If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
A dying very old HDD confirmed?
Hello all.
I just got this e-mails and checked the logs this morning on my Linux/Debian machine: Date: Sat, 19 Apr 2014 07:25:40 -0700 From: root root@MyLinuxBox To: root@MyLinuxBox Subject: SMART error (CurrentPendingSector) detected on host: MyLinuxBox This email was generated by the smartd daemon running on: host name: MyLinuxBox DNS domain: [Unknown] NIS domain: (none) The following warning/error was logged by the smartd daemon: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors For details see host's SYSLOG. You can also use the smartctl utility for further investigation. Another email message will be sent in 24 hours if the problem persists. -- Date: Sat, 19 Apr 2014 07:25:40 -0700 From: root root@MyLinuxBox To: root@MyLinuxBox Subject: SMART error (OfflineUncorrectableSector) detected on host: MyLinuxBox This email was generated by the smartd daemon running on: host name: MyLinuxBox DNS domain: [Unknown] NIS domain: (none) The following warning/error was logged by the smartd daemon: Device: /dev/sda [SAT], 1 Offline uncorrectable sectors For details see host's SYSLOG. You can also use the smartctl utility for further investigation. Another email message will be sent in 24 hours if the problem persists. -- # smartctl -A /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 057 053 006 Pre-fail Always - 22017802 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 6 7 Seek_Error_Rate 0x000f 089 060 030 Pre-fail Always - 928772918 9 Power_On_Hours 0x0032 019 019 000 Old_age Always - 71035 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 362 194 Temperature_Celsius 0x0022 038 053 000 Old_age Always - 38 195 Hardware_ECC_Recovered 0x001a 057 053 000 Old_age Always - 22017802 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 -- # cat /var/log/syslog Apr 19 06:35:01 MyLinuxBox /USR/SBIN/CRON[10875]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 06:45:01 MyLinuxBox /USR/SBIN/CRON[11849]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 06:55:01 MyLinuxBox /USR/SBIN/CRON[12792]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 07:05:01 MyLinuxBox /USR/SBIN/CRON[13691]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 07:15:01 MyLinuxBox /USR/SBIN/CRON[14565]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 07:17:01 MyLinuxBox /USR/SBIN/CRON[14739]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Apr 19 07:25:01 MyLinuxBox /USR/SBIN/CRON[15426]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 07:25:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors Apr 19 07:25:40 MyLinuxBox smartd[3594]: Sending warning via /usr/share/smartmontools/smartd-runner to root ... Apr 19 07:25:40 MyLinuxBox smartd[3594]: Warning via /usr/share/smartmontools/smartd-runner to root: successful Apr 19 07:25:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Offline uncorrectable sectors Apr 19 07:25:40 MyLinuxBox smartd[3594]: Sending warning via /usr/share/smartmontools/smartd-runner to root ... Apr 19 07:25:40 MyLinuxBox smartd[3594]: Warning via /usr/share/smartmontools/smartd-runner to root: successful Apr 19 07:25:40 MyLinuxBox smartd[3594]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 34 to 33 Apr 19 07:35:01 MyLinuxBox /USR/SBIN/CRON[16291]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 07:45:01 MyLinuxBox /USR/SBIN/CRON[17090]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 07:55:01 MyLinuxBox /USR/SBIN/CRON[17862]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 07:55:41 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors Apr 19 07:55:41 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Offline uncorrectable sectors Apr 19 07:55:41 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 39 to 38 Apr 19 08:05:01 MyLinuxBox /USR/SBIN/CRON[18647]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 08:15:01 MyLinuxBox /USR/SBIN/CRON[19415]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 08:17:01 MyLinuxBox /USR/SBIN/CRON[19569]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Apr 19 08:25:01 MyLinuxBox /USR/SBIN/CRON[20175]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 08:25:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors Apr 19 08:25:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Offline uncorrectable sectors Apr 19 08:35:01 MyLinuxBox /USR/SBIN/CRON[20925]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 08:45:01 MyLinuxBox /USR/SBIN/CRON[21667]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 08:55:01 MyLinuxBox /USR/SBIN/CRON[22369]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 08:55:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors Apr 19 08:55:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Offline uncorrectable sectors Apr 19 09:05:01 MyLinuxBox /USR/SBIN/CRON[23037]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 09:15:01 MyLinuxBox /USR/SBIN/CRON[23703]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 09:17:01 MyLinuxBox /USR/SBIN/CRON[23834]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Apr 19 09:25:01 MyLinuxBox /USR/SBIN/CRON[24350]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 09:25:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors Apr 19 09:25:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Offline uncorrectable sectors Apr 19 09:25:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 38 to 39 Apr 19 09:35:01 MyLinuxBox /USR/SBIN/CRON[24983]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) -- # smartctl --test=long /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Extended self-test routine immediately in off-line mode". Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 58 minutes for test to complete. Test will complete after Sat Apr 19 10:40:00 2014 Use smartctl -X to abort test. [To be continued... I will post its long test results later.] FYI, this HDD is my Seagate Barracuda 7200.7 (ST380011A; 7200 RPM; 80 GB) HDD for storage/backup/secondary. I think that's the IDE one IIRC. My detailed specifications of the machine: Intel Core 2 Q8200 (quad-core; default clock speeds; Socket 775 LGA) with a Scythe Andy Master 120mm CPU cooler (SCASM-1000), Antec Sonata Proto mid tower ATX case with two case 120mm case fans, MSI P43 NEO3-F (MSI-7514) motherboard (latest BIOS), two 1 GB of Crucial RAM (Samsung DDR2 800 (PC2-6400; 400 MHz), EVGA NVIDIA GeForce 8800 GT PCIE video card (512 MB of VRAM), onboard RealTek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet and RealTek audio, 600 watts SeaSonic S12 PSU, ASUS TV Tuner Card 880 NTSC (cx23880), Pioneer CD/DVD Burner Black SATA Model DVR-218LBK LabelFlash Support, 3.5" disk drive, Corsair Force Series F115 Solid-State Disk (SSD) (115 GB; CSSD-F115GB2-BRKT-A), Seagate Barracuda 7200.7 (ST380011A; 7200 RPM; 80 GB) HDD for storage/backup/secondary, USB+memory card reader front panel, and an Intel InBusiness 10/100 (82559) NIC (not connected). Running 64-bit Debian (Linux; stable; kernel v3.2... x86_64). Thank you in advance. -- "Jesus lives!" /\___/\ Ant(Dude) @ http://antfarm.ma.cx (Personal Web Site) / /\ /\ \ Ant's Quality Foraged Links: http://aqfl.net | |o o| | \ _ / If crediting, then use Ant nickname and AQFL URL/link. ( ) If e-mailing, then axe ANT from its address if needed. Ant is currently not listening to any songs on this computer. |
#2
|
|||
|
|||
A dying very old HDD confirmed?
I ran smartctl's long test and waited about an hour.
I got this e-mail in the beginning of the test: Date: Sat, 19 Apr 2014 09:55:41 -0700 From: root root@MyLinuxBox To: root@MyLinuxBox Subject: SMART error (SelfTest) detected on host: MyLinuxBox This email was generated by the smartd daemon running on: host name: MyLinuxBox DNS domain: [Unknown] NIS domain: (none) The following warning/error was logged by the smartd daemon: Device: /dev/sda [SAT], Self-Test Log error count increased from 0 to 1 For details see host's SYSLOG. You can also use the smartctl utility for further investigation. Another email message will be sent in 24 hours if the problem persists. -- After an hour to finish its long test, I checked: From /var/log/syslog: .... Apr 19 09:45:01 MyLinuxBox /USR/SBIN/CRON[25663]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 09:55:01 MyLinuxBox /USR/SBIN/CRON[26267]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 09:55:41 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors Apr 19 09:55:41 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Offline uncorrectable sectors Apr 19 09:55:41 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 57 to 56 Apr 19 09:55:41 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 57 to 56 Apr 19 09:55:41 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], previous self-test completed with error (read test element) Apr 19 09:55:41 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], Self-Test Log error count increased from 0 to 1 Apr 19 09:55:41 MyLinuxBox smartd[3594]: Sending warning via /usr/share/smartmontools/smartd-runner to root ... Apr 19 09:55:41 MyLinuxBox smartd[3594]: Warning via /usr/share/smartmontools/smartd-runner to root: successful Apr 19 10:05:01 MyLinuxBox /USR/SBIN/CRON[26877]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 10:15:01 MyLinuxBox /USR/SBIN/CRON[27449]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 10:17:01 MyLinuxBox /USR/SBIN/CRON[27560]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Apr 19 10:25:01 MyLinuxBox /USR/SBIN/CRON[27986]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 10:25:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors Apr 19 10:25:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Offline uncorrectable sectors Apr 19 10:25:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 39 to 38 Apr 19 10:35:01 MyLinuxBox /USR/SBIN/CRON[28518]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 10:45:01 MyLinuxBox /USR/SBIN/CRON[28950]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) # smartctl -A /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 056 053 006 Pre-fail Always - 208576601 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 6 7 Seek_Error_Rate 0x000f 089 060 030 Pre-fail Always - 928963346 9 Power_On_Hours 0x0032 019 019 000 Old_age Always - 71036 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 362 194 Temperature_Celsius 0x0022 038 053 000 Old_age Always - 38 195 Hardware_ECC_Recovered 0x001a 056 053 000 Old_age Always - 208576601 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 Those results look bad? -- "Jesus lives!" /\___/\ Ant(Dude) @ http://antfarm.ma.cx (Personal Web Site) / /\ /\ \ Ant's Quality Foraged Links: http://aqfl.net | |o o| | \ _ / If crediting, then use Ant nickname and AQFL URL/link. ( ) If e-mailing, then axe ANT from its address if needed. Ant is currently not listening to any songs on this computer. |
#3
|
|||
|
|||
A dying very old HDD confirmed?
