A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » General
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

AGP _ DVI



 
 
Thread Tools Display Modes
  #1  
Old August 1st 03, 07:46 PM
Roland
external usenet poster
 
Posts: n/a
Default AGP _ DVI

Just purchased a NVIDIA GeForce2 MX AGP Dual-Head Video card and found
it didnt have two standard video outputs but one standard port and a
DVI port. Can anyone explain what the DVI port if for and how could I
use it?
  #2  
Old August 1st 03, 08:11 PM
Cari
external usenet poster
 
Posts: n/a
Default

For an LCD monitor usually.

Cari
www.coribright.com

"Roland" wrote in message
om...
Just purchased a NVIDIA GeForce2 MX AGP Dual-Head Video card and found
it didnt have two standard video outputs but one standard port and a
DVI port. Can anyone explain what the DVI port if for and how could I
use it?



  #3  
Old August 1st 03, 08:31 PM
Vanguard
external usenet poster
 
Posts: n/a
Default

"Roland" wrote in message
om
Just purchased a NVIDIA GeForce2 MX AGP Dual-Head Video card and found
it didnt have two standard video outputs but one standard port and a
DVI port. Can anyone explain what the DVI port if for and how could I
use it?


See http://www.webopedia.com/TERM/D/DVI.html for a definition of DVI.
Unless you have a monitor with a DVI cable to connect it, you cannot use
this output.

--
__________________________________________________ __________
** Share with others. Post replies in the newsgroup.
** If present, remove all "-nix" from my email address.
__________________________________________________ __________



  #4  
Old August 1st 03, 11:47 PM
123xxxxx
external usenet poster
 
Posts: n/a
Default

dvi port are for the tft lcd monitors leads. the earlier models of tft lcd
didnt have them the new generations do

"Roland" wrote in message
om...
Just purchased a NVIDIA GeForce2 MX AGP Dual-Head Video card and found
it didnt have two standard video outputs but one standard port and a
DVI port. Can anyone explain what the DVI port if for and how could I
use it?



  #5  
Old August 2nd 03, 11:00 AM
Sean
external usenet poster
 
Posts: n/a
Default

you need one of these to use a standard vga monitor on it
http://www.buyxtremegear.com/dvitovgaad.html

"Roland" wrote in message
om...
Just purchased a NVIDIA GeForce2 MX AGP Dual-Head Video card and found
it didnt have two standard video outputs but one standard port and a
DVI port. Can anyone explain what the DVI port if for and how could I
use it?



  #6  
Old August 2nd 03, 08:27 PM
YanquiDawg
external usenet poster
 
Posts: n/a
Default

you can buy a DVI to VGA adapror for bout $7. Do a search.

dvi port are for the tft lcd monitors leads. the earlier models of tft lcd
didnt have them the new generations do


Just purchased a NVIDIA GeForce2 MX AGP Dual-Head Video card and found
it didnt have two standard video outputs but one standard port and a
DVI port. Can anyone explain what the DVI port if for and how could I
use it?



  #7  
Old August 6th 03, 09:45 PM
Roland
external usenet poster
 
Posts: n/a
Default

Sean, Great site, $7 included fedex shipping. It arrived and the pin
config is slightly different. The adapter has a spade with two pins
each side and the one on the card has three spades, that are smaller
with no pins each side. Has anyone seen this type and can an adapter
be purchased?



"Sean" wrote in message ...
you need one of these to use a standard vga monitor on it
http://www.buyxtremegear.com/dvitovgaad.html



"Roland" wrote in message
om...
Just purchased a NVIDIA GeForce2 MX AGP Dual-Head Video card and found
it didnt have two standard video outputs but one standard port and a
DVI port. Can anyone explain what the DVI port if for and how could I
use it?

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 02:44 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.