


Thanks, that's great!

Would it be possible for you to provide me with the measurements for the
6x6 mask - outside, inside, frame width, distance of the mask holes? I
think I could derive the other masks' sizes from that.

Thanks again,
hauke


--

Stephen

A truly happy person is one who can enjoy the scenery on a detour.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Minolta Dimage Scan Dual & Linux Fidel Scanners 0 January 15th 06 12:14 AM
Minolta Dimage Scan Dual unter windows XP? Peter Scanners 5 January 12th 05 09:00 PM
FA - MINOLTA DIMAGE SCAN DUAL SCSI FILM SCANNER-eBay [email protected] Scanners 0 May 7th 04 07:27 PM
FA eBay - Minolta Dimage Scan Dual SCSI Film Scanner Jack Winberg Scanners 0 May 2nd 04 12:19 AM
Minolta Dimage Xt / SD card reader probs Pieter General Hardware 0 December 27th 03 04:37 PM


All times are GMT +1. The time now is 04:30 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.