Oops, I used the wrong parameter to show smartctl results. I also ran
GSmartControl v0.8.6 for its GUI, so I could watch its ETAs and percentage in real-time. 2/Two more short tests passed twice so far. 2/Two more long tests failed. It looks like it only got to 40% of the long tests done? Here are the latest results: # smartctl -a /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus Device Model: ST380011A Serial Number: 4JV5P7LN Firmware Version: 8.01 User Capacity: 80,026,361,856 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Sat Apr 19 11:49:59 2014 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 118) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 58) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 056 053 006 Pre-fail Always - 150279675 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 6 7 Seek_Error_Rate 0x000f 089 060 030 Pre-fail Always - 929163443 9 Power_On_Hours 0x0032 019 019 000 Old_age Always - 71037 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 362 194 Temperature_Celsius 0x0022 037 053 000 Old_age Always - 37 195 Hardware_ECC_Recovered 0x001a 056 053 000 Old_age Always - 150279675 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 60% 5501 67691664 # 2 Short offline Completed without error 00% 5501 - # 3 Short offline Completed without error 00% 5501 - # 4 Extended offline Completed: read failure 60% 5501 67691664 # 5 Short offline Completed without error 00% 5501 - # 6 Extended offline Completed: read failure 60% 5499 67691664 # 7 Extended offline Completed without error 00% 3165 - # 8 Extended offline Completed without error 00% 48483 - # 9 Extended offline Completed without error 00% 43207 - #10 Extended offline Interrupted (host reset) 90% 43201 - #11 Extended offline Completed without error 00% 39844 - #12 Extended offline Interrupted (host reset) 20% 38502 - #13 Extended offline Completed without error 00% 35555 - #14 Extended offline Completed without error 00% 31886 - #15 Extended offline Completed without error 00% 22233 - #16 Extended offline Completed without error 00% 18951 - #17 Extended offline Completed without error 00% 18674 - #18 Extended offline Completed without error 00% 15957 - #19 Extended offline Completed without error 00% 14448 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. /var/log/syslog: Apr 19 10:55:01 MyLinuxBox /USR/SBIN/CRON[29390]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 10:55:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors Apr 19 10:55:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Offline uncorrectable sectors Apr 19 11:05:01 MyLinuxBox /USR/SBIN/CRON[29854]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 11:15:01 MyLinuxBox /USR/SBIN/CRON[30236]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 11:17:01 MyLinuxBox /USR/SBIN/CRON[30313]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Apr 19 11:25:01 MyLinuxBox /USR/SBIN/CRON[30635]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 11:25:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors Apr 19 11:25:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Offline uncorrectable sectors Apr 19 11:25:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 56 to 57 Apr 19 11:25:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 38 to 36 Apr 19 11:25:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 56 to 57 Apr 19 11:25:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], previous self-test completed without error Apr 19 11:25:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], Self-Test Log error count increased from 1 to 2 Apr 19 11:25:40 MyLinuxBox smartd[3594]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 33 to 31 Apr 19 11:35:01 MyLinuxBox /USR/SBIN/CRON[31022]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 11:45:01 MyLinuxBox /USR/SBIN/CRON[31430]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) -- "Jesus lives!" /\___/\ Ant(Dude) @ http://antfarm.ma.cx (Personal Web Site) / /\ /\ \ Ant's Quality Foraged Links: http://aqfl.net | |o o| | \ _ / If crediting, then use Ant nickname and AQFL URL/link. ( ) If e-mailing, then axe ANT from its address if needed. Ant is currently not listening to any songs on this computer. |
#4
|
|||
|
|||
A dying very old HDD confirmed?
