XP2400+ @200 fsb

Are you guys having much luck running your 2400+ cpu's @200 fsb? I only
have crucial 2100 ddr, so I tried to run fsb at 200 with memory at 133. I am
only running asynchronously to see if it is worth buying some ddr3200. It
boots and runs ok, but crashes during 3Dmark03. I am using a thermaltake
silent boost hsf and have tried 1.75 volts so far. Maybe more voltage will
help?
tia

"knowname" wrote in message
om...
Are you guys having much luck running your 2400+ cpu's @200 fsb? I only
have crucial 2100 ddr, so I tried to run fsb at 200 with memory at 133. I
am
only running asynchronously to see if it is worth buying some ddr3200. It
boots and runs ok, but crashes during 3Dmark03. I am using a thermaltake
silent boost hsf and have tried 1.75 volts so far. Maybe more voltage
will
help?
tia


I've had one running 200x11 with 1.675-1.7v for months. What multiplier are
you using?

knowname wrote:
Are you guys having much luck running your 2400+ cpu's @200 fsb? I
only have crucial 2100 ddr, so I tried to run fsb at 200 with memory
at 133. I am only running asynchronously to see if it is worth buying
some ddr3200. It boots and runs ok, but crashes during 3Dmark03. I
am using a thermaltake silent boost hsf and have tried 1.75 volts so
far. Maybe more voltage will help?
tia

I have my XP1800+ TbredB running on a 200FSB, PC3200 memory, synchronus.
(10x multiplier, 1.675vcore). Currently 33°C diode temp, room temp 20°. Runs
Prime95 all night no trouble. The temp goes up to 40° though.
--
~misfit~

I've had one running 200x11 with 1.675-1.7v for months. What multiplier
are
you using?

I have tried a 10 multiplier so far. I forgot to mention that the cpu is
unlocked from factor and I am using an Asus A7N8X DLX mobo. I can boot into
windows fine at 10x200, just crashes on 3dmark03 and errors on prime95. I
haven't tried memtest86. It is a 133 fsb cpu and memory, but it runs
stable at 166 fsb. Anything higher than 166 is unstable.