"Ant" wrote in message m... Hello all. I just got this e-mails and checked the logs this morning on my Linux/Debian machine: Date: Sat, 19 Apr 2014 07:25:40 -0700 From: root root@MyLinuxBox To: root@MyLinuxBox Subject: SMART error (CurrentPendingSector) detected on host: MyLinuxBox This email was generated by the smartd daemon running on: host name: MyLinuxBox DNS domain: [Unknown] NIS domain: (none) The following warning/error was logged by the smartd daemon: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors For details see host's SYSLOG. You can also use the smartctl utility for further investigation. Another email message will be sent in 24 hours if the problem persists. -- Date: Sat, 19 Apr 2014 07:25:40 -0700 From: root root@MyLinuxBox To: root@MyLinuxBox Subject: SMART error (OfflineUncorrectableSector) detected on host: MyLinuxBox This email was generated by the smartd daemon running on: host name: MyLinuxBox DNS domain: [Unknown] NIS domain: (none) The following warning/error was logged by the smartd daemon: Device: /dev/sda [SAT], 1 Offline uncorrectable sectors For details see host's SYSLOG. You can also use the smartctl utility for further investigation. Another email message will be sent in 24 hours if the problem persists. -- # smartctl -A /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 057 053 006 Pre-fail - 22017802 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age - 0 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail - 6 7 Seek_Error_Rate 0x000f 089 060 030 Pre-fail - 928772918 9 Power_On_Hours 0x0032 019 019 000 Old_age - 71035 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age - 362 194 Temperature_Celsius 0x0022 038 053 000 Old_age Always - 38 195 Hardware_ECC_Recovered 0x001a 057 053 000 Old_age Always - 22017802 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age ne - 1 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age ne - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 Its certainly got some reallocated sectors and just one each of offline uncorrectable and pending sectors, but its overstating it to say that its dying unless those counts keep increasing. |
#5
|
|||
|
|||
A dying very old HDD confirmed?
"Ant" wrote in message m... I ran smartctl's long test and waited about an hour. I got this e-mail in the beginning of the test: Date: Sat, 19 Apr 2014 09:55:41 -0700 From: root root@MyLinuxBox To: root@MyLinuxBox Subject: SMART error (SelfTest) detected on host: MyLinuxBox This email was generated by the smartd daemon running on: host name: MyLinuxBox DNS domain: [Unknown] NIS domain: (none) The following warning/error was logged by the smartd daemon: Device: /dev/sda [SAT], Self-Test Log error count increased from 0 to 1 For details see host's SYSLOG. You can also use the smartctl utility for further investigation. Another email message will be sent in 24 hours if the problem persists. -- After an hour to finish its long test, I checked: From /var/log/syslog: ... Apr 19 09:45:01 MyLinuxBox /USR/SBIN/CRON[25663]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 09:55:01 MyLinuxBox /USR/SBIN/CRON[26267]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 09:55:41 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors Apr 19 09:55:41 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Offline uncorrectable sectors Apr 19 09:55:41 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 57 to 56 Apr 19 09:55:41 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 57 to 56 Apr 19 09:55:41 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], previous self-test completed with error (read test element) Apr 19 09:55:41 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], Self-Test Log error count increased from 0 to 1 Apr 19 09:55:41 MyLinuxBox smartd[3594]: Sending warning via /usr/share/smartmontools/smartd-runner to root ... Apr 19 09:55:41 MyLinuxBox smartd[3594]: Warning via /usr/share/smartmontools/smartd-runner to root: successful Apr 19 10:05:01 MyLinuxBox /USR/SBIN/CRON[26877]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 10:15:01 MyLinuxBox /USR/SBIN/CRON[27449]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 10:17:01 MyLinuxBox /USR/SBIN/CRON[27560]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Apr 19 10:25:01 MyLinuxBox /USR/SBIN/CRON[27986]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 10:25:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors Apr 19 10:25:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], 1 Offline uncorrectable sectors Apr 19 10:25:40 MyLinuxBox smartd[3594]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 39 to 38 Apr 19 10:35:01 MyLinuxBox /USR/SBIN/CRON[28518]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) Apr 19 10:45:01 MyLinuxBox /USR/SBIN/CRON[28950]: (root) CMD (command -v debian-sa1 /dev/null && debian-sa1 1 1) # smartctl -A /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 056 053 006 Pre-fail - 208576601 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age - 0 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail - 6 7 Seek_Error_Rate 0x000f 089 060 030 Pre-fail - 928963346 9 Power_On_Hours 0x0032 019 019 000 Old_age - 71036 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age - 362 194 Temperature_Celsius 0x0022 038 053 000 Old_age Always - 38 195 Hardware_ECC_Recovered 0x001a 056 053 000 Old_age Always - 208576601 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age ne - 1 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age ne - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 Those results look bad? Not too bad if they don't keep increasing. |
#6
|
|||
|
|||
A dying very old HDD confirmed?
On 4/19/2014 1:56 PM PT, Rod Speed typed:
.... Those results look bad? Not too bad if they don't keep increasing. Really? Hmm. I will keep my compound eyes on it then. I wonder if Linux/Debian will keep notifying about them daily like this morning. Today was the (fir/1)st day. FYI on the latest results: # smartctl -a /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus Device Model: ST380011A Serial Number: 4JV5P7LN Firmware Version: 8.01 User Capacity: 80,026,361,856 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Sat Apr 19 17:30:30 2014 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 118) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 58) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 056 053 006 Pre-fail Always - 117120139 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 6 7 Seek_Error_Rate 0x000f 089 060 030 Pre-fail Always - 929899528 9 Power_On_Hours 0x0032 019 019 000 Old_age Always - 71043 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 362 194 Temperature_Celsius 0x0022 037 053 000 Old_age Always - 37 195 Hardware_ECC_Recovered 0x001a 056 053 000 Old_age Always - 117120139 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 60% 5502 67691664 # 2 Extended offline Completed: read failure 60% 5501 67691664 # 3 Short offline Completed without error 00% 5501 - # 4 Short offline Completed without error 00% 5501 - # 5 Extended offline Completed: read failure 60% 5501 67691664 # 6 Short offline Completed without error 00% 5501 - # 7 Extended offline Completed: read failure 60% 5499 67691664 # 8 Extended offline Completed without error 00% 3165 - # 9 Extended offline Completed without error 00% 48483 - #10 Extended offline Completed without error 00% 43207 - #11 Extended offline Interrupted (host reset) 90% 43201 - #12 Extended offline Completed without error 00% 39844 - #13 Extended offline Interrupted (host reset) 20% 38502 - #14 Extended offline Completed without error 00% 35555 - #15 Extended offline Completed without error 00% 31886 - #16 Extended offline Completed without error 00% 22233 - #17 Extended offline Completed without error 00% 18951 - #18 Extended offline Completed without error 00% 18674 - #19 Extended offline Completed without error 00% 15957 - #20 Extended offline Completed without error 00% 14448 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. How come it can't complete the long tests though? It only gets about 40% done and then fails. Isn't that a bad sign? -- "Jesus lives!" /\___/\ Ant(Dude) @ http://antfarm.ma.cx (Personal Web Site) / /\ /\ \ Ant's Quality Foraged Links: http://aqfl.net | |o o| | \ _ / If crediting, then use Ant nickname and AQFL URL/link. ( ) If e-mailing, then axe ANT from its address if needed. Ant is currently not listening to any songs on this computer. |
#7
|
|||
|
|||
A dying very old HDD confirmed?
Ant wrote
Rod Speed wrote Ant wrote Those results look bad? Not too bad if they don't keep increasing. Really? Yeah, a few reallocated sectors are no big deal on a drive that old. Some of those older drives don't handle mains failure that well and can produce a bad sector that way and then just reallocate that bad sector. Hmm. I will keep my compound eyes on it then. I wonder if Linux/Debian will keep notifying about them daily like this morning. Dunno, I don't use that much so can't say about that. Today was the (fir/1)st day. FYI on the latest results: # smartctl -a /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus Device Model: ST380011A Serial Number: 4JV5P7LN Firmware Version: 8.01 User Capacity: 80,026,361,856 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Sat Apr 19 17:30:30 2014 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 118) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 58) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 056 053 006 Pre-fail - 117120139 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age - 0 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail - 6 7 Seek_Error_Rate 0x000f 089 060 030 Pre-fail - 929899528 9 Power_On_Hours 0x0032 019 019 000 Old_age - 71043 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age - 362 194 Temperature_Celsius 0x0022 037 053 000 Old_age Always - 37 195 Hardware_ECC_Recovered 0x001a 056 053 000 Old_age Always - 117120139 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age ne - 1 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age ne - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 That's the same as what you posted yesterday on the most important bad sector data. SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 60% 5502 67691664 # 2 Extended offline Completed: read failure 60% 5501 67691664 # 3 Short offline Completed without error 00% 5501 - # 4 Short offline Completed without error 00% 5501 - # 5 Extended offline Completed: read failure 60% 5501 67691664 # 6 Short offline Completed without error 00% 5501 - # 7 Extended offline Completed: read failure 60% 5499 67691664 # 8 Extended offline Completed without error 00% 3165 - # 9 Extended offline Completed without error 00% 48483 - #10 Extended offline Completed without error 00% 43207 - #11 Extended offline Interrupted (host reset) 90% 43201 - #12 Extended offline Completed without error 00% 39844 - #13 Extended offline Interrupted (host reset) 20% 38502 - #14 Extended offline Completed without error 00% 35555 - #15 Extended offline Completed without error 00% 31886 - #16 Extended offline Completed without error 00% 22233 - #17 Extended offline Completed without error 00% 18951 - #18 Extended offline Completed without error 00% 18674 - #19 Extended offline Completed without error 00% 15957 - #20 Extended offline Completed without error 00% 14448 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. How come it can't complete the long tests though? Dunno. It only gets about 40% done and then fails. Isn't that a bad sign? I don't test drives like that, just watch the bad sector numbers to see if they change. |
#8
|
|||
|
|||
A dying very old HDD confirmed?
On 4/19/2014 8:02 PM PT, Rod Speed typed:
Yeah, a few reallocated sectors are no big deal on a drive that old. Some of those older drives don't handle mains failure that well and can produce a bad sector that way and then just reallocate that bad sector. Interesting. I did not know that. Hmm. I will keep my compound eyes on it then. I wonder if Linux/Debian will keep notifying about them daily like this morning. Dunno, I don't use that much so can't say about that. We'll see... That's the same as what you posted yesterday on the most important bad sector data. OK. So, I am just looking at "6" value to rise to be concerned. How come it can't complete the long tests though? Dunno. That is what concerns me. If it can't finish it, then something is going bad? It only gets about 40% done and then fails. Isn't that a bad sign? I don't test drives like that, just watch the bad sector numbers to see if they change. Ah. -- "Jesus lives!" /\___/\ Ant(Dude) @ http://antfarm.ma.cx (Personal Web Site) / /\ /\ \ Ant's Quality Foraged Links: http://aqfl.net | |o o| | \ _ / If crediting, then use Ant nickname and AQFL URL/link. ( ) If e-mailing, then axe ANT from its address if needed. |
#9
|
|||
|
|||
A dying very old HDD confirmed?
Hello,
Rod Speed a écrit : Yeah, a few reallocated sectors are no big deal on a drive that old. However having Current_Pending_Sector or Offline_Uncorrectable = 1 is a bit more annoying. It means that the data inside a sector is currently unreadable and the embedded disk controller was unable to reallocate the failing sector. In short, it means : data has been lost. Not too good for a backup drive. |
#10
|
|||
|
|||
A dying very old HDD confirmed?
Pascal Hambourg writes:
Rod Speed a écrit : Yeah, a few reallocated sectors are no big deal on a drive that old. However having Current_Pending_Sector or Offline_Uncorrectable = 1 is a bit more annoying. It means that the data inside a sector is currently unreadable and the embedded disk controller was unable to reallocate the failing sector. In short, it means : data has been lost. Not too good for a backup drive. AIUI Current_Pending_Sector means the controller hasn’t had the opportunity to reallocate yet, not that it’s tried and failed. But yes, any reads from affected sectors can be expected to fail. Oh, another thing: Not too bad if they don't keep increasing. Normalized SMART values decrease towards failure. -- http://www.greenend.org.uk/rjk/ |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
confirmed: AMD will buy ATI for $5.4 billion | AirRaid Mach 2.5 | Ati Videocards | 2 | July 27th 06 11:59 PM |
confirmed: AMD will buy ATI for $5.4 billion | AirRaid Mach 2.5 | AMD x86-64 Processors | 1 | July 24th 06 11:14 AM |
confirmed: AMD will buy ATI for $5.4 billion | AirRaid Mach 2.5 | Overclocking AMD Processors | 1 | July 24th 06 11:14 AM |
confirmed: AMD will buy ATI for $5.4 billion | AirRaid Mach 2.5 | Nvidia Videocards | 1 | July 24th 06 11:14 AM |
Yamhill confirmed? | Derek Baker | General | 15 | January 6th 04 09:14 PM |